Obiettivo
The aims of DESSIS are to:
- enhance the set of tools currently available to the smart-power system designer by making device-level and mixed-mode circuit/device simulation feasible within the circuit design environment
- enhance currently available 3-D device simulation codes to account for all the physical mechanisms important for the operation of EPROM and flash EEPROM memory devices.
Circuit and device equations have been merged, so that power devices can be simulated within their circuit environment, with the appropriate dimensionality required by their geometrical structure. To date, the simulation code SIMUL handles multiple 1-dimensional, 2-dimensional and 3-dimensional devices within the same circuit, as well as SPICE-like device models for both passive and active components. SIMUL supports both direct current (DC) and time dependent circuit analyses with no restriction on circuit topology, thus making it possible to simulate the switching behaviour of complex power devices, accounting for the input driving, as well as the output load and clamping circuitry. SIMUL's physical model supports the heat flow equation in addition to the drift diffusion model of current transport; hence, the influence of device self heating is fully accounted for.
Physical level multidimensional device analysis tools suitable for power and floating gate device simulations have been developed. To this purpose, the hydrodynamic model of current transport in semiconductors and the heat flow equation have been implemented within the 3-dimensional simulator HFIELDS, thus allowing for a very general energy transport model which overcomes previous simplifying assumptions such as that of a local thermal equilibrium between lattice and carriers, or that of an isothermal lattice. The code currently supports the Fowler-Nordheim tunnelling mechanism across the gate oxide, while the implementation of the band to band tunnelling is scheduled in the near future. Finally, hot electron and hot hole injection into the gate of erasable programmable read only memory (EPROM) and electrically erasable programmable read only memory (EEPROM) cells will be supported.
These goals are being pursued by:
- Merging circuit/device equations, so that power devices can be simulated within their circuit environment, with the appropriate dimensionality required by their geometrical structure. To date, the simulation code SIMUL handles multiple 1-D, 2-D and 3-D devices within the same circuit, as well as SPICE-like device models for both passive and active components. SIMUL supports both D.C. and time-dependent circuit analyses with no restriction on circuit topology, thus making it possible to simulate the switching behaviour of complex power devices, such as IGBTs or GTOs, accounting for the input driving, as well as the output load and clamping circuitry. SIMUL's physical model supports the heat-flow equation in addition to the drift-diffusion model of current transport: hence, the influence of device self-heating is fully accounted for.
- Developing physical-level multi-dimensional device analysis tools suitable for power- and floating-gate-device simulations. To this purpose, the hydrodynamic model of current transport in semiconductors and the heat-flow equation have been implemented within the 3-D simulator HFIELDS, thus allowing for a very general energy-transport model which overcomes previous simplifying assumptions such as that of a local thermal equilibrium between lattice and carriers, or that of an isothermal lattice. The code currently supports the Fowler-Nordheim tunnelling mechanism across the gate oxide, while the implementation of the band-to-band tunnelling is scheduled in the near future. Finally, hot-electron and hot-hole injection into the gate of EPROM and EEPROM cells will be supported.
- Developing a common User's Simulation Environment (USE) for user-friendly structure definition and mesh generation. The latter will conform to international standards and rely upon a general Standard Process Representation (SPR) and Standard Wafer Representation (SWP). Both SIMUL and HFIELDS will be supported by USE; thus, tool integration will fully be achieved within the DESSIS Project. Also, interface with process-modelling tools to be developed and/or enhanced within the PROMPT Project will be pursued, with the aim of generating a state-of-the-art TCAD simulation environment.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- scienze naturali matematica matematica pura topologia
- scienze naturali scienze fisiche elettromagnetismo ed elettronica semiconduttività
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Dati non disponibili
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Dati non disponibili
Coordinatore
40136 Bologna
Italia
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.