Obiettivo
To maintain the competitiveness of supplier and end-user industries of components made from rubber, greater knowledge of processing, design and service environment factors on functional life is needed. To solve this problem the objectives are:
(a) identify and quantify key factors in processing, design and service environment that control the functional life of rubber components, and
(b) develop computer simulation models that can be used to rapidly predict the performance of improved processes or designs.
The objectives will be achieved by:
(1) investigation of mixing and moulding factors on functional life,
(2) modelling components behaviour in service,
(3) development of materials tests and performances models,
(4) validation of computer simulation models with component test and end-user trials.
The expected results are:
(i) validated predictive models that simulate component performance in automotive break systems,
(ii) know-how and predictive models to optimise processing and design, assess alternative materials, define accelerated test conditions, reduce prototype testing, reduce development time, and improve reliability.
Laboratory test methods and procedures:
For materials evaluation, test methods and procedures were developed for hyperelastic, viscoelastic and fatigue properties for elastomers accounting for thermal and other service related effects. Rheological test procedures were developed for uncured material. A test to quantify the strength of weak rubber-rubber interfaces and assess factors affecting weak interfaces was developed. A gas decompression test was developed to diagnose the presence of weak interfaces in manufactured components. For component evaluation an accelerated durability test was developed for brake booster diaphragms.
Material models:
Material models and associated parameters were derived for the rheological, hyperelatic, viscoelastic and fatigue properties of the elastomers of interest.Processing factors and functional lifeThe influence of processing on functional life was assess in terms of weak interfaces, orientation and state of mix. Key factors and the influence of these were identified. For weak interfaces, flow, pressure and tack were identified. A method for quantifying orientation was developed which can be used with mould filling software to predict orientation and in addition mould shrinkage. Under some circumstances orientation may be exploited to enhance strength and fatigue resistance. Fatigue life was found not to be very sensitive to the state of mix, but significant benefits might be gained from high states of mix.
Service factors and functional life:
Thermal effects in particular were considered and the relative importance of various temperature extremes determined.
Simulation of moulding processes:
Model components were simulated using commercial software and were used to develop and validate procedures developed for simulation of the moulding processes. Key material and equipment parameters were identified from sensitivity studies and procedures developed to overcome limitations of current commercial software to account for rubber behaviour. The effects of component and mould design changes on process conditions and material requirements were assessed using the procedures developed.
Simulation of functional response:
A simulation of the functional response of brake booster diaphragms was developed using commercial software. The model was validated against measurements made in the durability test.Critical regions and conditions were identified. The simulation enabled the effects of design changes on functional performance were assessed.
Life Prediction:
From material models and simulations, failure conditions in brake booster diaphragm components were predicted. Both energetics and strain were identified -life approaches were used and thermal effects were accounted for. The critical conditions for the diaphragm.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.
- scienze naturali informatica e scienze dell'informazione software
- scienze naturali matematica matematica applicata modello matematico
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
SG13 7DG HERTFORD
Regno Unito
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.