Seven Nanometer Technology

Publicaciones

Attenuated phase shift mask for extreme ultraviolet: can they mitigate three-dimensional mask effects?

Autores: A. Erdmann, P. Evanschitzky, H. Mezilhy, V. Philipsen, E. Hendrickx, M. Bauer
Publicado en: Journal of Micro/Nanolithography, MEMS, and MOEMS, Edición 18/01, 2019, Página(s) 1, ISSN 1932-5150
Editor: S P I E - International Society for Optical Engineering
DOI: 10.1117/1.jmm.18.1.011005

Advanced EUV mask and imaging modeling

Autores: Peter Evanschitzky, Andreas Erdmann
Publicado en: Journal of Micro/Nanolithography, MEMS, and MOEMS, Edición 16/04, 2017, Página(s) 1, ISSN 1932-5150
Editor: S P I E - International Society for Optical Engineering
DOI: 10.1117/1.jmm.16.4.041005

Characterization and mitigation of 3D mask effects in extreme ultraviolet lithography

Autores: Andreas Erdmann, Dongbo Xu, Peter Evanschitzky, Vicky Philipsen, Vu Luong, Eric Hendrickx
Publicado en: Advanced Optical Technologies, Edición 6/3-4, 2017, ISSN 2192-8584
Editor: De Gruyter
DOI: 10.1515/aot-2017-0019

Autores: V. Soltwisch, A. Haase, J. Wernecke, J. Probst, M. Schoengen, S. Burger, M. Krumrey, F. Scholze
Publicado en: Physical Review B, Edición 94/3, 2016, ISSN 2469-9950
Editor: The American Physical Society
DOI: 10.1103/PhysRevB.94.035419

High Mobility Materials on Insulator for Advanced Technology Nodes

Autores: W. Schwarzenbach, C. Figuet, D. Delprat, C. Veytizou, I. Huyet, C. Tempesta, L. Ecarnot, J. Widiez, V. Loup, J.-M. Hartmann, P. Besson, C. Deguet, F. Mazen, B.-Y. Nguyen, C. Maleville
Publicado en: ECS Transactions, Edición 66/4, 2015, Página(s) 31-37, ISSN 1938-5862
Editor: Electrochemical Society, Inc.
DOI: 10.1149/06604.0031ecst

Characterizing electron beam induced damage in metrology and inspection of advance devices

Autores: Violeta Navarro, Hamed Sadeghian, Abbas Mohtashami, Ilan Englard, Dror Shemesh, Nitin Singh Malik
Publicado en: 33rd European Mask and Lithography Conference, 2017, Página(s) 17, ISBN 9781-510613577
Editor: SPIE
DOI: 10.1117/12.2279707

Enabling sub-10nm node lithography: presenting the NXE:3400B EUV scanner

Autores: Mark van de Kerkhof, Hans Jasper, Leon Levasier, Rudy Peeters, Roderik van Es, Jan-Willem Bosker, Alexander Zdravkov, Egbert Lenderink, Fabrizio Evangelista, Par Broman, Bartosz Bilski, Thorsten Last
Publicado en: Extreme Ultraviolet (EUV) Lithography VIII, 2017, Página(s) 101430D
Editor: SPIE
DOI: 10.1117/12.2258025

Diffuser concepts for in-situ wavefront measurements of EUV projection optics

Autores: Mark A. van de Kerkhof, Uwe Zeitner, Torsten Feigl, Stefan Bäumer, Robbert Jan Voogd, Ad Schasfoort, Evert Westerhuis, Wouter Engelen, Manfred Dikkers, Yassin Chowdhury, Michael D. Kriese
Publicado en: Extreme Ultraviolet (EUV) Lithography IX, 2018, Página(s) 24, ISBN 9781-510616592
Editor: SPIE
DOI: 10.1117/12.2297433

EUV lithography industrialization progress

Autores: Roderik van Es, Mark van de Kerkhof, Leon Levasier, Rudy Peeters, Hans Jasper
Publicado en: International Conference on Extreme Ultraviolet Lithography 2017, 2017, Página(s) 2, ISBN 9781-510613751
Editor: SPIE
DOI: 10.1117/12.2281184

