Skip to main content
European Commission logo
español español
CORDIS - Resultados de investigaciones de la UE
CORDIS

Creating the next generation of 3D simulation means for icing

Descripción del proyecto

Nueva generación de herramientas para el diseño de hielo tridimensional para condiciones de nieve y líquidas

Las futuras arquitecturas de sistemas de propulsión y vehículos aéreos implican nuevas metodologías para caracterizar la acumulación de hielo y sus efectos. Además, los cambios en reglamentos de certificación, particularmente para grandes gotas superenfriadas, requerirán que los fabricantes certifiquen sus productos ante normas más estrictas. La nieve sigue suponiendo un reto para los motores de turbina y los grupos electrógenos auxiliares. El proyecto ICE GENESIS, financiado con fondos europeos, tiene como objetivo ofrecer a la industria aeronáutica europea una nueva generación validada de herramientas para el diseño de hielo tridimensional (simulación numérica y capacidades de túnel de viento con congelación para predecir la acumulación de hielo), tal como se indica en el Apéndice C, Apéndice O y las condiciones de nieve en la circular de asesoramiento de la Administración Federal de Aviación para el diseño rentable, eficiente y seguro, así como para la certificación de futuros giroaviones y aeronaves.

Objetivo

Current design methodologies used to characterise ice accretion and its effects on air vehicle
components and power plant systems are mainly based on empirical methods, comparative analysis,
2D simulation tools and past experience gained on in-service products. Due to the associated
uncertainties, cautious design margins are used, leading to conservative and non-optimised solutions.
As future air vehicle and propulsive system architectures introduce radical design changes, it will
no longer be possible to rely on the existing design methodologies, making future development
extremely difficult to accomplish efficiently and within short development cycles that are demanded
by customers and desired by industry. These difficulties are increased by the recent changes
in certification regulations, in particular for Supercooled Large Droplets (SLD), which require
manufacturers to certify their products against more stringent requirements. Snow also remains
a challenge, especially for turbine engines and APUs. ICE GENESIS will provide the European
aeronautical industry with a validated new generation of 3D icing engineering tools (numerical
simulation tools and upgraded test capabilities), addressing App C, O and snow conditions, for safe,
efficient, right first time, and cost effective design and certification of future regional, business and
large aircraft, rotorcraft and engines. ICE GENESIS will permit weather hazards to be more precisely
evaluated and properly mitigated thanks to adapted design or optimised protection through either
active or passive means. Furthermore, ICE GENESIS will pave the way for 3D digital tools to be used
in the future as acceptable means of compliance by the regulation authorities. Overall, ICE GENESIS
will contribute to flight safety, reduced certification costs and increased operability.

Convocatoria de propuestas

H2020-MG-2018-2019-2020

Consulte otros proyectos de esta convocatoria

Convocatoria de subcontratación

H2020-MG-2018-SingleStage-INEA

Régimen de financiación

RIA - Research and Innovation action

Coordinador

AIRBUS OPERATIONS SAS
Aportación neta de la UEn
€ 1 075 016,50
Dirección
ROUTE DE BAYONNE 316
31060 Toulouse
Francia

Ver en el mapa

Región
Occitanie Midi-Pyrénées Haute-Garonne
Tipo de actividad
Private for-profit entities (excluding Higher or Secondary Education Establishments)
Enlaces
Coste total
€ 1 112 516,50

Participantes (38)