Description du projet
Une méthode rentable pour la sécurité du transport aérien
Les retards des vols entraînent des pertes considérables pour le secteur du transport aérien. Le problème étant principalement dû à une faible visibilité, de meilleurs systèmes de visibilité en vol sont progressivement installés dans les avions civils pour aider les pilotes à atterrir dans toutes les conditions de visibilité. Le projet 3DGUIDE, financé par l’UE, réunira un groupe interdisciplinaire d’experts de classe mondiale dans le domaine des fréquences radio et des antennes afin de présenter une méthode de production rentable d’antennes à guide d’ondes millimétriques de haute précision avec une fabrication additive. Il s’agit d’un procédé prometteur pour la production d’antennes aux formes 3D complexes qui réduit les procédures d’assemblage et les coûts de production généraux.
Objectif
Flight delays are costing billions of Euros yearly to the air transportation industry yearly. A large part of delays being linked to low visibility, Enhanced Flight Vision Systems are slowly coming to civil aircrafts and will eventually support pilots to land in any visibility condition. The Systems ITD of Clean Sky 2 aims to accelerate the development of new functions in cockpit systems for flight optimization in all conditions, increased crew awareness and efficiency. These new solution must however remain competitive in an industry under increasing cost pressure.
To address these challenges, the 3DGUIDE project intends to demonstrate an affordable production method for high precision mm-wave waveguide antennas with Additive manufacturing (AM). AM is a promising candidate to produce antennas with complex 3D shapes, reduce assembly steps and decrease overall production costs. The selected process, Laser Powder bed fusion (L-PBF), a metal AM technology, is optimized by CSEM for high printing resolutions and will be benchmarked against traditional manufacturing processes through the manufacturing, testing and performances comparison of printed mm-wave slotted antenna array elements (e.g. WG, single slotted WG array). An inductive iris waveguide bandpass filter operating at 94 GHz is suggested as 3D printed phase shifter and dummy MEMS will be integrated into the phase shifter element structure for the project. Furthermore, a later integration of MEMS biasing lines printed in the WG structure will be tested. The project will target a TRL4.
To reach these objectives, 3DGUIDE brings together an interdisciplinary team of experts including world-class researchers on radiofrequency and antennas (UPM), an industry expert in development and deployment of high frequency antennas in challenging environments (TTI), and finally an industry oriented research and technology organization well versed in leading and managing interdisciplinary international projects (CSEM).
Champ scientifique
- engineering and technologyelectrical engineering, electronic engineering, information engineeringinformation engineeringtelecommunicationsradio technologyradio frequency
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraft
- social sciencessocial geographytransport
- engineering and technologymechanical engineeringmanufacturing engineeringadditive manufacturing
- natural sciencesphysical sciencesopticslaser physics
Programme(s)
Régime de financement
IA - Innovation actionCoordinateur
2000 Neuchatel
Suisse