Feasibility demonstration of 3D printing for a new efficient production method of mm-wave waveGUIDE antenna

Projektinformationen

3DGUIDE

ID Finanzhilfevereinbarung: 886696

DOI 10.3030/886696

Projekt abgeschlossen

EK-Unterschriftsdatum 22 April 2020

Startdatum 1 September 2020

Enddatum 31 August 2022

Finanziert unter

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Gesamtkosten € 594 950,00

EU-Beitrag € 530 975,00

Koordiniert durch

CSEM CENTRE SUISSE D'ELECTRONIQUE ET DE MICROTECHNIQUE SA - RECHERCHE ET DEVELOPPEMENT
Switzerland

Leistungen

Documents, reports (3)

Plan for the Communication and Dissemination of Results

Description of the project communication and dissemination strategy, including identification of all dissemination channels and definition of goals and performance indicators to follow the progress towards them. The document summarises the beneficiaries’ strategy and concrete actions related to the communication, dissemination, and protection of the project results. This document is a living document and will be updated/confirmed as part of the Periodic and Final Reporting of the project, meaning at each periodic time.

Communication and Dissemination Report

Final report on communication and dissemination of the 3DGUIDE project

Demonstrator hardware

Complete 3D printed antenna array It includes antenna array elements feeding network with one common input waveguide port

Open Research Data Pilot (1)

Data Management Plan (DMP)

The DMP describes the data management life cycle for the data (i.e. underlying data needed to validate results presented in scientific publications) to be collected, processed and/or generated by the project. The DMP is a living document and will be updated/confirmed as part of the Periodic and Final Reporting of the project, meaning at each periodic time.

Veröffentlichungen

Conference proceedings (4)

A cost-effective production method for high-precision mm-wave waveguide antennas and components

Autoren: A. Vorobyov, S.Unterhofer, O. Sereda
Veröffentlicht in: UkRMW 2022, 2022
Herausgeber: UkRMW, IEEE

Manufacturing and testing of a 94GHz linear slot array designed by the MoM-FMP techniquie

Autoren: I. Montesinos-Ortego, M. García-Peña, B. Galocha-Iragüen, M. Sierra-Castañer
Veröffentlicht in: EuCAP 2022, 2022, Seite(n) 4
Herausgeber: EuCAP, IEEEE
DOI: 10.23919/eucap53622.2022.9769077

A new efficient production method of mmwave components used in enhanced flight vision system

Autoren: A.Vorobyov, S. Unterhofer, I. Montesinos, M. Dadras, M. Sierra, F. Kroll, O. Sereda
Veröffentlicht in: TSAS 2022, 2022
Herausgeber: TSAS 2022

Additive manufacturing of smart waveguide: comparison between three alloys, Bronze, Al-Si and Scalmalloy

Autoren: UNTERHOFER Samuel; VOROBYOV Oleksandr; SEREDA Olha
Veröffentlicht in: EUROMAT 2021, 2021
Herausgeber: EUROMAT 2021
DOI: 10.5281/zenodo.6371404

Other (1)

Metallic Additive Manufacturing Technologies for 3D Shaped Millimeter Wave Components Production

Autoren: A. Vorobyov, S. Unterhofer, M. Dadras, O. Sereda
Veröffentlicht in: 2022, Seite(n) 1
Herausgeber: CSEM