Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
Zawartość zarchiwizowana w dniu 2024-04-19

Development of a multipurpose heat pump for domestic application

Cel



This proposal aims at the development of small heat pumps intended for heating, cooling and sanitary hot water production in single family dwellings located in moderate climates. The heat pumps to be developed are of the single stage compression type allowing to operate in the following modes :
- space cooling and sanitary hot water production
- space cooling and heat rejection to the environment
- space heating with heat extraction from the environment (or from ventilated air)
Outdoor air temperatures will be limited to -5°C during winter. The heating capacity will be in the range of 1 to 5 kW.
The work programme consists of the following elements :
- analysis of overall performance data for the operating modes listed above, taking into account meteorological conditions, and aimed at the determination of the optimal heating and cooling power levels - identification of optimal environmentally acceptable working fluid and cycle calculations
- design of a first generation prototype heat pump
- construction and performance evaluation of the heat pump
- design, construction and performance evaluation of an optimized second generation prototype.
The detailed calculation of the heat exchangers will be based upon the experience of the proposers in the field of heat transfer and thermodynamics.
For the design of the whole heat pump use will be made of computer aided design techniques allowing three dimensional analysis of the component assembly.
The performance evaluation will take into account effects of external operating conditions (temperatures), transient behaviour etc... upon power levels and COP. Also the noice level of the heat pump will be evaluated. The capacity control of the heat pump will be achieved by means of expansion valves possibly of the electronic type. The advantages of the use of compressor speed control will be investigated taking into account the costs involved.

Dziedzina nauki (EuroSciVoc)

Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.

Aby użyć tej funkcji, musisz się zalogować lub zarejestrować

Program(-y)

Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.

Temat(-y)

Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.

Zaproszenie do składania wniosków

Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.

Brak dostępnych danych

System finansowania

Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.

CSC - Cost-sharing contracts

Koordynator

Katholieke Universiteit Leuven
Wkład UE
Brak danych
Adres
300 A,Celestijnenlaan 300 A
3001 Heverlee
Belgia

Zobacz na mapie

Koszt całkowity

Ogół kosztów poniesionych przez organizację w związku z uczestnictwem w projekcie. Obejmuje koszty bezpośrednie i pośrednie. Kwota stanowi część całkowitego budżetu projektu.

Brak danych

Uczestnicy (2)

Moja broszura 0 0