Opis projektu
Akumulatory litowo-jonowe z ulepszoną katodą: nadzieja dla pojazdów elektrycznych
Mieszane tlenki metali: litu, niklu, manganu i kobaltu (NMC) są klasą materiałów elektrodowych, które dzięki wysokiej stabilności termicznej mogą być stosowane w produkcji akumulatorów litowo-jonowych. Zastosowanie tych materiałów zapewnia większą pojemność, szybkość cyklu ładowania i moc akumulatorów. Finansowany w ramach programu działań „Maria Skłodowska-Curie” projekt UltraThick Las ma na celu opracowanie ultragrubych elektrod – kolejnej innowacji służącej zwiększeniu wydajności elektrochemicznej akumulatorów wykorzystujących NMC. W swojej pracy uczeni wykorzystają modele głębokości penetracji i zaawansowane techniki spektroskopii, takie jak spektroskopia magnetycznego rezonansu jądrowego i spektroskopia emisyjna wzbudzana laserem, do identyfikacji ścieżek dyfuzji litu w elektrodach. Nowe akumulatory litowo-jonowe z ultragrubymi katodami mogłyby znaleźć szerokie zastosowanie w pojazdach elektrycznych.
Cel
"The proposal aims to improve the electrochemical power performance of NMC based generation 3b batteries through the development of ultra-thick electrodes. This will be done through the following objectives:
1.) Increased power performance in ultra-thick-film electrodes through the development of 3D electrode architectures
2.) Correlation of lithium-ion diffusion characteristics with 3D electrode architectures and related electrochemical performances through simple modeling via Penetration Depth Model (PDM)
3.) Establishment of Nuclear Magnetic Resonance (NMR) techniques and Laser-Induced Breakdown Spectroscopy (LIBS) as complementary methods for identification of lithium-diffusion pathways in 3D electrodes
4.) Realization of optimized 3D electrode architectures for anodes and cathodes prepared with environmentally friendly water-based slurries.
This will be done through a multi-discipline approach that involves the following techniques and principles: laser based ablation, ablated materials recycling, water based formulation, Nuclear Magnetic Resonance Imaging and Penetration Depth Model. Laser ablation will be used to fabricate 3D microstructures in ultra-thick NMC (nickel-manganese-cobalt oxide) based electrodes to increase the electrode porosity and help attain optimum cell power density of upto 209 Wh/kg at 2C cycling. The optimization of the 3D ablation patterns will be done through the correlating the electrode's power performance with its diffusion coefficient (determined via NMR imaging), electrode parameters and effective porosity via the PDM. Water based slurry formulation and ablated materials recycling will be done in conjunction to decrease production cost and allow laser ablation processing for electrodes closer to ""demonstration pilot level"" (TRL 5-6). Upon success of the project, NMC based generation 3b batteries can be realized for electric vehicle applications and we could reach on of the goals stated in Horizon 2021's Work Program."
Dziedzina nauki
- engineering and technologyenvironmental engineeringwaste managementwaste treatment processesrecycling
- natural scienceschemical scienceselectrochemistry
- social sciencessocial geographytransportelectric vehicles
- engineering and technologymedical engineeringdiagnostic imagingmagnetic resonance imaging
- natural sciencesphysical sciencesopticslaser physics
Program(-y)
- HORIZON.1.2 - Marie Skłodowska-Curie Actions (MSCA) Main Programme
Zaproszenie do składania wniosków
Zobacz inne projekty w ramach tego zaproszeniaSystem finansowania
HORIZON-AG-UN - HORIZON Unit GrantKoordynator
76131 Karlsruhe
Niemcy