EUV for HVM: towards and industrialized scanner for HVM NXE3400B performance update

Autores: Mark A. van de Kerkhof, Arthur W. E. Minnaert, Marco Pieters, Hans Meiling, Joost Smits, Rudy Peeters, Roderik van Es, Geert Fisser, Jos W. de Klerk, Roel Moors, Eric Verhoeven, Leon Levasier
Publicado en: Extreme Ultraviolet (EUV) Lithography IX, 2018, Página(s) 13, ISBN 9781-510616592
Editor: SPIE
DOI: 10.1117/12.2299503

EUV lithography performance for manufacturing: status and outlook

Autores: Alberto Pirati, Rudy Peeters, Daniel Smith, Sjoerd Lok, Martijn van Noordenburg, Roderik van Es, Eric Verhoeven, Henk Meijer, Arthur Minnaert, Jan-Willem van der Horst, Hans Meiling, Joerg Mallmann, Christian Wagner, Judon Stoeldraijer, Geert Fisser, Jo Finders, Carmen Zoldesi, Uwe Stamm, Herman Boom, David Brandt, Daniel Brown, Igor Fomenkov, Michael Purvis
Publicado en: Extreme Ultraviolet (EUV) Lithography VII, 2016, Página(s) 97760A
Editor: SPIE
DOI: 10.1117/12.2220423

NXE pellicle: offering a EUV pellicle solution to the industry

Autores: Derk Brouns, Aage Bendiksen, Par Broman, Eric Casimiri, Paul Colsters, Peter Delmastro, Dennis de Graaf, Paul Janssen, Mark van de Kerkhof, Ronald Kramer, Matthias Kruizinga, Henk Kuntzel, Frits van der Meulen, David Ockwell, Maria Peter, Daniel Smith, Beatrijs Verbrugge, David van de Weg, Jim Wiley, Noelie Wojewoda, Carmen Zoldesi, Pieter van Zwol
Publicado en: Extreme Ultraviolet (EUV) Lithography VII, 2016, Página(s) 97761Y
Editor: SPIE
DOI: 10.1117/12.2221909

The future of EUV lithography: enabling Moore's Law in the next decade

Autores: Alberto Pirati, Jan van Schoot, Kars Troost, Rob van Ballegoij, Peter Krabbendam, Judon Stoeldraijer, Erik Loopstra, Jos Benschop, Jo Finders, Hans Meiling, Eelco van Setten, Niclas Mika, Jeannot Dredonx, Uwe Stamm, Bernhard Kneer, Bernd Thuering, Winfried Kaiser, Tilmann Heil, Sascha Migura
Publicado en: Extreme Ultraviolet (EUV) Lithography VIII, 2017, Página(s) 101430G
Editor: SPIE
DOI: 10.1117/12.2261079

The future of EUV lithography: continuing Moore's Law into the next decade

Autores: Jan van Schoot, Kars Troost, Frank Bornebroek, Rob van Ballegoij, Sjoerd Lok, Peter Krabbendam, Judon Stoeldraijer, Jos Benschop, Jo Finders, Hans Meiling, Eelco van Setten, Bernhard Kneer, Peter Kuerz, Winfried Kaiser, Tilmann Heil, Sascha Migura
Publicado en: Extreme Ultraviolet (EUV) Lithography IX, 2018, Página(s) 23, ISBN 9781-510616592
Editor: SPIE
DOI: 10.1117/12.2295800

Contrast optimization for 0.33NA EUV lithography

Autores: Jo Finders, Sander Wuister, Thorsten Last, Gijsbert Rispens, Eleni Psari, Jan Lubkoll, Eelco van Setten, Friso Wittebrood
Publicado en: Extreme Ultraviolet (EUV) Lithography VII, 2016, Página(s) 97761P
Editor: SPIE
DOI: 10.1117/12.2220036

EUV High-NA scanner and mask optimization for sub 8 nm resolution

Autores: Jan van Schoot, Koen van Ingen Schenau, Gerardo Bottiglieri, Kars Troost, John Zimmerman, Sascha Migura, Bernhard Kneer, Jens Timo Neumann, Winfried Kaiser
Publicado en: Photomask Technology 2015, 2015, Página(s) 963503
Editor: SPIE
DOI: 10.1117/12.2202258

