Cel
The object of this project is to update the concept of aero-engine dressing to the most advanced concepts already used in commercial aircrafts.
The existing design concepts and components utilised within the engine dressings have remained largely static for a long period of time; there is little difference in the components and materials used in the engine dressings on the latest Trent engines to the early RB211’s.
In today’s competitive aero-engine market, the primary product discriminators are cost-driven. Typical cost savings of 20-30% delivered by PMCs in replacing incumbent metal parts; therefore, provide added incentive for wider application of these materials. With these impressive advantages on offer, it may seem difficult to understand why composite materials do not dominate the latest civil and military engines.
COMPipe will allow to design and manufacture an agreed set of non-metallic pipes and support systems to replace traditional metallic variants in engine dressings. It will also identify the manufacturing processes that could be used to scale up the production requirements to meet future delivery needs.
The scientific and technical objectives to reach along the project will be
i. To design and develop a new concept of non-metallic pipes and fittings suited for aero-engines, specifically drains, scavenge, sensor and vent lines
ii. To select materials meeting the required environmental constrains, both in the range of temperatures and in the chemical resistance to different products present in the aero-engine, such as Skydrol hydraulic fluid, oil and aviation fuel.
iii. To develop one or more manufacturing practices and to improve existing methodologies driving to
a. To a product standard with a near to zero wall´s porosity
b. To produce 3D geometries of according to the already existing metallic technology.
c. To assess the future full automation of the process.
d. To ensure that Nadcap qualification will be reached in a short time
Dziedzina nauki
- engineering and technologymaterials engineeringcomposites
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraft
- social sciencessociologyindustrial relationsautomation
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensors
- engineering and technologyenvironmental engineeringenergy and fuels
Zaproszenie do składania wniosków
SP1-JTI-CS-2012-01
Zobacz inne projekty w ramach tego zaproszenia
System finansowania
JTI-CS - Joint Technology Initiatives - Clean SkyKoordynator
LE10 3BP HINKLEY LEICESTERSHIRE
Zjednoczone Królestwo