Obiettivo
The project aims at a fundamental improvement of treatment of people with diabetes.
The development will concentrate on 3 major components in order to simulate a healthy pancreas in a closed loop mode:
An insulin in furor where parameters are continuously adapted;
.A continuous glycaemia measuring device;
.A model of the human physiology in order to compute the infusion rate as a function of glycaemia and time.
The project shall deliver all medical and technical aspects needed in order to proceed toward an industrial application within the 3 to 5 years following the completion of the project. Therefore it will focus on improvements of glucose sensor technologies, modelling of glucose metabolism and system development to approach the functionality of an artificial pancreas.
Objectives:
The goal of the project is the set-up and test of a controlled personal insulin dosing system that makes use of the latest bio-sensor technology, advanced software simulation tools and new micro-dosing tools to greatly improve the personal medication of persons suffering from diabetes.
One objective is to measure over a long period continuously and reliably the glucose level to improve substantially treatment of insulin dependent diabetes. Better adjustment of insulin dosage reduces significantly diabetes-related complications like eye, kidney and nerve damage.
Additionally, automated data recording will produce much better data that will be used by research institutions for better models and improved statistical evaluations of diabetes and diabetes treatment. Statistical evaluation and actual glycaemia values will also be visible to the patients allowing them for the first time continuous feedback and monitoring of the trends of their health conditions in time.
Work description:
The project shall deliver all medical, technical and market aspects needed in order to proceed toward an industrial application within the 3 to 5 years following the completion of the project.
Preparatory phase:
.check the feasibility of the above architecture and recognise possible "roadblocks";
.assess the basic requirements for system design;
.real needs of the diabetics;
.needs of the diabetes-care personnel;
.expectations for the device's man-machine interface (MMI);
.expectation for the body interface;
.clarification of the medical indications.
Industrial research in order to obtain a continuous and automated measurement of glycaemia, including calibration, tests and data conversion facilities.
Create a physiological model or an advisory system, which allows determining the parameters settings of an insulin pump. Since both the glucose sensor and the physiological model are of primary importance for the project and bear very the high risk of development, two groups shall work in parallel on each area.
Create a first set of prototype of a workable device, which shall in addition contain an insulin pump, an MMI allowing the patient to control its device, and the necessary links for a monitoring by a medical doctor or a nurse. A number of testing and the gathering of experimental data shall be performed in order to assess a system with real chances to be developed to a commercial product.
Tests shall be basically done in two steps:
"in vitro" by modelling and measuring in a laboratory;
."in-vivo", whenever all foreseeable system errors have been eliminated and when the proof is made, that any potential danger of injury to the test person has been eliminated.
Finally the project shall look forward to the way the results may be used to proceed to the development of products, and to fulfil the following goals:
.to increase the quality of the patient's life;
.to decrease the overall costs due to the treatment of diabetes.
Therefore a strategy for industrialisation and a strategy for market introduction shall be elaborated within the project.
Milestones:
The project shall deliver all medical and technical aspects needed in order to proceed toward an industrial application within the 3 to 5 years following the completion of the project.
Therefore it will focus on improvements of glucose sensor technologies, modelling of glucose metabolism and system development to approach the functionality of an artificial pancreas.
Important milestones will be the decisions on the sensors and models finally used in the complete system.
Campo scientifico (EuroSciVoc)
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: https://op.europa.eu/it/web/eu-vocabularies/euroscivoc.
CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: https://op.europa.eu/it/web/eu-vocabularies/euroscivoc.
- scienze mediche e della salute medicina di base farmacologia e farmacia farmaci
- scienze mediche e della salute medicina clinica endocrinologia diabete
- scienze mediche e della salute biotecnologia medica ingegneria dei tessuti pancreas artificiale
- scienze mediche e della salute medicina di base fisiologia
- scienze naturali informatica e scienze dell'informazione software software applicativi software di simulazione
È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione
Siamo spiacenti… si è verificato un errore inatteso durante l’esecuzione.
È necessario essere autenticati. La sessione potrebbe essere scaduta.
Grazie per il tuo feedback. Riceverai presto un'e-mail di conferma dell'invio. Se hai scelto di ricevere una notifica sullo stato della segnalazione, sarai contattato anche quando lo stato della segnalazione cambierà.
Programma(i)
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Programmi di finanziamento pluriennali che definiscono le priorità dell’UE in materia di ricerca e innovazione.
Argomento(i)
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.
Invito a presentare proposte
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Dati non disponibili
Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.
Meccanismo di finanziamento
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.
Coordinatore
80686 MUENCHEN
Germania
I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.