First light at EBL2

Autores: Norbert Koster, Edwin te Sligte, Freek Molkenboer, Alex Deutz, Peter van der Walle, Pim Muilwijk, Wouter Mulckhuyse, Bastiaan Oostdijck, Christiaan Hollemans, Björn Nijland, Peter Kerkhof, Michel van Putten, Jeroen Westerhout
Publicado en: Extreme Ultraviolet (EUV) Lithography VIII, 2017, Página(s) 101431N
Editor: SPIE
DOI: 10.1117/12.2257997

EUV mask lifetime testing using EBL2

Autores: Chien-Ching Wu, Maurice P.M. A. Limpens, Jacqueline van Veldhoven, Herman Bekman, Alex Deutz, Edwin te Sligte, Arnold J. Storm, Michel van Putten
Publicado en: Extreme Ultraviolet (EUV) Lithography IX, 2018, Página(s) 33, ISBN 9781-510616592
Editor: SPIE
DOI: 10.1117/12.2297369

Ultra Clean sample transportation in an EUV exposure system

Autores: F.T. Molkenboer, N.B. Koster, A.F. Deutz, B.A.H. Nijland, P.J. Kerkhof, P.M. Muilwijk, B.W. Oostdijck, J. Westerhout, C.L. Hollemans, W.F.W. Mulckhuyse, M. van Putten, P. van der Walle, A.M. Hoogstrate, J.R.H. Diesveld, A. Abutan
Publicado en: AVS Proceedings, Edición 64, 2017, Página(s) VT-WeM3
Editor: AVS

EBL2: realization and qualification of an EUV exposure system

Autores: Michel van Putten, N.B. Koster, A.F. Deutz, B.A.H. Nijland, P.J. Kerkhof, P.M. Muilwijk, B.W. Oostdijck, J. Westerhout, C.L. Hollemans, E. te Sligte, W.F.W. Mulckhuyse, F.T. Molkenboer, A.M. Hoogstrate, P. van der Walle, J.R.H. Diesveld, A. Abutan
Publicado en: AVS Proceedings, Edición 64, 2017, Página(s) VT-TuM11
Editor: AVS

Characterization of EBL2 EUV exposure facility

Autores: Edwin te Sligte, Michel van Putten, Freek T. Molkenboer, Peter van der Walle, Pim M. Muilwijk, Norbert B. Koster, Jeroen Westerhout, Peter J. Kerkhof, Bastiaan W. Oostdijck, Alex F. Deutz, Wouter Mulckhuyse
Publicado en: International Conference on Extreme Ultraviolet Lithography 2017, 2017, Página(s) 78, ISBN 9781-510613751
Editor: SPIE
DOI: 10.1117/12.2280356

First light and results on EBL2

Autores: Norbert Koster, Edwin te Sligte, Alex Deutz, Freek Molkenboer, Pim Muilwijk, Peter van der Walle, Wouter Mulckhuyse, Bjorn Nijland, Peter Kerkhof, Michel van Putten
Publicado en: Photomask Japan 2017: XXIV Symposium on Photomask and Next-Generation Lithography Mask Technology, 2017, Página(s) 104540O
Editor: SPIE
DOI: 10.1117/12.2279025

Latest developments on EUV reticle and pellicle research and technology at TNO

Autores: Rogier Verberk, Norbert Koster, Wilbert Staring, Edwin te Sligte
Publicado en: 33rd European Mask and Lithography Conference, 2017, Página(s) 10, ISBN 9781-510613577
Editor: SPIE
DOI: 10.1117/12.2279672

Optimized phase-shifting masks for high-resolution resist patterning by interference lithography

Autores: Sascha Brose, Serhiy Danylyuk, Lukas Bahrenberg, Peter Loosen, Larissa Juschkin, Rainer Lebert
Publicado en: International Conference on Extreme Ultraviolet Lithography 2017, 2017, Página(s) 81, ISBN 9781-510613751
Editor: SPIE
DOI: 10.1117/12.2280582

Analysis of distinct scattering of extreme ultraviolet phase and amplitude multilayer defects with an actinic dark-field microscope

