FRICTION OPTIMISATION OF SEALS THROUGH ADVANCED LASER SURFACE TEXTURING OF MOULDS

Rezultaty

Review and compilation of the technical standards and standardisation requirements relevant to the project activities and objectives.

Techno-economic assessment, LCA and Standards development

Report containing i) the final techno-economic analysis, including an economic modelling to provide cost and performance boundaries and reduce unnecessary costs and investment risk; ii) Life Cycle Analysis, to assess the environmental aspects and potential impacts associated with MouldTex; and iii) Development of the technical standards that will help maximize compatibility, interoperability, safety, repeatability and quality of the MouldTex technology.

Fully operational 5-axis laser meeting target KPIs

Demonstration of fully operational laser system able to engrave the designated nanotexture on the mould, equipped with adaptive optics and the module software Raptor Laser Cam for the design and the parameterization of nanotextures.

Pilot line demonstration events

A series of events will be organised to demonstrate the pilot line capabilities to interested end-users, including seal manufacturers and mould tool manufacturers, facilitating the access to a broad network of European end-users, and including the demonstration of training materials, tools and services.

Project Website

First version of the project website, which will be updated continuously during the course of the project.

Publikacje

Omnidirectional iridescence via cylindrically-polarized femtosecond laser processing

Autorzy: Nikolaos Livakas, Evangelos Skoulas, Emmanuel Stratakis
Opublikowane w: Opto-Electronic Advances, Numer 3/5, 2020, Strona(/y) 190035-190035, ISSN 2096-4579
Wydawca: Opto-Electronic Advances
DOI: 10.29026/oea.2020.190035

A Digital Twin for Friction Prediction in Dynamic Rubber Applications with Surface Textures

Autorzy: Valentina Zambrano, Markus Brase, Belén Hernández-Gascón, Matthias Wangenheim, Leticia A. Gracia, Ismael Viejo, Salvador Izquierdo, José Ramón Valdés
Opublikowane w: Lubricants, Numer 9/5, 2021, Strona(/y) 57, ISSN 2075-4442
Wydawca: MDPI, Lubricants
DOI: 10.3390/lubricants9050057

Numerical Approach for the Assessment of Micro-Textured Walls Effects on Rubber Injection Moulding

Autorzy: María García-Camprubí, Carmen Alfaro-Isac, Belén Hernández-Gascón, José Ramón Valdés, Salvador Izquierdo
Opublikowane w: Polymers, Numer 13/11, 2021, Strona(/y) 1739, ISSN 2073-4360
Wydawca: MDPI, Polymers
DOI: 10.3390/polym13111739

Surface structuring of rutile TiO 2 (100) and (001) single crystals with femtosecond pulsed laser irradiation

Autorzy: Luc Museur, George D. Tsibidis, Alexandra Manousaki, Demetrios Anglos, Andrei Kanaev
Opublikowane w: Journal of the Optical Society of America B, Numer 35/10, 2018, Strona(/y) 2600, ISSN 0740-3224
Wydawca: Optical Society of America
DOI: 10.1364/josab.35.002600

Modelling of the ultrafast dynamics and surface plasmon properties of silicon upon irradiation with mid-IR femtosecond laser pulses

Autorzy: E. Petrakakis, G. D. Tsibidis, E. Stratakis
Opublikowane w: Physical Review B, Numer 99/19, 2019, ISSN 2469-9950
Wydawca: American Physical Society, Journal: Physical Review B
DOI: 10.1103/physrevb.99.195201

The Role of Crystalline Orientation in the Formation of Surface Patterns on Solids Irradiated with Femtosecond Laser Double Pulses

Autorzy: George D. Tsibidis, Luc Museur, Andrei Kanaev
Opublikowane w: Applied Sciences, Numer 10/24, 2020, Strona(/y) 8811, ISSN 2076-3417
Wydawca: MDPI, Applied Science
DOI: 10.3390/app10248811

Predictive modeling approaches in laser-based material processing

Autorzy: Maria-Christina Velli, George D. Tsibidis, Alexandros Mimidis, Evangelos Skoulas, Yannis Pantazis, Emmanuel Stratakis
Opublikowane w: Journal of Applied Physics, Numer 128/18, 2020, Strona(/y) 183102, ISSN 0021-8979
Wydawca: American Institute of Physics
DOI: 10.1063/5.0018235

Laser-induced multi-functional biomimetic surfaces

Autorzy: Museur L., Tsibidis G.D. Manousaki A., Anglos D., and Kanaev A
Opublikowane w: 2019 Conference on Lasers and Electro-Optics Europe Conference, Numer Yearly, 2019
Wydawca: 2019 Conference on Lasers and Electro-Optics Europe Conference

Rezultaty

Publikacje

Udostępnij tę stronę

Pobierz