Cel
Today’s design and certification procedures of aircrafts are mainly based on conservative static loading which leads to additional weight and, potentially, to a structurally unsafe aircraft. The overall objective of the DAEDALOS project is to develop methods and procedures to determine dynamical loads considering the effects of dynamic buckling, material damping and mechanical hysteresis during aircraft service.
Use of advanced analysis and design principles from DAEDALOS will partly remove the uncertainty and the conservatism of today’s design and certification procedures. DAEDALOS work will hence form the basis for improved common design practices by:
1. Determining accurate dynamic load spectra to be used for structural sizing.
2. Reducing the added weight of aircraft structural components due to conservative design in compliance with quasi-static loads by using more realistic equivalent dynamic loads. This goal will be achieved through improved introduction of the structure damping capacity and detailed analysis.
3. Increasing structural safety using more realistic loading scenarios.
4. Establishing new procedures for the definition of loads to be used during aircraft design and certification by authorities.
Dziedzina nauki
Temat(-y)
Zaproszenie do składania wniosków
FP7-AAT-2010-RTD-1
Zobacz inne projekty w ramach tego zaproszenia
System finansowania
CP-FP - Small or medium-scale focused research projectKoordynator
20133 Milano
Włochy
Zobacz na mapie
Uczestnicy (13)
Zakończenie uczestnictwa
21040 VENEGONO SUPERIORE
Zobacz na mapie
00195 Roma
Zobacz na mapie
01510 MINAMO MENOR ALAVA
Zobacz na mapie
2628 AL DELFT
Zobacz na mapie
601 90 Brno Stred
Zobacz na mapie
51147 Koln
Zobacz na mapie
164 90 Stockholm
Zobacz na mapie
70100 Lod
Zobacz na mapie
199 02 PRAHA
Zobacz na mapie
30167 Hannover
Zobacz na mapie
52062 Aachen
Zobacz na mapie
2502 BIENNE
Zobacz na mapie
32000 Haifa
Zobacz na mapie