Autores: Lukas Bahrenberg, Stefan Herbert, Jenny Tempeler, Aleksey Maryasov, Oskar Hofmann, Serhiy Danylyuk, Rainer Lebert, Peter Loosen, Larissa Juschkin
Publicado en: Extreme Ultraviolet (EUV) Lithography VI, 2015, Página(s) 942229
Editor: SPIE
DOI: 10.1117/12.2085929

Vertically stacked gate-all-around Si nanowire transistors: key process optimizations and ring oscillator demonstration

Autores: Mertens, H.; Ritzenthaler, R.; Pena, V.; Santoro, G.; Kenis, K.; Schulze, A.; Dentoni Litta, E.; Chew, S.; Devriendt, K.; Chiarella, T.; Demuynck, S.; Yakimets, D.; Jang, D.; Spessot, A.; Eneman, G.; Dangol, A.; Lagrain, P.; Bender, H.; Sun, S.; Korolik, M.; Kioussis, D.; Kim, M.; Bu, K.; Chen, S.; Cogorno, M.; Devrajan, J.; Machillot, J.; Yoshida, N.; Kim, N.; Barla, K.; Mocuta, D. and Horiguchi,
Publicado en: 2017
Editor: IEEE International Electron Devices Meeting - IEDM

Attenuated PSM for EUV: Can they mitigate 3D mask effects?

Autores: Andreas Erdmann, Peter Evanschitzky, Vicky Philipsen, Markus Bauer, Eric Hendrickx, Hazem Mesilhy
Publicado en: Extreme Ultraviolet (EUV) Lithography IX, 2018, Página(s) 35, ISBN 9781-510616592
Editor: SPIE
DOI: 10.1117/12.2299648

Efficient simulation of EUV pellicles

Autores: Peter Evanschitzky, A. Erdmann
Publicado en: International Conference on Extreme Ultraviolet Lithography 2017, 2017, Página(s) 11, ISBN 9781-510613751
Editor: SPIE
DOI: 10.1117/12.2280535

Polarization resolved measurements with the new EUV ellipsometer of PTB

Autores: Victor Soltwisch, Andreas Fischer, Christian Laubis, Christian Stadelhoff, Frank Scholze, Albrecht Ullrich
Publicado en: Extreme Ultraviolet (EUV) Lithography VI, 2015, Página(s) 942213
Editor: SPIE
DOI: 10.1117/12.2085798

Characterization of optical material parameters for EUV Lithography applications at PTB

Autores: Christian Laubis, Anton Haase, Victor Soltwisch, Frank Scholze
Publicado en: 31st European Mask and Lithography Conference, 2015, Página(s) 96610W
Editor: SPIE
DOI: 10.1117/12.2195009

Innovative scatterometry approach for self-aligned quadruple patterning (SAQP) process control

Autores: Anil Gunay Demirkol, Efrain Altamirano-Sánchez, IMEC (Belgium); Stephane Heraud, Nova Measuring Instruments GmbH (Germany); Stephane Godny, Anne-Laure Charley, Philippe Leray, IMEC (Belgium); Ronen Urenski, Oded Cohen, Igor Turovets, Shay Wolfling, Nova Measuring Instruments Ltd. (Israel)
Publicado en: SPIE Advanced Lithography 2016, Edición 2016, 2016, Página(s) 60,61
Editor: SPIE

Realization of an in-situ Mueller-matrix imaging ellipsometer for the real time observation of surface properties in an ultra-high vacuum EUV facility

Autores: P. Muilwijk
Publicado en: AVS Proceedings, Edición 63, 2016, Página(s) "Paper #4224"
Editor: AVS

EBL2, a flexible, controlled EUV exposure and surface analysis facility

Autores: Edwin te Sligte, Norbert Koster, Freek Molkenboer, Alex Deutz
Publicado en: Photomask Japan 2016: XXIII Symposium on Photomask and Next-Generation Lithography Mask Technology, 2016, Página(s) 99840R
Editor: SPIE
DOI: 10.1117/12.2240302

