Cel
DeSiReH focus on both, the numerical design tools and the experimental measurement techniques for cryogenic conditions, with the objective to improve the industrial design process for laminar wings in terms of product quality, efficiency, and development cost reduction. The work focuses on the design of high lift devices. DeSiReH addresses the following quantified objectives which will make a significant contribution to meeting Vision 2020 goals: 1) Reduction of industrial A/C development costs by 5% by reduced and more efficient Wind Tunnel Testing 2) Decrease time-to-market by 5% by improved aerodynamic design turn-around time 3) Improve industrial High-Lift design process efficiency by 15% 4) Reduce A/C drag by 5% by enabling NLF though compatible High-Lift-Design To accomplish these objectives the project is planned for a period of 4 years and a budget of 7.6 Mio. Euro. The consortium consists of 6 industry partner, 7 research establishments, 3 universities, 2 small and medium-sized enterprise and the European Transonic Wind tunnel (ETW). Existing and validated high-fidelity numerical tools are composed to an efficient High-Lift design and optimization process chain in WP1. The strategies and tools developed are applied in WP 2 to the aerodynamic design of a high lift system for the future pointing HARLS wing (High Aspect Ratio Low Sweep) with the constraint to maintain Natural Lamiar Flow at cruise to the best possible extend. WP 3 focuses on the improvement of the experimental measurement technique for cryogenic testing. The objectives here are to enhance the measurement accuracy of the results and to generate the capability to apply different important techniques (e.g. transition measurement & deformation measurement). These techniques are finally applied in the ETW at High-Reynolds-Numbers on the HARLS model equipped with the High-Lift-System, designed in WP2. The final assessment of DeSiReH results is done in WP4 by assessing the numerical
Dziedzina nauki
Słowa kluczowe
Zaproszenie do składania wniosków
FP7-AAT-2008-RTD-1
Zobacz inne projekty w ramach tego zaproszenia
System finansowania
CP-FP - Small or medium-scale focused research projectKoordynator
51147 Koln
Niemcy
Zobacz na mapie
Uczestnicy (20)
21129 Hamburg
Zobacz na mapie
28906 Getafe (Madrid)
Zobacz na mapie
75008 Paris
Zobacz na mapie
00185 Roma
Zobacz na mapie
1930 Zaventem
Zobacz na mapie
2132 HZ Hoofddorp
Zobacz na mapie
51147 Koln
Zobacz na mapie
21129 Hamburg
Zobacz na mapie
81043 Capua
Zobacz na mapie
164 90 Stockholm
Zobacz na mapie
1059 CM Amsterdam
Zobacz na mapie
28850 Torrejon De Ardoz Madrid
Zobacz na mapie
91120 Palaiseau
Zobacz na mapie
140180 ZHUKOVSKY
Zobacz na mapie
38106 Braunschweig
Zobacz na mapie
80138 Napoli
Zobacz na mapie
35122 Padova
Zobacz na mapie
28844 WEYHE
Zobacz na mapie
31060 Toulouse
Zobacz na mapie
90431 NÜRNBERG
Zobacz na mapie