Rezultaty
Data about on-going ZEB-district projects are collected and analyzed with respect to FFG façade application in comparison to both DEMO sites foreseen in InDeWaG.
Midterm reportThe mid term report will summarize the most important results, the use of resources, potential risks and the measures to overcome them.
First generation of site-ZEB building simulation with performance data of existing Water Flow GlazingAn open source software is selected and existing performance data of WFG are used to analyze the influence of WFG for a particular site-ZEB building
InDeWaG tool to design water ow glazing envelopesThe InDeWaG tool will cover: (i) a thermal pre-design based on energy balance, (ii) spectral characterization for a preselected glazing and (iii) thermal simulation of a simplified building in different orientations and locations.
Components of the water ow glazing module: glazing, circulator and frameThis report will include a complete technical description of the developed components, as well as the main conclusions based on the aging tests.
Demonstrators for Fluid Flow Glazing façade systems: Constructive Solutions and Energy PerformancesThis deliverable intended to give a sophisticated report over the construction and the performance of the three proposed demonstrators in Spain and in Bulgaria.
Report on geometrical variants of glazing and fluid composition concepts for the FFG facadeBased on the existing FFG elements different variants of size and thickness of glazing elements are analyzed by simulation. Also, different fluids (fluid properties, temperature range, solar absorption properties) are implemented in order to improve mass and energy transport.
Timing of project meetings, kick-off in SpainThe InDeWaG consortium will have 6 monthly project meetings among them (upon request from the PO) two review meetings. The meeting schedule is as follows: a kick-off in Germany (Frankfurt or Bayreuth), the 6 month meeting in Spain (Cuanca or Madrid), the 12 month meeting in Brussels (review?), 18 month meeting in Bulgaria (Sofia),24 Month meeting in Brussels (review?), 30 M meeting in Spain, 36 M in Germany and a final meeting (M 42) either in Brussels or in Bulgaria.
Final report WP9The final report is due after M 52.
Case study for Bulgarian- and Spain-Demo-sites, different variants of façadeWith the help of the existing simulation tool (developed by Intelliglas, now SVC) specific cases are calculated for both Demo sites
Testing of maintenance procedures establishedReports on experience with the maintenance procedures are made available to the consortium in a general description (public dissemination).
Demonstrator Manual readyDetailed descriptions for operation and maintenance of both the demonstrators in Spain and in Bulgaria.
Recommendation of glazing/coatings, polymers and frame materials selection according to LCA (to WP 4,5, 6)Based on preliminary LCA results the footprint reduction potential for all materials needed to build FFG facades should be analyzed.
Templates for Deliverable reporting, introduction to financial reportingA template in accordance with the reporting formats for Deliverables will be designed and distributed to all partners. A detailed instruction for financial reporting will be provided to each participant.
Materials for FFG performance and environmental footprint improvementThe materials selected for all components of FFG facades are validated with respect to LCA and LCC; alternative materials are suggested with improved LCA/LCC.
Report on comparison of simulated and measured performance of FFG in different HVAC situations.ance of FFGReal data from the existing Demo-building in Spain and the new façade in Bulgaria are analyzed to validate the simulation tool developed so far.
Interim report on performance figures of DemonstratorsPerformance figure of both Demo sites are analyzed and communicated to the consortium.
IDA ICE manual of FFG module for simulation engineersThe simulation tool and FFG façade handbook are made available to architects and project developers. Their feedback is analyzed, improvement strategies are suggested.
First version of FFG façade HandbookThe draft version of the FFG façade handbook is presented and tested by the operators of the Demo buildings.
Guidelines for the integration of FFG into HVAG and lighting systemsA technical report on strategies to integrate FFG with existing and newly designed HVAC systems is presented, for different types of buildings in different climate situations.
Recommendations for microfluidic improvement for WFG and AFGHardware, e.g. microstructured glasing, internal guiding structures, etc. are analyzed along with control means for fluid flow.
Report about the market analysis, the Life-Cycle Assessment and the Total Cost of Ownership calculationThe market analysis results for FFG facades in different climate zones, specified HVAC conditions and certain (selected) district level solutions is presented. This report is crucial for further development of the business plan.
Guidelines for improvement of fluid transport to widen the application range of FFGto large dimensions (>3x1.3m²)As major contribution to the simulation tool improved fluid transport strategies are presented for large glazing elements.