EBL2: high power EUV exposure facility

Autores: Edwin te Sligte, Norbert Koster, Freek Molkenboer, Peter van der Walle, Pim Muilwijk, Wouter Mulckhuyse, Bastiaan Oostdijck, Christiaan Hollemans, Björn Nijland, Peter Kerkhof, Michel van Putten, André Hoogstrate, Alex Deutz
Publicado en: Photomask Technology 2016, 2016, Página(s) 998520
Editor: SPIE
DOI: 10.1117/12.2240921

Realisation of a vacuum system of an EUV exposure system Presentation

Autores: F. Molkenboer
Publicado en: AVS Proceedings, Edición 63, 2016, Página(s) "Paper #3725"
Editor: AVS

A million wafer, virtual fabrication approach to determine process capability requirements for an industry-standard 5nm BEOL two-level metal flow

Autores: W. F. Clark, A. Juncker, E. Paladugu, D. Fried, C. J. Wilson, G. Pourtois, M. Gallagher, A. De Jamblinne, D. Piumi, J. Boemmels, Z. S. Tokei, D. Mocuta
Publicado en: 2016 International Conference on Simulation of Semiconductor Processes and Devices (SISPAD), 2016, Página(s) 43-46, ISBN 978-1-5090-0818-6
Editor: IEEE
DOI: 10.1109/SISPAD.2016.7605144

Modeling of Tone Inversion Process Flow for N5 Interconnect to Characterize Block Tip to Tip

Autores: S. Guissi, W. F. Clark, A. Junker, J. Ervin, K. Greiner, D. Fried, B. Briggs, K. Devriendt, F. Sebaai, A. Charley, C. J. Wilson, J. Boemmels, Z. Tőkei
Publicado en: INTERNATIONAL INTERCONNECT TECHNOLOGY CONFERENCE, Edición 2017, 2017
Editor: IEEE

Introducing the EUV CNT pellicle

Autores: Jae Uk Lee, Johannes Vanpaemel, Ivan Pollentier, Christoph Adelmann, Houman Zahedmanesh, Cedric Huyghebaert, Marina Timmermans, Michael De Volder, Emily Gallagher
Publicado en: Photomask Technology 2016, Edición 99850C (25 October 2016), 2016, Página(s) 99850C
Editor: SPIE
DOI: 10.1117/12.2243019

Novel membrane solutions for the EUV pellicle: better or not?

Autores: Ivan Pollentier, Jae Uk Lee, Marina Timmermans, Christoph Adelmann, Houman Zahedmanesh, Cedric Huyghebaert, Emily E. Gallagher
Publicado en: Extreme Ultraviolet (EUV) Lithography VIII, Edición 01430L (24 March 2017), 2017, Página(s) 101430L
Editor: SPIE
DOI: 10.1117/12.2257891

Reducing EUV mask 3D effects by alternative metal absorbers

Autores: Vicky Philipsen, Kim Vu Luong, Laurent Souriau, Eric Hendrickx, Andreas Erdmann, Dongbo Xu, Peter Evanschitzky, Robbert W. E. van de Kruijs, Arash Edrisi, Frank Scholze, Christian Laubis, Mathias Irmscher, Sandra Naasz, Christian Reuter
Publicado en: Extreme Ultraviolet (EUV) Lithography VIII, 2017, Página(s) 1014310
Editor: SPIE
DOI: 10.1117/12.2257929

Mitigating EUV mask 3D effects by alternative metal absorbers

Autores: Philipsen, V.; Luong, V.; Hendrickx, E.; Erdmann, A.; Dongbo, X.; Evanschitzky, P.; van de Kruijs, R.; Edrisi, A.; Scholze, F.; Laubis, C.; Irmscher, M. and Naasz, S.
Publicado en: 2016
Editor: International Symposium on Extreme Ultraviolet Lithography

Optimized EUV mask absorber stack for improved imaging by reducing roughness and crystallinity of alternative absorber materials

Autores: Luong, V.; Philipsen, V.; Hendrickx, E.; Scholze, F.; van de Kruijs, R.; Edrisi, A.; Wood, O. and Heyns, M.
Publicado en: 2016
Editor: International Symposium on Extreme Ultraviolet Lithography

RMG nMOS 1<sup>st</sup> process enabling 10x lower gate resistivity in N7 bulk FinFETs

