FRICTION OPTIMISATION OF SEALS THROUGH ADVANCED LASER SURFACE TEXTURING OF MOULDS

Leistungen

Review and compilation of the technical standards and standardisation requirements relevant to the project activities and objectives.

Techno-economic assessment, LCA and Standards development

Report containing i) the final techno-economic analysis, including an economic modelling to provide cost and performance boundaries and reduce unnecessary costs and investment risk; ii) Life Cycle Analysis, to assess the environmental aspects and potential impacts associated with MouldTex; and iii) Development of the technical standards that will help maximize compatibility, interoperability, safety, repeatability and quality of the MouldTex technology.

Fully operational 5-axis laser meeting target KPIs

Demonstration of fully operational laser system able to engrave the designated nanotexture on the mould, equipped with adaptive optics and the module software Raptor Laser Cam for the design and the parameterization of nanotextures.

Pilot line demonstration events

A series of events will be organised to demonstrate the pilot line capabilities to interested end-users, including seal manufacturers and mould tool manufacturers, facilitating the access to a broad network of European end-users, and including the demonstration of training materials, tools and services.

Project Website

First version of the project website, which will be updated continuously during the course of the project.

Veröffentlichungen

Omnidirectional iridescence via cylindrically-polarized femtosecond laser processing

Autoren: Nikolaos Livakas, Evangelos Skoulas, Emmanuel Stratakis
Veröffentlicht in: Opto-Electronic Advances, Ausgabe 3/5, 2020, Seite(n) 190035-190035, ISSN 2096-4579
Herausgeber: Opto-Electronic Advances
DOI: 10.29026/oea.2020.190035

A Digital Twin for Friction Prediction in Dynamic Rubber Applications with Surface Textures

Autoren: Valentina Zambrano, Markus Brase, Belén Hernández-Gascón, Matthias Wangenheim, Leticia A. Gracia, Ismael Viejo, Salvador Izquierdo, José Ramón Valdés
Veröffentlicht in: Lubricants, Ausgabe 9/5, 2021, Seite(n) 57, ISSN 2075-4442
Herausgeber: MDPI, Lubricants
DOI: 10.3390/lubricants9050057

Numerical Approach for the Assessment of Micro-Textured Walls Effects on Rubber Injection Moulding

Autoren: María García-Camprubí, Carmen Alfaro-Isac, Belén Hernández-Gascón, José Ramón Valdés, Salvador Izquierdo
Veröffentlicht in: Polymers, Ausgabe 13/11, 2021, Seite(n) 1739, ISSN 2073-4360
Herausgeber: MDPI, Polymers
DOI: 10.3390/polym13111739

Surface structuring of rutile TiO 2 (100) and (001) single crystals with femtosecond pulsed laser irradiation

Autoren: Luc Museur, George D. Tsibidis, Alexandra Manousaki, Demetrios Anglos, Andrei Kanaev
Veröffentlicht in: Journal of the Optical Society of America B, Ausgabe 35/10, 2018, Seite(n) 2600, ISSN 0740-3224
Herausgeber: Optical Society of America
DOI: 10.1364/josab.35.002600

Modelling of the ultrafast dynamics and surface plasmon properties of silicon upon irradiation with mid-IR femtosecond laser pulses

Autoren: E. Petrakakis, G. D. Tsibidis, E. Stratakis
Veröffentlicht in: Physical Review B, Ausgabe 99/19, 2019, ISSN 2469-9950
Herausgeber: American Physical Society, Journal: Physical Review B
DOI: 10.1103/physrevb.99.195201

The Role of Crystalline Orientation in the Formation of Surface Patterns on Solids Irradiated with Femtosecond Laser Double Pulses

Autoren: George D. Tsibidis, Luc Museur, Andrei Kanaev
Veröffentlicht in: Applied Sciences, Ausgabe 10/24, 2020, Seite(n) 8811, ISSN 2076-3417
Herausgeber: MDPI, Applied Science
DOI: 10.3390/app10248811

Predictive modeling approaches in laser-based material processing

Autoren: Maria-Christina Velli, George D. Tsibidis, Alexandros Mimidis, Evangelos Skoulas, Yannis Pantazis, Emmanuel Stratakis
Veröffentlicht in: Journal of Applied Physics, Ausgabe 128/18, 2020, Seite(n) 183102, ISSN 0021-8979
Herausgeber: American Institute of Physics
DOI: 10.1063/5.0018235

Laser-induced multi-functional biomimetic surfaces

Autoren: Museur L., Tsibidis G.D. Manousaki A., Anglos D., and Kanaev A
Veröffentlicht in: 2019 Conference on Lasers and Electro-Optics Europe Conference, Ausgabe Yearly, 2019
Herausgeber: 2019 Conference on Lasers and Electro-Optics Europe Conference

Leistungen

Veröffentlichungen

Diese Seite teilen

Herunterladen