Ziel
- TO STUDY THE COMPOSITION OF THE VARIOUS (INERTS AND SUBSTITUTIVE MATERIALS) CEMENTED BACKFILLS FOR STOPINGS AND THEIR MECHANICAL CHARACTERISTICS. LABORATORY TESTS.
- TO DEVELOP OPTIMIZATION OF GEOMETRICAL SCHEME FOR EXPLOITATION OF A MINING ZONE.
At both Campo Pisano and San Benedetto Mines massive, irregular shaped orebodies are mined and the ore and the wallrock are characterized by low mechanical strength so that it is not possible to open up large stopes. Mining has to be done under a stable roof, which can only be produced artificially and any subsidence on the surface has to be avoided. Therefore, only a stoping method with complete filling of the cavities can be applied. The only stoping method which complies with the requirements appears to be an underhand cut and fill method with cemented backfill. Provided the slices are accessible by a ramp system, the method can be highly mechanized.
A backfill mix has been designed composed of low cost aggregates, portland cement, replaced partly by fly ash, and water. For cemented backfill, strength and workability are the most important parameters and they were both achieved as a result of and exhaustive preliminary testing programme. With the composition adopted, a compressive strength of 10 MPa after 28 days was steadily attained. The workability, together with an accurately designed geometry of the delivery system, made the full utilization of the mixing plant capacity (ie 200 cubic metres per 8-hour shift) possible. Particularly attractive features of this method are its high flexibility, the relatively simple infrastructure required underground and the low labour requirements.
In situ measurements so far have shown unexpectedly small stress values in the backfill. Even during undermining the stresses show no excessive values, at least not for a timespan of several months. In addition, no failures of the artificial roof of the stopes have been observed even with free spans of up to 10 m.
Results from numerical calculations, in particular with the finite element method, in comparison to the in situ measurements, have shown that this method is useful for estimating the stresses in the backfill during the mining process. The finite element method can therefore be used to optimize the stoping and backfilling sequence. It seems also possible to optimize the geometry of the stopes with this method. However, the method could only be applied under the assumption of continuity and homogeneity of the emplaced backfill. With application of cemented backfill, subsidence can be totally avoided. The application of numerical calculations revealed that an arching phenomenon takes place, which distributes the load from the overlying strata to the country rock thus considerably releaving the immediate stoping are from most of the load exerted by the overlying material.
The primary aim of the project was the development and optimization of cemented backfill stoping methods in some mines which comply with the following requirements: sufficient strength of the backfill to provide an absolutely safe support to the stoppe and to prevent and subsidence of the country rock with consequent environmental damage; formation of the cemented backfill mixes having resort to low price aggregates and binders; and competitivity with current stoping methods. The research conducted has been developed according to 3 main lines: identification of the aggregates and binders most suitable for achieving the proposed objectives, determination of the loads acting on the backfill for the various stoping geometries and optimization of the stoping methods. The successful development of a proper mix design and the adequate adjustment of the concrete delivery pipelines geometry has resulted in considerable improvements in stoping operations and in the achievement of a constant quality of cemented backfill. The regularity in operations, thus achieved, has made the instalation of a monitoring system possible. The observed lack of variations in the stress distribution within the cemented backfill might be an indication that the backfilling of each slice acts as a self supporting structure, at least for the moment.
MAINLY STEPS ARE:
- ELABORATION OF ANALYTICAL MODELS,
- TESTS ON THE CEMENTED BACKFILL AND MEASUREMENTS IN "SITU",
- DEVELOPMENT OF A MODEL, MONITORING, CONTROL AND USE FOR THE OPTIMIZATION OF EXPLOITATION PATTERN.
THE POTENTIAL ECONOMICAL BENEFITS WILL RESULT FROM THE ECONOMIC OPTIMIZATION OF THE STOPINGS. VIA:
1.- THE USE OF MATERIAL SUBSTITUTIVE OF THOSE COMMONLY AND TRADITIONALLY USED;
2.- TO CARRY OUT BACKFILLINGS WITH DIFFERENT MECHANICAL PROPERTIES ACCORDING TO AREAS OF THE MINING ZONE;
3.- STUDY OF VARIANTS TO THE TRADITIONAL SCHEMES OF STOPING WITH BACKFILL.
Wissenschaftliches Gebiet (EuroSciVoc)
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
CORDIS klassifiziert Projekte mit EuroSciVoc, einer mehrsprachigen Taxonomie der Wissenschaftsbereiche, durch einen halbautomatischen Prozess, der auf Verfahren der Verarbeitung natürlicher Sprache beruht. Siehe: Das European Science Vocabulary.
Sie müssen sich anmelden oder registrieren, um diese Funktion zu nutzen
Programm/Programme
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Mehrjährige Finanzierungsprogramme, in denen die Prioritäten der EU für Forschung und Innovation festgelegt sind.
Thema/Themen
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Daten nicht verfügbar
Aufforderungen zur Einreichung von Vorschlägen sind nach Themen gegliedert. Ein Thema definiert einen bestimmten Bereich oder ein Gebiet, zu dem Vorschläge eingereicht werden können. Die Beschreibung eines Themas umfasst seinen spezifischen Umfang und die erwarteten Auswirkungen des finanzierten Projekts.
Aufforderung zur Vorschlagseinreichung
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Daten nicht verfügbar
Verfahren zur Aufforderung zur Einreichung von Projektvorschlägen mit dem Ziel, eine EU-Finanzierung zu erhalten.
Finanzierungsplan
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Finanzierungsregelung (oder „Art der Maßnahme“) innerhalb eines Programms mit gemeinsamen Merkmalen. Sieht folgendes vor: den Umfang der finanzierten Maßnahmen, den Erstattungssatz, spezifische Bewertungskriterien für die Finanzierung und die Verwendung vereinfachter Kostenformen wie Pauschalbeträge.
Koordinator
09016 Iglesias Cagliari
Italien
Die Gesamtkosten, die dieser Organisation durch die Beteiligung am Projekt entstanden sind, einschließlich der direkten und indirekten Kosten. Dieser Betrag ist Teil des Gesamtbudgets des Projekts.