Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano italiano
CORDIS - Risultati della ricerca dell’UE
CORDIS
Contenuto archiviato il 2024-05-30

Large X-ray Detectors for Coloured X-ray Imaging

Obiettivo

This proposal addresses the development of large x-ray detectors combined with photon counting read-out electronics to provide information on the energy of the absorbed x-ray photons that will help doctors improve their diagnosis and could lead to a reduction of radiation for patients. The requirements for such X-ray detectors can only be met by semiconductor detectors. They provide high efficiency and high spatial resolution because semiconductors convert radiation directly into charge carriers. Although real progress has been made over the past years in the development of microelectronics and in material engineering resulting in novel devices, these improvements are not sufficient for the production of semiconductor detectors for large area x-ray imaging. The dramatic improvement of readout electronics with resolution down to 55µm pitch in combination with high sensitive Photon Counting readout electronics that has been achieved recently opens the route to semiconductor detectors with a significant improvement figure of merit (high resolution & high sensitivity). The development of X-ray sensors is focused on CdTe and (Cd,Zn)Te which combine high sensitivity (high mobility lifetime products), high energy resolution (electron-hole-pair energy 4.41 eV), and sufficiently advanced micro-electronic technology. (Cd,Zn)Te sensors can operate at ambient temperatures and the material is chemically stable up to 1000 oC. However, despite the clear potential of CZT technology for large area sensors no such system is presently available on the market. A possible solution to overcome these limitations is the deposition of CZT thick films with the required detector performance. This proposal involves 2 partners who intend to strengthen their collaboration in this field through a structured exchange of expertise that will benefit them directly as well as end users of the technology that they will develop.

Campo scientifico (EuroSciVoc)

CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: https://op.europa.eu/it/web/eu-vocabularies/euroscivoc.

È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione

Parole chiave

Parole chiave del progetto, indicate dal coordinatore del progetto. Da non confondere con la tassonomia EuroSciVoc (campo scientifico).

Argomento(i)

Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.

Invito a presentare proposte

Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.

FP7-PEOPLE-2007-3-1-IAPP
Vedi altri progetti per questo bando

Meccanismo di finanziamento

Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.

MC-IAPP - Industry-Academia Partnerships and Pathways (IAPP)

Coordinatore

EURORAD 2 6
Contributo UE
€ 518 269,00
Indirizzo
Rue Ettore Bugatti, 2
67201 Eckbolsheim
Francia

Mostra sulla mappa

Tipo di attività
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Collegamenti
Costo totale

I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.

Nessun dato

Partecipanti (1)

Il mio fascicolo 0 0