Boosting SUstaiNability, Reliability and EfficiencY of perovskite PV through novel materials and process engineering.

Informacje na temat projektu

SUNREY

Identyfikator umowy o grant: 101084422

DOI

10.3030/101084422

Projekt został zamknięty

Data podpisania przez KE 24 Października 2022

Data rozpoczęcia 1 Listopada 2022

Data zakończenia 31 Stycznia 2026

Finansowanie w ramach

• Climate, Energy and Mobility

Koszt całkowity

€ 4 249 978,25

Wkład UE

€ 4 249 978,00

Koordynowany przez

FRAUNHOFER GESELLSCHAFT ZUR FORDERUNG DER ANGEWANDTEN FORSCHUNG EV
Germany

CORDIS oferuje możliwość skorzystania z odnośników do publicznie dostępnych publikacji i rezultatów projektów realizowanych w ramach programów ramowych HORYZONT.

Odnośniki do rezultatów i publikacji związanych z poszczególnymi projektami 7PR, a także odnośniki do niektórych konkretnych kategorii wyników, takich jak zbiory danych i oprogramowanie, są dynamicznie pobierane z systemu OpenAIRE .

Rezultaty

Documents, reports (11)

Report on dissemination and communication activities

Dissimination and exploitation activities throughout the project phase is reported. This also includes staticts on social media presence, statistics on visits of the website, number of publications and contributions to conferences or fairs and IP generation

Comparative Toxicity Analysis

A Circular Economy Analysis is preformed against the 30 CRM (Critical Raw materials) provided by the JRC in 2020 and applied to upstream process as modelled with Life Cycle Assessment. This includes a comparative toxitity analysis of different PV technologies.

Life cycle Assessment, circularity analysis

Lifecycle Assessment (LCA) is described following ISO 14040-44 and the EC/JRC PEF guidance.

Report on development of consensus test protocols and assessment of path towards standardization

Testing protocols are being compared to standardized procedures and perovskite PV specific degradation with the related test protocols are brought to standardization bodies to establish them in new standards

Scaleability and supply roadmap

The upcaling analysis includes routes to manufacture solar cells and panels for target markets including supply chain considerations, processes, costs, quality, investment requirements.

Report on measurement protocols for performance assessment of SUNREY perovskite PV technologies

Measurement protocols for the evaluation of perovskite PV, pre-conditioning, J-V characterization, MPP tacking, internal and external quantum efficiency measurements accounting for reflection losses and comparison of data from different measurements (J-V, MPP, EQE and IQE).

Report on degradation and lifetime measurement of SUNREY perovskite PV technologies

Accelerated ageing protocols (temperature, humidity; UV; thermal cycling) and protocols to assess the influence of electrical bias in the dark and of light/dark cycling, electroluminescence, photoluminescence, UV-fluorescence and IR-imaging are applied for lifetime prediction. Comparison od encapsulated and not encapsulated device are used for the determination of intrinsic and extrinisic degradation mechanisms.

Project Management Plan

Detailed Project Management Plan with Gantt Chart and Work Breakdown Structure(WBS)

Life Cycle Cost Analysis

Life Cycle cost analysis (LCC) is conducted at the material and process level alongside LCA. This is extended to include infrastructure maintenance and exploitation costs for the production of perovskite solar cells mainly in cooperation with the production partners in the project.

Report and dataset on perovskite cell degradation mechanisms

A summary is be given on known degradation mechanisms in perovskite solar cells, which will help to define design rules for the development of devices with improved stability

Final plan for dissemination and exploitation of project results

A plan for dissemination and exploitation in the post-project phase is presented

Other (2)

Degradation lifetime model

A model is described for the prediction of degradation profiles based on data of related tasks.

Model of encapsulation barrier performance

Simulation techniques are developed to model the response of SUNREY cells to applied loads to advise on their thermo-mechanical reliability, lifetime and performance.

Demonstrators, pilots, prototypes (1)

Final device samples for testing

Upscaling of the most stable device structures is provided up to 150 mm x 150 mm, results are being transferred to the industry partners GSI and Solar.

