Cel
EPT 300 aims to be a decisive step forward to strengthen Europe’s leading position in power semiconductor technologies and More-than-Moore manufacturing capabilities relating to energy efficient electronic solutions. Power semiconductor devices fabricated in a European leading pilot line for 300mm wafer production are the scope of the project, for which manufacturing excellence, cost competitiveness and challenging applications are critical boundary conditions.
The project will thus address challenges in the research on process technologies, production technologies and handling and automation for advanced power technologies based on 300mm wafers:
• Wafer substrate materials for 300mm diameter thin wafers for power applications
• New process capabilities and technology approaches
• Enabling of processing equipment with capabilities specially derived from the requirements of manufacturing power devices on thin 300mm wafers
• Handling and automation concepts for thin wafer and special requirements of More-than-Moore fabrication lines
• Coexistence strategies for integrated multi-wafer-diameter manufacturing
• Application requirements for demonstrator application and corresponding quality requirement profiles
With the intended research it is planned to achieve the realization of demonstrators in a pilot line and to demonstrate the readiness for production in large scale production environment based on selected products and technologies. The demonstrator will be verified in a fully functional energy efficient power application. By this project, the base toward future enhancements in power technologies will be made.
With the help of EPT300, the European semiconductor manufacturing and the European equipment & materials industries will be the worldwide first with a 300mm power semiconductor processing line dedicated to power device production. By this, EPT300 will be an important step towards realizing leading edge manufacturing capabilities in Europe.
Dziedzina nauki
Temat(-y)
Zaproszenie do składania wniosków
ENIAC-2011-2
Zobacz inne projekty w ramach tego zaproszenia
System finansowania
JTI-CP-ENIAC - Joint Technology Initiatives - Collaborative Project (ENIAC)Koordynator
9500 Villach
Austria
Zobacz na mapie
Uczestnicy (22)
01099 Dresden
Zobacz na mapie
85579 Neubiberg
Zobacz na mapie
9500 Villach
Zobacz na mapie
1322 AP ALMERE
Zobacz na mapie
1120 WIEN
Zobacz na mapie
9524 VILLACH SANKT MAGDALEN
Zobacz na mapie
9500 Villach
Zobacz na mapie
9020 Klagenfurt am Wörthersee
Zobacz na mapie
5684 PC Best
Zobacz na mapie
9500 VILLACH
Zobacz na mapie
1070 WIEN
Zobacz na mapie
9531 Bleiberg-Kreuth
Zobacz na mapie
90431 Nurnberg
Zobacz na mapie
20021 Baranzate Milano
Zobacz na mapie
81677 Munchen
Zobacz na mapie
01109 Dresden
Zobacz na mapie
01069 Dresden
Zobacz na mapie
01099 DRESDEN
Zobacz na mapie
5612 AE Eindhoven
Zobacz na mapie
5692 EM Son
Zobacz na mapie
75018 PARIS
Zobacz na mapie
7623CS Borne
Zobacz na mapie