Feasibility demonstration of 3D printing for a new efficient production method of mm-wave waveGUIDE antenna

Informazioni relative al progetto

3DGUIDE

ID dell’accordo di sovvenzione: 886696

DOI

10.3030/886696

Progetto chiuso

Data della firma CE 22 Aprile 2020

Data di avvio 1 Settembre 2020

Data di completamento 31 Agosto 2022

Finanziato da

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Costo totale

€ 594 950,00

Contributo UE

€ 530 975,00

Coordinato da

CSEM CENTRE SUISSE D'ELECTRONIQUE ET DE MICROTECHNIQUE SA - RECHERCHE ET DEVELOPPEMENT
Switzerland

CORDIS fornisce collegamenti ai risultati finali pubblici e alle pubblicazioni dei progetti ORIZZONTE.

I link ai risultati e alle pubblicazioni dei progetti del 7° PQ, così come i link ad alcuni tipi di risultati specifici come dataset e software, sono recuperati dinamicamente da .OpenAIRE .

Risultati finali

Documents, reports (3)

Plan for the Communication and Dissemination of Results

Description of the project communication and dissemination strategy, including identification of all dissemination channels and definition of goals and performance indicators to follow the progress towards them. The document summarises the beneficiaries’ strategy and concrete actions related to the communication, dissemination, and protection of the project results. This document is a living document and will be updated/confirmed as part of the Periodic and Final Reporting of the project, meaning at each periodic time.

Communication and Dissemination Report

Final report on communication and dissemination of the 3DGUIDE project

Demonstrator hardware

Complete 3D printed antenna array It includes antenna array elements feeding network with one common input waveguide port

Open Research Data Pilot (1)

Data Management Plan (DMP)

The DMP describes the data management life cycle for the data (i.e. underlying data needed to validate results presented in scientific publications) to be collected, processed and/or generated by the project. The DMP is a living document and will be updated/confirmed as part of the Periodic and Final Reporting of the project, meaning at each periodic time.

Pubblicazioni

Conference proceedings (4)

A cost-effective production method for high-precision mm-wave waveguide antennas and components

Autori: A. Vorobyov, S.Unterhofer, O. Sereda
Pubblicato in: UkRMW 2022, 2022
Editore: UkRMW, IEEE

Manufacturing and testing of a 94GHz linear slot array designed by the MoM-FMP techniquie

Autori: I. Montesinos-Ortego, M. García-Peña, B. Galocha-Iragüen, M. Sierra-Castañer
Pubblicato in: EuCAP 2022, 2022, Pagina/e 4
Editore: EuCAP, IEEEE
DOI: 10.23919/eucap53622.2022.9769077

A new efficient production method of mmwave components used in enhanced flight vision system

Autori: A.Vorobyov, S. Unterhofer, I. Montesinos, M. Dadras, M. Sierra, F. Kroll, O. Sereda
Pubblicato in: TSAS 2022, 2022
Editore: TSAS 2022

Additive manufacturing of smart waveguide: comparison between three alloys, Bronze, Al-Si and Scalmalloy

Autori: UNTERHOFER Samuel; VOROBYOV Oleksandr; SEREDA Olha
Pubblicato in: EUROMAT 2021, 2021
Editore: EUROMAT 2021
DOI: 10.5281/zenodo.6371404

Other (1)

Metallic Additive Manufacturing Technologies for 3D Shaped Millimeter Wave Components Production

Autori: A. Vorobyov, S. Unterhofer, M. Dadras, O. Sereda
Pubblicato in: 2022, Pagina/e 1
Editore: CSEM