Building Active MicroLED displays By Additive Manufacturing

Informazioni relative al progetto

BAMBAM

ID dell’accordo di sovvenzione: 101070085

DOI

10.3030/101070085

Progetto chiuso

Data della firma CE 23 Giugno 2022

Data di avvio 1 Settembre 2022

Data di completamento 31 Agosto 2025

Finanziato da

• Digital, Industry and Space

Costo totale

€ 4 293 264,17

Contributo UE

€ 4 293 263,29

Coordinato da

ALEDIA
France

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Documents, reports (3)

Report on dissemination and communication activities: 1st Version

1st version of the report on dissemination and communication activities

Electronics to operate the µLED arrays in a passive (passive RGB µLEDs) or active mode (active pixels) mode
Report on dissemination and communication activities: 2nd version

FInal version of the report on dissemination and communication activities

Demonstrators, pilots, prototypes (4)

First fully processed demonstrator substrate available for module assembly

First fully processed demonstrator substrate available for module assembly:The first fully processed µ-LED matrix display substrate for the final demonstrator is ready for module assembly

Display prototype of the 2nd demonstrator
Operational Test Vehicle

Operational Test Vehicle:adressable 4x4 pixel matrix with transferred and contacted µ-LED chips ready as test vehicule for full demonstrator develpoment

Final 2nd demonstrator with all picture improvements

Pubblicazioni

Peer reviewed articles (3)

Building Active Matrix MicroLED Displays by Additive Manufacturing (BAMBAM) – Paving the Way to a Sustainable Fine Pitch Video Wall

Autori: Emmanuel Fuchs, Prasanna Ramaswamy, Holger Baur, Sławomir Drozdek, Dave Keeshan, Patrick Willem, Arthur Moisset, Christophe Linchenau, Aymeric Dufauret, Hugues Lebrun, Davina Moodelly, Elisabeth Jacquin, Thibault Catelain, Frédéric Vachelard, Denis Groeninck, Alin Fecioru, Iwona Grądzka-Kurzaj, Aneta Wiatrowska, Clint Meyer, null Matt Meitl, Kai Waldner, Norbert Fruehauf, Mohammad Kiaee, Igor Nakonechnyi, Willem Walrevens, Madeleine Vandenabeele, Matthias Cosaert
Pubblicato in: Proceedings of the International Display Workshops, 2025, ISSN 1883-2490
Editore: International Display Workshops General Incorporated Association
DOI: 10.36463/IDW.2023.0327

InP-based Quantum Dot Solutions for Efficient and Reliable Color Conversion in MicroLED Applications

Autori: Himanshu Jena, Mohammad Kiaee, Igor Nakonechnyi, Willem Walravens
Pubblicato in: Proceedings of the International Display Workshops, 2025, ISSN 1883-2490
Editore: International Display Workshops General Incorporated Association
DOI: 10.36463/IDW.2023.0918

Printed Chip Interconnects for MicroLED Displays

Autori: Kai Waldner; Holger Baur; Patrick Schalberger; Norbert Fruehauf; Emmanuel Fuchs; Prasanna Ramaswamy; Vincent Toomey; Sławomir Drozdek
Pubblicato in: Journal of the Society for Information Display, 2025, ISSN 1938-3657
Editore: Wiley: The Society for Information Display
DOI: 10.1002/JSID.2109

Conference proceedings (4)

Eliminating TFT backplanes in microLED displays using ultra precise deposition (UPD) printed interconnects

Autori: Waldner K et al.
Editore: Electronic Display Conference
DOI: 10.5281/ZENODO.17659252

Building Active Matrix By Additive Manufacturing (BAMBAM)

Autori: Lebrun et al.
Editore: EuroDisplay 2022
DOI: 10.5281/ZENODO.17659269

Printed Chip Interconnects for MicroLED Displays

Autori: Waldner et al.
Editore: EuroDsiplay 2024
DOI: 10.5281/ZENODO.17659226

Process Considerations for Ultraprecise Deposition Printing on Flexible Substrates

Autori: Martin Roemhild, Kai Waldner, Holger Baur, Norbert Fruehauf
Pubblicato in: 2024 IEEE International Flexible Electronics Technology Conference (IFETC), 2025
Editore: IEEE
DOI: 10.1109/IFETC61155.2024.10771840