Templates for reportingThe consortium members will be given a template for the reports submitted to EU Commission according to the actual templates for such reports.
Final conferenceThe R&D achievements of InDeWaG and the demonstrator experience will be presented and discussed with potential stakeholders in a specialized conference.
Assessment on demonstrator construction and operationAdvanced report of Demonstrator performance is provided, including S&W analysis.
Comparison of performance data measured at the Demo-sites with detailed simulation and review of control strategiesThe real performance figures of the Demo buildings are reviewed and compared with predictions obtained by the simulation tools developed so far. Control strategies are analyzed for their potential to imptove real life performance of the FFG buildings.
First version of energy management system definedFor cold and hot climate conditions and three different types of buildings specific energy management systems are defined, depending upon size of FFG with respect to total façade area.
Selection of software and data base for LCAAvailable data base and softwares are analysed with respect to their suitability to FFG façade materials and production technology requirements to establish an optimized methodology for LCA.
Production and Assembly Manual for Fluid Flow GlazingThis report will contain all information from this work package regarding the production of spacers, frames, and glazing as well as the assembly of Fluid Flow Glazing systems.
Preliminary single site ZEB market analysis in Spain, Bulgaria, GermanyAn actualized market analysis for single site ZEB has to be performed based on publicly available data and with particular emphasis on new technologies.
Fluid dynamical simulation for fluid flow glazing façades and smart buildingsThe fluid performance based optimization potential of FFG, including geometrical and control strategies is summarized for different building types, HVAC systems, and climate situations.
Case studies for commercial, public and residential buildings with WFG façade and different variants of district infrastructureAll partners involved in simulation collect and jointly analyze their case studies for different buildings containing WFG facades along with different variants of district infrastructure to meet ZEB requirements for cold and hot climate.
The performance of the software tool which will be made available for early planning stage of FFG-containing ZEB is tested for full building simulation and case studies for cold and hot climate in three different types of buildings.
Implementation of Radiant Interior Walls (RIW) into single room simulationBased on results of Deliverable 1.4 & 1.5. a refined simulation is performed for RIW implementation into different single room cases (hot and cold climate, different size and orientation of buildings) in order to estimate the importance of RIW for cost efficient ZEB performance.
Implementation of new experimental performance data of Fluid Flow Glazing (WFG, AFG, RIW)Based on results of Deliverable 1.4-1.6 refined case studies are performed using real performance data.
Implementation of BIPV into building simulationPartner ISC analyses by simulation several case studies for ZEB containing BIPV together with significant contribution of WFG facades and RIW (simplified model) to the overall energy consumption figures.
Implementation of relevant climatic situations and weather conditionsFor all relevant climate variants – cold and hot, different building size and orientation – a data base is agreed on and the methodology for implementation into the different simulation tools is defined
A publishable dissemination plan is presented. It will be a living document.
Digital newsletter No. 2An update electronic newsletter will be prepared and disseminated via different internet portals.
Project Leaflet & Roll-up Version 1A leaflet and roll up for public dissemination activities will be prepared.
Project Leaflet & Roll-up updated versionThe leaflet and roll up for public dissemination activities will be updated according to the project achievements.
Project websiteA project website with a public and a remote area will be installed.
Digital newsletter No. 1An electronic newsletter will be prepared and disseminated via different internet portals.
Press Release (kick-off)Basic information about the inDeWaG concept and project goals will be communicated
Digital newsletter No. 3An update electronic newsletter will be prepared and disseminated via different internet portals.
Publikacje
Autorzy:
M Nikolaeva-Dimitrova, M Stoyanova, Pl Ivanov, K Tchonkova, R Stoykov
Opublikowane w:
Bulg. Chem. Commun, 2018, Strona(/y) 21-27, ISSN 0324-1130
Wydawca:
Chemicals Institutes of the Bulgarian Academy of Sciences and of the Union of Chemists in Bulgaria
Autorzy:
Belen Moreno Santamaria, Fernando del Ama Gonzalo, Benito Lauret Aguirregabiria, Juan A. Hernandez Ramos
Opublikowane w:
Sustainability, Numer 12/18, 2020, Strona(/y) 7596, ISSN 2071-1050
Wydawca:
MDPI Open Access Publishing
DOI:
10.3390/su12187596
Autorzy:
Fernando del Ama Gonzalo, Juan A. Hernandez Ramos, Belen Moreno
Opublikowane w:
IOP Conference Series: Materials Science and Engineering, Numer 245, 2017, Strona(/y) 042011, ISSN 1757-8981
Wydawca:
IOP Conference Series: Materials Science and Engineering
DOI:
10.1088/1757-899X/245/4/042011
Autorzy:
Belen Moreno, Juan A. Hernández
Opublikowane w:
Building and Environment, Numer 140, 2018, Strona(/y) 162-172, ISSN 0360-1323
Wydawca:
Pergamon Press Ltd.
