Skip to main content
European Commission logo print header

Multiscale computational approach to the design of polymer-matrix nanocomposites

Cel

"This project aims at the development of multiscale simulation methodology and software for predicting the morphology (spatial distribution and state of aggregation of nanoparticles), thermal (glass temperature), mechanical (viscoelastic storage and loss moduli, plasticity, fracture toughness and compression strength), electrical and optical properties of soft and hard polymer matrix nanocomposites from the atomic-level characteristics of their constituent nanoparticles and macromolecules and from the processing conditions used in their preparation.

The hierarchical simulation methodology and software to be developed will be validated against two main categories of systems: silica-filled natural and synthetic rubbers and carbon nanotube filled thermoset resins. The novel ground-breaking modelling methodology should significantly improve the reliable design and processability of nanocomposites contributing to the EU Grand Challenges for reduction of CO2 emission, energy savings by light-weight high-strength nanocomposites, mobility and improved living environment. The successful outcome of the project will constitute an important advance in the state of the art and will have immediate industrial, economic and environmental impact.

The multiscale simulation methodology of EU-COMPNANOCOMP focuses on soft nanocomposites (thermoplastics) whereas the complementary RU-COMPNANOCOMP focuses on glassy nanocomposites (thermosets)(grey in proposal). RU-COMPNANOCOMP is completed with EU partners for experimental validation of the multiscale modelling codes. Both EU and RU consortia work on the development of algorithms to be integrated in a multiscale modelling software package for further commercialization.

A total of 213.5 man months completed with 26 man months from own resources is proposed with a project duration of 36 months appropriate for achieving the challenging objectives. EU-COMPNANOCOMP has a total cost of 2.3 million € with EC funding of 1.5 million € requested."

Zaproszenie do składania wniosków

FP7-NMP-2011-EU-RUSSIA
Zobacz inne projekty w ramach tego zaproszenia

Koordynator

STICHTING DUTCH POLYMER INSTITUTE
Wkład UE
€ 161 579,00
Adres
JOHN F KENNEDYLAAN 2
5600 AX EINDHOVEN
Niderlandy

Zobacz na mapie

Region
Zuid-Nederland Noord-Brabant Zuidoost-Noord-Brabant
Rodzaj działalności
Research Organisations
Kontakt administracyjny
Denka Hristova-Bogaerds (Dr.)
Linki
Koszt całkowity
Brak danych

Uczestnicy (7)