Skip to main content
European Commission logo
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS

SaTEllyte synthetic Aperture radar interferometry to model Dam stabilitY

Cel

Analyses of surface deformation can help to define the evolution of areas, structures and infrastructures menaced by hazardous phenomena. To this end, space-borne Synthetic Aperture Radar (SAR) data provides direct measures of surface movements. Specific techniques to handle SAR data have been recently applied to monitor not only natural hazardous phenomena, such as earthquakes, subsidence and landslides, but even structural health of buildings and infrastructure. The large spread of these techniques is supported by the non-invasiveness of radar signals, the possibility to cover vast areas and the availability of a large database of data acquired since the ‘90s, despite they do not give any indication about the triggering factors and the strain source or the tensile condition of a structure. STEADY Project (SaTEllyte synthetic Aperture radar interferometry to model Dam stability) is aimed to use SAR data to monitor dam structural health and, even more, to apply an innovative approach, exploiting deformation fields as a starting point to re-create a simplified analytical model, providing preliminary hints about the stress-strain status of the dam in a short time if compared with traditional finite element models. The relevance of this process emerges when environmental or logistic conditions do not allow to monitor dams through traditional geodetic and numerical techniques. In such cases, results obtained from SAR data combined with an analytical model constitute a reliable diagnostic tool of dam structural health to avoid any extraordinary failure that may lead to loss of lives. The method will be tested on an emblematic real case, the Mosul dam, facing the following goals: (i) analysis of satellite SAR data available over the area, (ii) identification of an analytical model to reproduce dam deformation behaviour and tensile condition, (iii) implementation of a semi-automatic tool to perform numerical simulations, applicable to further cases.

Koordynator

SARMAP SA
Wkład UE netto
€ 175 419,60
Adres
CASCINE DI BARICO 10
6989 Purasca
Szwajcaria

Zobacz na mapie

MŚP

Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.

Tak
Region
Schweiz/Suisse/Svizzera Ticino Ticino
Rodzaj działalności
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Linki
Koszt całkowity
€ 175 419,60