DOI:
10.1016/j.buildenv.2018.05.037
Autorzy:
Fernando Del Ama Gonzalo, Belen Moreno and Juan A. Hernandez
Opublikowane w:
International Journal of Applied Engineering Research, Numer Volume 13, Number 11, 2018, Strona(/y) 9188-9193, ISSN 0973-4562
Wydawca:
Research India Publications
Autorzy:
Luis J. Claros-Marfil, J. Francisco Padial, Benito Lauret
Opublikowane w:
Renewable Energy, Numer 92, 2016, Strona(/y) 450-461, ISSN 0960-1481
Wydawca:
Pergamon Press Ltd.
DOI:
10.1016/j.renene.2016.02.037
Autorzy:
Pablo Sierra, Juan A. Hernández
Opublikowane w:
Energy and Buildings, Numer 139, 2017, Strona(/y) 133-145, ISSN 0378-7788
Wydawca:
Elsevier BV
DOI:
10.1016/j.enbuild.2017.01.032
Autorzy:
Xabier Romero, Juan A. Hernández
Opublikowane w:
Energy and Buildings, Numer 145, 2017, Strona(/y) 67-78, ISSN 0378-7788
Wydawca:
Elsevier BV
DOI:
10.1016/j.enbuild.2017.03.013
Autorzy:
Belen Moreno Santamaria, Fernando del Ama Gonzalo, Benito Lauret Aguirregabiria, Juan A. Hernandez Ramos
Opublikowane w:
Sustainability, Numer 12/14, 2020, Strona(/y) 5734, ISSN 2071-1050
Wydawca:
MDPI Open Access Publishing
DOI:
10.3390/su12145734
Autorzy:
Belen Moreno Santamaria, Fernando del Ama Gonzalo, Danielle Pinette, Benito Lauret Aguirregabiria, Juan A. Hernandez Ramos
Opublikowane w:
Sustainability, Numer 12/18, 2020, Strona(/y) 7564, ISSN 2071-1050
Wydawca:
MDPI Open Access Publishing
DOI:
10.3390/su12187564
Autorzy:
Daniel Pfanner, Teodora Vatashka, Astrid Münzinger, Ümit Esiyok, Daniel Leykam
Opublikowane w:
ce/papers, Numer 2/1, 2018, Strona(/y) 199-210, ISSN 2509-7075
Wydawca:
Wiley
DOI:
10.1002/cepa.642
Autorzy:
Fernando Del Ama Gonzalo, Belen Moreno and Juan A. Hernandez
Opublikowane w:
International Journal of Social Ecology and Sustainable Development, 2018, ISSN 1947-8402
Wydawca:
IGI Global Publishing
Autorzy:
Daniel Pfanner, Teodora Vatashka, Ümit Esiyok, Daniel Leykam
Opublikowane w:
ce/papers, Numer 2/5-6, 2018, Strona(/y) 135-147, ISSN 2509-7075
Wydawca:
Wiley
DOI:
10.1002/cepa.917
Autorzy:
Belen Moreno, Fernando Del Ama Gonzalo, Juan A. Hernandez
Opublikowane w:
International Journal of Embedded Systems, Numer 1/1, 2017, Strona(/y) 1, ISSN 1741-1068
Wydawca:
Inderscience Enterprises
DOI:
10.1504/IJES.2017.10009297
Autorzy:
Fernando del Ama Gonzalo, Juan A. Hernandez, Belen Moreno
Opublikowane w:
2016 5th International Conference on Electronic Devices, Systems and Applications (ICEDSA), 2016, Strona(/y) 1-4, ISBN 978-1-5090-5306-3
Wydawca:
IEEE
DOI:
10.1109/ICEDSA.2016.7818532
Wyszukiwanie danych OpenAIRE...
Podczas wyszukiwania danych OpenAIRE wystąpił błąd
Brak wyników