Data Management Plan (1)

Data management (DMP) and Open data use plan

Implementation and execution of data management plan, set up and management of collaboration tools for sharing of project information

Publikacje

Peer reviewed articles (16)

Bayesian Optimization of Spray Parameters for the Deposition of Ga₂O₃–Cu₂O Heterojunctions

Autorzy: Maximilian Wolf, Georg K. H. Madsen, Theodoros Dimopoulos
Opublikowane w: ACS Applied Energy Materials, Numer 8, 2025, ISSN 2574-0962
Wydawca: American Chemical Society (ACS)
DOI: 10.1021/ACSAEM.4C03284

Synergic MXene and S‐benzyl‐L‐cysteine Passivation Strategies for Wide Bandgap Perovskite Solar Cells for 4T Tandem Applications

Autorzy: Yassine Raoui, Sara Pescetelli, Antonio Agresti, Alessia Di Vito, Francesco Di Giacomo, Alessio Mezzi, Luigi Vesce, Hanna Pazniak, Elisa Nonni, Alessandro Pecchia, Valentin D. Mihailetchi, Matthias Auf der Maur, Fabio Matteocci, Aldo Di Carlo
Opublikowane w: Small, Numer 21, 2025, ISSN 1613-6810
Wydawca: Wiley
DOI: 10.1002/SMLL.202411310

Nature Communications

Autorzy: Tiefeng Liu, Johanna Heimonen, Qilun Zhang, Chi-Yuan Yang, Jun-Da Huang, Han-Yan Wu, Marc-Antoine Stoeckel, Tom P. A. van der Pol, Yuxuan Li, Sang Young Jeong, Adam Marks, Xin-Yi Wang, Yuttapoom Puttisong, Asaminew Y. Shimolo, Xianjie Liu, Silan Zhang, Qi
Opublikowane w: Nature Communications, 2023, ISSN 2041-1723
Wydawca: Nature Publishing Group
DOI: 10.1038/s41467-023-44153-7

Heterojunction Devices Fabricated from Sprayed n-Type Ga2O3, Combined with Sputtered p-Type NiO and Cu2O

Autorzy: Theodoros Dimopoulos, Rachmat Adhi Wibowo, Stefan Edinger, Maximilian Wolf, Thomas Fix
Opublikowane w: Nanomaterials, 2024, ISSN 2079-4991
Wydawca: MDPI
DOI: 10.3390/nano14030300

Empowering perovskite modules for solar and indoor lighting applications by 1,8-diiodooctane/phenethylammonium iodide 2D perovskite passivation strategy

Autorzy: Francineide Lopes de Araujo, Maurizio Stefanelli, Antonio Agresti, Sara Pescetelli, Alessia Di Vito, Matthias Auf Der Maur, Luigi Vesce, Ana Flavia Nogueira, Aldo Di Carlo
Opublikowane w: Nano Energy, Numer 142, 2025, ISSN 2211-2855
Wydawca: Elsevier BV
DOI: 10.1016/J.NANOEN.2025.111279

Pyridine-Based Multifunctional Surface Passivators Enable Efficient and Stable Perovskite Indoor Photovoltaics

Autorzy: Yi Han, Ceylan Doyranli, Alessia Di Vito, Matthias Auf der Maur, Mokurala Krishnaiah, Paavo Mäkinen, Ramesh Kumar, Basheer Al-Anesi, Debjit Manna, Paola Vivo
Opublikowane w: ACS Applied Materials & Interfaces, Numer 17, 2025, ISSN 1944-8244
Wydawca: American Chemical Society (ACS)
DOI: 10.1021/ACSAMI.5C08539

Chelating diamine surface modifier enhances performance and stability of lead halide perovskite solar cells

Autorzy: Susana Ramos-Terrón, Luis Camacho, Juan-Pablo Correa-Baena, Carlo A.R. Perini, Gustavo de Miguel
Opublikowane w: Materials Today, Numer 85, 2025, ISSN 1369-7021
Wydawca: Elsevier BV
DOI: 10.1016/J.MATTOD.2025.02.015

Journal of the American Chemical Society

Autorzy: Qifan Li Jun-Da Huang Tiefeng Liu Tom P. A. van der Pol Qilun Zhang Sang Young Jeong Marc-Antoine Stoeckel Han-Yan Wu Silan Zhang Xianjie Liu Han Young Woo Mats Fahlman Chi-Yuan Yang and Simone Fabiano
Opublikowane w: Journal of the American Chemical Society, Numer 146, 2024, ISSN 0002-7863
Wydawca: American Chemical Society
DOI: 10.1021/jacs.4c02270

A Highly Conductive <i>n</i>-Type Conjugated Polymer Synthesized in Water

Autorzy: Qifan Li, Jun-Da Huang, Tiefeng Liu, Tom P. A. van der Pol, Qilun Zhang, Sang Young Jeong, Marc-Antoine Stoeckel, Han-Yan Wu, Silan Zhang, Xianjie Liu, Han Young Woo, Mats Fahlman, Chi-Yuan Yang, Simone Fabiano
Opublikowane w: Journal of the American Chemical Society, Numer 146, 2024, ISSN 0002-7863
Wydawca: American Chemical Society (ACS)
DOI: 10.1021/JACS.4C02270

