Making Europe a circular and climate-neutral society requires responsible utilisation of residues and wastes, as well as large volumes of sustainable fuels for transport sectors like aviation and shipping. The CIRCULAIR project addresses these challenges by developing an advanced biomass conversion pathway for cost-effective fuel production from abundant agricultural residues through hydrothermal liquefaction (HTL). HTL can convert a wide range of organic feedstocks into fuels and is in particular suitable for wet feedstock.
CIRCULAIR has set four high-level project objectives: (i) to develop and demonstrate a cost-effective pathway to biofuel production from abundant feedstock, (ii) to produce a high share of on-specification jet fuel from HTL biocrudes, (iii) nearly-complete biomass utilisation by coupling with green hydrogen and (iv) to enable negative contributions to the GHG balance of HTL fuel production.
Manure and straw are widely available as agricultural residues. Feedstock costs can be low, especially in areas with regional manure surplus. The challenge of handling HTL process water is addressed by integrating HTL conversion with wet oxidation (WO) of the process water. Thereby, the process water is cleaned-up and thermal integration with exothermic WO reduces the process heat demand of HTL. CIRCULAIR plans to demonstrate autothermal operation of an integrated HTL-WO pilot plant.
The biocrudes that result from HTL conversion can be upgraded to liquid hydrocarbon fuels. Specific challenges for the upgrading towards jet fuel specifications include the residual nitrogen content (CIRCULAIR’s target: < 10 ppm) and the aromaticity of the product as well as the valorisation of distillation residues. CIRCULAIR develops solutions for processing HTL biocrudes through pre-treatment and continuous hydrotreatment. The aim is to obtain a high share of on-specification jet fuel through hydrocracking and targeted hydrofinishing.
The carbon content of the feed biomass is transferred to several product phases. CIRCULAIR develops suitable technologies to derive products from all HTL product phases. HTL conversion yields a biocrude as main product. HTL process water also contains a large fraction of the initial carbon content. Volatile fatty acids are recovered from the process water after WO. Furthermore, CIRCULAIR develops recovery and purification strategies for CO2 streams from HTL conversion and WO. Purified CO2 is combined with green hydrogen for methanol synthesis. Methanol can be used as marine fuel or as a renewable commodity chemical. Finally, a solid phase is evolved. CIRCULAIR investigates the use of HTL chars for soil application and carbon sequestration. The target is to transfer >95% of the initial carbon content to various products.
The CIRCULAIR concept minimizes major emission drivers of HTL conversion: Integration of WO minimizes external process energy demand and the utilisation of green hydrogen minimizes emissions associated with biocrude upgrading. CIRCULAIR investigates opportunities to generate negative contributions to the GHG balance, potentially enabling carbon-negative fuel production. In particular, the long-term carbon sequestration potential of HTL solids is quantified. Further negative contributions may be attributed to avoided burdens in comparison with current manure handling practices.