Descrizione del progetto
Etichette sensibili alla temperatura con cambio di colore permanente
I produttori stanno perdendo fino al 10 % dei prodotti nel trasporto lungo la catena del freddo a causa della mancanza di monitoraggio e controllo della temperatura dei prodotti, una cifra che peraltro non tiene conto della qualità inferiore dei prodotti conservati in modo improprio. È necessaria una soluzione per invertire questa tendenza. Il progetto T-Sense Cold, finanziato dall’UE, elaborerà un’etichetta irreversibile, sensibile alla temperatura e che cambia colore per monitorare la temperatura di ogni prodotto. L’etichetta sarà applicata all’imballaggio e cambierà in modo permanente dal bianco a uno stato di colore intenso al di sopra della temperatura di attivazione per informare gli operatori della catena del freddo che i prodotti sono pericolosamente surriscaldati. L’etichetta avrà due modalità di attivazione alternative: Contact per piccole serie di prodotti e Non-Contact per serie più grandi.
Obiettivo
T-Sense Cold represent the series of irreversible temperature-sensitive colour-changing labels for package in cold supply chains. Organic composites containing color former, color developer and co-solvent are used in these inks to define the temperature where the color changes between colored (black, blue, magenta, red) and discolored. Such composites are usually protected in microcapsules and applied in an appropriate binder system to obtain printing ink that changes color reversibly when heated/cooled across the activation temperature (TA). Our innovation starts here – we realize the irreversible (permanent) color change by re-combination of similar substances using advanced chemical engineering. Below TA the new ink is white and permanently colors above TA. The color change is activated in the cold chain environment, e.g. at the packaging of temperature-sensitive food. Two types of activation are planned, contact - for small series and noncontact for large series. Both activation possibilities are our innovations for applications in the cold chain.
Why is this important? Because each producer that enters cold chain should count at least 10% of the turnover as a waste due to lack of control in the chain! Here we are dividing the responsibility among all actors across the supply chain and empower producers to increase the level of control in production. This problem is our business opportunity. We have started MyCol company as a spin-off from National Institute of Chemistry, Slovenia. We produce innovative labels, new at the global level, applicable to any reasonably smooth surface, low-cost, needing no energy supply, which show temperature changes in the cold chain with the naked eye (or by video camera). The market size for the cold chain is huge and increases with high CAGR, especially on the organic food market. We are aiming to reach a 1% share of the European single market, becoming a regional pioneer in this area of advanced materials for food safety.
Campo scientifico
- engineering and technologymaterials engineeringcolors
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensorsoptical sensors
- engineering and technologymaterials engineeringcomposites
- engineering and technologyother engineering and technologiesfood technologyfood safety
- engineering and technologychemical engineering
Parole chiave
Programma(i)
Invito a presentare proposte
Vedi altri progetti per questo bandoBando secondario
H2020-EIC-SMEInst-2018-2020-4
Meccanismo di finanziamento
SME-2 - SME instrument phase 2Coordinatore
1000 Ljubljana
Slovenia
L’organizzazione si è definita una PMI (piccola e media impresa) al momento della firma dell’accordo di sovvenzione.