Autores: L.-A. Ragnarsson, H. Dekkers, T. Schram, S. A. Chew, B. Parvais, M. Dehan, K. Devriendt, Z. Tao, F. Sebaai, C. Baerts, S. Van Elshocht, N. Yoshida, A. Phatak, C. Lazik, A. Brand, W. Clark, D. Fried, D. Mocuta, K. Barla, N. Horiguchi, A. V.-Y. Thean
Publicado en: 2015 Symposium on VLSI Technology (VLSI Technology), 2015, Página(s) T148-T149, ISBN 978-4-86348-501-3
Editor: IEEE
DOI: 10.1109/VLSIT.2015.7223656

Layout optimization and trade-off between 193i and EUV-based patterning for SRAM cells to improve performance and process variability at 7nm technology node

Autores: Sushil Sakhare, Darko Trivkovic, Tom Mountsier, Min-Soo Kim, Dan Mocuta, Julien Ryckaert, Abdelkarim Mercha, Diederik Verkest, Aaron Thean, Mircea Dusa
Publicado en: Design-Process-Technology Co-optimization for Manufacturability IX, 2015, Página(s) 94270O
Editor: SPIE
DOI: 10.1117/12.2086100

Self-aligned-quadruple-patterning for N7/N5 silicon fins

Autores: Efrain Altamirano-Sánchez, Tao S. Zheng, Anil Gunay Demirkol, Gian F. Lorusso, Toby Hopf, Jean-Christophe Everat IMEC (Belgium), William Clark, Coventor (France); Daniel Sobieski, Fung-Suong Ou, Lam Research Corp. (United States); David Hellin, Lam Research (Belgium)
Publicado en: SPIE Advanced Lithigraphy 2016, 2016
Editor: SPIE

Predicting LER and LWR in SAQP with 3D virtual fabrication

Autores: Jiangjiang (Jimmy) Gu, Dalong Zhao, Vasanth Allampalli, Daniel Faken, Ken Greiner, David M. Fried
Publicado en: Advanced Etch Technology for Nanopatterning V, 2016, Página(s) 97820N
Editor: SPIE
DOI: 10.1117/12.2218929

EBL2: EUV exposure and surface analysis system

Autores: E. te Sligte
Publicado en: EUVL Symposium, Edición 2015, 2015
Editor: EUVL Symposium

Sub 20nm particle inspection on EUV mask blanks

Autores: P. Bussink
Publicado en: SPIE Advanced Lithography Proceedings, Edición 2016, 2016, Página(s) 9778-115
Editor: SPIE

Parallel, high throughput atomic force metrology for EUV masks and wafers

Autores: H. Sadeghian
Publicado en: SPIE Advanced Lithography Proceedings, Edición 2016, 2016
Editor: SPIE

EBL2, a flexible and controlled EUV exposure and surface analysis system

Autores: E. te Sligte
Publicado en: PTB Workshop, Edición 2015, 2015
Editor: PTB Workshop

Vacuum Architecture of an EUV exposure system

Autores: F. Molkenboer
Publicado en: AVS Proceedings, Edición 62, 2015, Página(s) Paper VT-WeM11
Editor: AVS-62

EUV lithography imaging using novel pellicle membranes

Autores: Ivan Pollentier, Johannes Vanpaemel, Jae Uk Lee, Christoph Adelmann, Houman Zahedmanesh, Cedric Huyghebaert, Emily E. Gallagher
Publicado en: Extreme Ultraviolet (EUV) Lithography VII, 2016, Página(s) 977620
Editor: SPIE
DOI: 10.1117/12.2220031

Properties and performance of EUVL pellicle membranes

Autores: Emily E. Gallagher, Johannes Vanpaemel, Ivan Pollentier, Houman Zahedmanesh, Christoph Adelmann, Cedric Huyghebaert, Rik Jonckheere, Jae Uk Lee
Publicado en: Photomask Technology 2015, 2015, Página(s) 96350X
Editor: SPIE
DOI: 10.1117/12.2199076

