Rezultaty Documents, reports (6) Communication PLan (including communication guidelines) D7.1 will define the Communication Plan as a living document, being constantly updated throughout the project. This communication plan will articulate communication targets, prioritise channels and plan the creation of re-usable content, and it will support the RESOLVE partners in their external communications. It will also include metrics to evaluate the effectiveness of the communication activities by keeping track of objective measures. Quality Plan A detailed quality plan (QP) will be defined to assess and review the overall quality of the project. The purpose of the QP will be to describe the actions and measures that will be undertaken by the Consortium in order to ensure the quality of the project and its full conformance with its contractual requirements. The QP will also analyse possible critical issues and define appropriate recovery actions through a risk management strategy. Definition of user needs and market potential Report encloses quantitative and qualitative user needs based on existing surveys, literature data and new collected data. Also forecast of market potential is part of the deliverable as a result of market analysis and trends for L-category vehicles. Exploitation plan Report encloses a preliminary Business Plan that will support the exploitation of results towards the wider EU Two-Wheelers industry. The exploitation plan will be based on an Initial Market Analysis Literature review and feasibility studies of different architectures Report mainly focused on the comparative analysis of different architectures of tilting 4 wheelers carried out by means of simplified dynamic models. Exploitation and Dissemination Report The content of the report is: - updated business plan based on actual market figures and achieved project results. - Exploitation of results done by protecting and/or licensing technical solutions resulted from project activities. - Dissemination and exploitation of developed models and scientific results in taught academic courses (i.e. mechanical and vehicle engineering) Demonstrators, pilots, prototypes (4) Vehicle demonstrator 2 Vehicle demonstrator 2 (KTM) resulted from integration of outcomes of vehicle architecture design (WP2), powertrain package developed in WP3 and control system (WP4) as well as HMI prototype. HMI prototype (final version for vehicle demonstrators) Report will describe the final version of the HMI prototype, as well as the activities conducted to release it in order to be integrated in the demonstrators (as planned in WP6). In details, the deliverable will describe the preliminary usability test and the methodology employed to evaluate the HMI impact in terms of improvement of the vehicle’s comfort (usability, safety and compatibility with the ergonomic constraints). The deliverable will also report the analysis of the collected data and the result of the evaluation of the HMI prototype. Vehicle demonstrator 1 Vehicle demonstrator 1 (PIAGGIO) resulted from integration of outcomes of vehicle architecture design (WP2), powertrain package developed in WP3 and control system (WP4) as well as HMI prototype. Tilting Three wheelers vehicle demonstrator An additional tilting three wheelers demonstrator will be constructed that will benefit from primary D1 vehicle structure development and will integrate DMM component. Publikacje Conference proceedings (7) Simulazione multibody di un veicolo basculante a 4 ruote Autorzy: Bucchi, F Università di Pisa ; Frendo, F; Vestri, A; Di Tanna, O Opublikowane w: AIAS Conference Proceedings, 2017 Wydawca: AIAS Conference Proceedings DOI: 10.5281/zenodo.1247419 Managing cost drivers: the case of RESOLVE project Autorzy: Riccardo Giannetti; Riccardo Lanzara; Laura Risso Opublikowane w: MAR conference proceedings, 2016 Wydawca: MAR conference proceedings DOI: 10.5281/zenodo.1299621 Challenges and opportunities in the HMI design for EV Autorzy: Calefato, Caterina; Guidotti Leandro; Landini Elisa; Montanari Roberto; Tesauri Francesco Opublikowane w: 11 th ITS European Congress 2016, 2016 Wydawca: 11 th ITS European Congress 2016 DOI: 10.5281/zenodo.161515 Far far away: driving HMI requirements towards the comfortable range in Electric Vehicles Autorzy: Calefato, Caterina, RELAB Landini Elisa, RELAB Berzi lorenzo, UniFI Opublikowane w: EMENDER 2015 workshop (Energy ManagemENt Data ElaboRation), 2015 Wydawca: EMENDER 2015 workshop (Energy ManagemENt Data ElaboRation) DOI: 10.5281/zenodo.161504 Analisi dinamica di veicoli basculanti con 3 o 4 ruote Autorzy: F. Bucchi, F. Cerù, F. Frendo Opublikowane w: AIAS – ASSOCIAZIONE ITALIANA PER L’ANALISI DELLE SOLLECITAZIONI, Issue 44◦ CONVEGNO NAZIONALE, 2-5 SETTEMBRE 2015, – UNIVERSITÀ DI MESSINA, 2015, Page(s) 01-09, ISBN 9788-869380631 Wydawca: www.aiasnet.it DOI: 10.5281/zenodo.1247425 Design of novel tilting electric four-wheelers Autorzy: F. Bucchi, F. Frendo, D. Simic, O. di Tanna, M. Perterer Opublikowane w: International IFZ Conference, Issue Annually, 2016, Page(s) 01-20 Wydawca: IFZ Conference DOI: 10.5281/zenodo.1247428 Understanding the User Needs in the Electric Mobility System: a Survey Study Autorzy: Caterina Calefato, Serena Fruttaldo, Elisa Landini, Roberto Montanari (RELAB) Lorenzo Berzi, Massimo Delogu, Marco Pierini (University of Florence) Opublikowane w: EU Conference on Human Centred Design for ITS, 2016 Wydawca: Humanist DOI: 10.5281/zenodo.160041 Peer reviewed articles (3) Stability analysis of a novel four-wheeled motorcycle in straight running Autorzy: Francesco Bucchi, Francesco Cerù, Francesco Frendo Opublikowane w: Meccanica, Issue 52/11-12, 2017, Page(s) 2603-2613, ISSN 0025-6455 Wydawca: Kluwer Academic Publishers DOI: 10.1007/s11012-017-0645-x Electric L-category Vehicles for Smart Urban Mobility Autorzy: Mario Santucci, Marco Pieve, Marco Pierini Opublikowane w: Transportation Research Procedia, Issue 14, 2016, Page(s) 3651-3660, ISSN 2352-1465 Wydawca: Elsevier B.V. DOI: 10.1016/j.trpro.2016.05.433 Modelling and Simulations of a Narrow Track Tilting Vehicle Autorzy: J. J. Chong, J. Marco, D. Greenwood Opublikowane w: Exchanges: the Warwick Research Journal, Issue Biannual, 2016, Page(s) 86-105, ISSN 2053-9665 Wydawca: University of Warwick Book chapters (1) Safety aspects of the design of vehicles Autorzy: J. Kovanda et al. Opublikowane w: 2016 Wydawca: České vysoké učení technické v Praze Wyszukiwanie danych OpenAIRE... Podczas wyszukiwania danych OpenAIRE wystąpił błąd Brak wyników