Exploring the photocatalytic performance of (CH3NH3)2AgInBr6, a Pb-free perovskite, and the composite with a MgAlTi layered double hydroxide for air purification purposes

Autorzy: José Estrada-Pomares, María de los Ángeles Oliva, Luis Sánchez, Gustavo de Miguel
Opublikowane w: Journal of Environmental Chemical Engineering, Numer 13, 2025, ISSN 2213-3437
Wydawca: Elsevier BV
DOI: 10.1016/J.JECE.2024.114934

Ground-state electron transfer in all-polymer donor:acceptor blends enables aqueous processing of water-insoluble conjugated polymers

Autorzy: Tiefeng Liu, Johanna Heimonen, Qilun Zhang, Chi-Yuan Yang, Jun-Da Huang, Han-Yan Wu, Marc-Antoine Stoeckel, Tom P. A. van der Pol, Yuxuan Li, Sang Young Jeong, Adam Marks, Xin-Yi Wang, Yuttapoom Puttisong, Asaminew Y. Shimolo, Xianjie Liu, Silan Zhang, Qifan Li, Matteo Massetti, Weimin M. Chen, Han Young Woo, Jian Pei, Iain McCulloch, Feng Gao, Mats Fahlman, Renee Kroon, Simone Fabiano
Opublikowane w: Nature Communications, Numer 14, 2023, ISSN 2041-1723
Wydawca: Springer Science and Business Media LLC
DOI: 10.1038/S41467-023-44153-7

Heterojunction Devices Fabricated from Sprayed n-Type Ga2O3, Combined with Sputtered p-Type NiO and Cu2O

Autorzy: Theodoros Dimopoulos, Rachmat Adhi Wibowo, Stefan Edinger, Maximilian Wolf, Thomas Fix
Opublikowane w: Nanomaterials, Numer 14, 2025, ISSN 2079-4991
Wydawca: MDPI AG
DOI: 10.3390/NANO14030300

Synergistic Halogen‐Bonding Passivation and Carboxylic Acid Anchoring in Carbazole‐Based Hole‐Transport Materials Enhance Performance and Stability of p–i–n Perovskite Solar Cells

Autorzy: Paavo Mäkinen, Yi Han, Giulio Koch, Mingchen Xie, Amit Tewari, Alessia Di Vito, Matthias Auf der Maur, Basheer Al‐Anesi, Akhil Alexander, Noora Lamminen, Francesca De Rossi, Francesca Brunetti, Paola Vivo
Opublikowane w: Small, Numer 21, 2025, ISSN 1613-6810
Wydawca: Wiley
DOI: 10.1002/SMLL.202502236

Critical weight percent of graphene nanoplatelets (GNPs) that optimizes water barrier and transport properties of ethylene vinyl acetate (EVA) for improved photovoltaic module packaging reliability

Autorzy: Emeka H. Amalu, Balaji B. Mahesh Babu, David J. Hughes, Michael Short, Oluwagbemiga A. Fabunmi, Gitanjali Jothiprakash, Dongyang Sun, Zhilun Lu, Senthilarasu Sundaram
Opublikowane w: Next Materials, Numer 11, 2026, ISSN 2949-8228
Wydawca: Elsevier BV
DOI: 10.1016/J.NXMATE.2026.101762

Moisture ingress evaluation of encapsulation materials using multiphysics modelling for perovskite solar cell packaging

Autorzy: Emeka H. Amalu, Oluwagbemiga A. Fabunmi, David J. Hughes, Michael Short, Eman L. Omairey
Opublikowane w: Next Materials, Numer 11, 2026, ISSN 2949-8228
Wydawca: Elsevier BV
DOI: 10.1016/J.NXMATE.2026.101694

Impact of Molecular Design and Conjugation in Diammonium A′‐Cations on the Photovoltaic Performance of Quasi‐2D Perovskite Solar Cells

Autorzy: Susana Ramos‐Terrón, Daniel Rammer, Luis Camacho, Suman Mallick, Lakshmi Rajan, Egon Pavlica, Gregor Trimmel, Thomas Rath, Gustavo de Miguel
Opublikowane w: Solar RRL, Numer 9, 2026, ISSN 2367-198X
Wydawca: Wiley
DOI: 10.1002/SOLR.202500583