Update on EUV radiometry at PTB

Autores: Christian Laubis, Annett Barboutis, Christian Buchholz, Andreas Fischer, Anton Haase, Florian Knorr, Heiko Mentzel, Jana Puls, Anja Schönstedt, Michael Sintschuk, Victor Soltwisch, Christian Stadelhoff, Frank Scholze
Publicado en: Extreme Ultraviolet (EUV) Lithography VII, 2016, Página(s) 977627
Editor: SPIE
DOI: 10.1117/12.2218902

Characterization of Mo/Si mirror interface roughness for different Mo layer thickness using resonant diffuse EUV scattering

Autores: Anton Haase, Victor Soltwisch, Frank Scholze, Stefan Braun
Publicado en: Optical Systems Design 2015: Optical Fabrication, Testing, and Metrology V, 2015, Página(s) 962804
Editor: SPIE
DOI: 10.1117/12.2191265

Realisation of a vacuum system for EUV beam line EBL2

Autores: Freek Molkenboer, Norbert Koster, Alfred Abutan, Alex Deutz, Hans Diesveld, Christiaan Hollemans, Andre Hoogstrate, Peter Kerkhof, Pim Muilwijk, Wouter Mulckhuyse, Bjorn Nijland, Bastiaan Oostdijck, Michel van Putten, Edwin te Sligte, Peter van der Walle, Jeroen Westerhout
Publicado en: NEVAC Blad, Edición 55 (3), 2017, Página(s) p 18-23, ISSN 0169-9431
Editor: NEVAC

Derechos de propiedad intelectual

"""AIMER"" word mark"

Número de solicitud/publicación: DE 30 2017 113 021.3
Fecha: 2017-12-18
Solicitante(s): RI RESEARCH INSTRUMENTS GMBH

Si/B membranes for emissive pellicles

Número de solicitud/publicación: WO 2017102379 A1
Fecha: 2016-12-02

Semiconductor device fabrication using etch stop layer

Número de solicitud/publicación: US 20170213732 A1
Fecha: 2017-07-27
Solicitante(s): ASM BELGIUM NV

Process for forming silicon-filled openings with a reduced occurrence of voids

Número de solicitud/publicación: US 20160141176 A1
Fecha: 2016-05-19
Solicitante(s): ASM BELGIUM NV

Engineering strategies for early pellicle failure warning and detection before failure occurs

Número de solicitud/publicación: WO 2017102380 A1
Fecha: 2016-12-02

Solutions for direct cooling of mirror in projection optics box to reduce optical surface deformations

Número de solicitud/publicación: WO 2017153152 A1
Fecha: 2017-02-17

Method and apparatus for filling a gap

Número de solicitud/publicación: US 15222738
Fecha: 2016-07-28
Solicitante(s): ASM BELGIUM NV

Removeable pellicle mount with reduced footprint

Número de solicitud/publicación: WO 2017102378 A1
Fecha: 2016-12-02

Process for densifying nitride film

Número de solicitud/publicación: US 20160079058 A1
Fecha: 2016-03-17
Solicitante(s): ASM BELGIUM NV

SiO2 mitigation

Número de solicitud/publicación: WO 2016055330 A1
Fecha: 2015-09-30

Process for forming silicon-filled openings with a reduced occurrence of voids

Número de solicitud/publicación: US 20160141176 A1
Fecha: 2016-05-19
Solicitante(s): ASM EUROPE BV

Oxygen conducting oxide and oxidation barrier pellicle architecture

Número de solicitud/publicación: WO 2017186486 A1
Fecha: 2017-04-12

Alternative membrane manufacturing processes

Número de solicitud/publicación: WO 2017102383
Fecha: 2016-12-02

A method to measure plasma image position in lithography machine

Número de solicitud/publicación: WO 2017125254 A1
Fecha: 2017-01-02

Alternative pellicle manufacturing process using waferbonding

Número de solicitud/publicación: WO 2017076686
Fecha: 2016-10-25

SiO2 mitigation

Número de solicitud/publicación: WO 2016055330 A1
Fecha: 2015-09-30
Solicitante(s): CARL ZEISS SMT GMBH

Method and apparatus for filling a gap

Número de solicitud/publicación: US 20180033606 A1
Fecha: 2018-02-01
Solicitante(s): ASM BELGIUM NV

Buscando datos de OpenAIRE...

Publicaciones

Derechos de propiedad intelectual

Compartir esta página

Descargar