Opis projektu
Prace nad niedrogim aparatem RM na potrzeby fizjoterapii/reumatologii
Finansowany ze środków UE projekt PR scanner stanowi ostatni etap rozwoju nowej technologii obrazowania medycznego opartej na tanim, wysokowydajnym obrazowaniu metodą rezonansu magnetycznego (RM). Nowy, niedrogi aparat na potrzeby fizjoterapii/reumatologii wykorzystuje opatentowane techniki obrazowania metodą rezonansu magnetycznego oraz nową, otwartą, wysokowydajną konsolę do badania metodą rezonansu magnetycznego (ang. Magnetic Resonance Control System). Bieżący projekt ma na celu komercjalizację wysokowydajnych zestawów do zastosowań w medycynie sportowej, w tym w klubach sportowych i klinikach fizjoterapii/reumatologii. Jego celem jest dostarczenie komercyjnego planu dla ostatecznej konfiguracji oraz przeprowadzenie procesów certyfikacji medycznej w Europie i Stanach Zjednoczonych do czasu zakończenia projektu.
Cel
Histo-MRI is a FET-Open project finishing at the end of 2020, coordinated by CSIC and with the key participation of LUMC. The main goal of Histo-MRI was the development of a new imaging technology capable of unprecedented spatial and temporal resolution. As part of this highly ambitious challenge, we have developed disruptive hardware, as well as cutting-edge spatial encoding and image reconstruction methods. One particularly successful line of research within Histo-MRI was low field MRI, where we have built a single-purpose, affordable Physiotherapy/Rheumatology scanner (the PR Gen I scanner), patented four families of MRI methods, and created a new open-source high-performance MR console (MaRCoS: Magnetic Resonance Control System).
PhysioMRI Tech S.L. is a recent spin-off from the Histo-MRI project, participated by both CSIC and LUMC members. Ultimately, we aim to commercialize high performance, low field setups massively in sports clubs and physiotherapy and rheumatology clinics. We will consider this project successful if by its end we have deployed the commercial plan we have devised for our PR Gen I scanner, updated with MaRCoS and advanced encoding and reconstruction methods. We envision three stages in this process: i) in the first six months, we will duplicate the original LUMC PR – Gen I system at the PhysMRI laboratories and benchmark its performance; ii) next, we will go to a second round of investment; and iii) we will build ten systems and site them at sports clubs, physiotherapy and rheumatology clinics, where we will run these systems in real clinical environments. Once these steps are accomplished, we will start the medical certification processes in Europe and USA, right after the end of this project.
Dziedzina nauki
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringcontrol systems
- medical and health sciencesclinical medicinerheumatology
- medical and health sciencesclinical medicinephysiotherapy
- engineering and technologymedical engineeringdiagnostic imagingmagnetic resonance imaging
Słowa kluczowe
Program(-y)
Zaproszenie do składania wniosków
Zobacz inne projekty w ramach tego zaproszeniaSzczegółowe działanie
H2020-FETOPEN-2018-2019-2020-4
System finansowania
CSA - Coordination and support actionKoordynator
46530 PUCOL
Hiszpania
Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.