Skip to main content
DeutschDE
European Commission logo print header
Inhalt archiviert am 2024-04-15

PLANNING, DEVELOPMENT AND DEMONSTRATION OF A PILOT FLEXIBLE CELL FOR DIVERSIFIED MANUFACTURING OF CLOTHING

Ziel


The objective of the project was the development of a new industrial sewing machine of far greater flexibility than normally available. The machine was made up of 2 modules with an independent top and bottom mechanism with independent drives for each, connected only by hydraulically driven pipes. A prototype was demonstrated but a real commercial system or pilot laboratory system would be different and serious shortcomings involving noise, synchronized speeds and fluid leakage are still unresolved.
THE OBJECTIVE OF THIS PROJECT IS TO DEVELOP NEW SEWING TECHNOLOGIES IN WHICH MODULES LIKE NEEDLES, BOBBINS, LOOPERS ETC. WILL BE INTERCHANGEABLE AND CAN RUN WITHOUT A CENTRAL DRIVE MOTOR.

RESEARCH AND DEVELOPMENT HAVE SHOWN, THAT THE USE OF AN HYDRAULIC DRIVE APPEARS FEASIBLE. TO BUILD A MODEL CAPABLE OF SEWING, THE HEAD OF A CUSTOMARY SEWING MACHINE SHOULD BE USED FOR THE SEWING ELEMENTS. THE CONCEPT FOLLOWED UP TILL NOW - THE ELIMINATION OF THE C-CASING - WILL CONTINUE TO BE FOLLOWED.

Wissenschaftliches Gebiet

Programm/Programme

Thema/Themen

Data not available

Aufforderung zur Vorschlagseinreichung

Data not available

Finanzierungsplan

CSC - Cost-sharing contracts

Koordinator

Pfaff Industriemaschinen GmbH
EU-Beitrag
Keine Daten
Adresse
Königstraße 154
67655 Kaiserslautern
Deutschland

Auf der Karte ansehen
Gesamtkosten
Keine Daten

Beteiligte (4)

Diese Seite teilen

Herunterladen

Letzte Aktualisierung: 24 November 1989

Mein Booklet

Permalink: https://cordis.europa.eu/project/id/RI1B0140/de

European Union, 2024