Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
Zawartość zarchiwizowana w dniu 2023-11-13

From Waste Paper to Furniture

Cel

The purpose of the From Waste Paper to Furniture-project (WPF) is to introduce storage furniture made of waste paper to the market. Using waste paper as raw material for the furniture is both innovative and environmentally friendly in comparison with existing furniture which are usually made of particle boards. The objective is to produce these new products with a quality that equals existing furniture, using a production process that reduces energy, CO2-impact and material consumption, and finally to create storage furniture that is 100% recyclable.

To be able to produce storage furniture made of waste paper a completely new machine and complete production line will be installed at SWT Paper ABs site in Varberg, Sweden. Current production plants for producing furniture of particle boards needs a space of approximately 20 000 m2. In the WPF plant, a 25 meter long machine will replace the whole process and lead to an investment cost of 1/3 in comparison to a traditional furniture production site. Using waste paper as raw material and producing recyclable furniture means that the WPF-process is efficient from a a life-cycle perspective. The WPF process is a cradle-to-cradle solution meaning that old waste paper furniture will, after been used as furniture by consumer, be able to be used as raw material for new furniture, or other waste paper products.

Expected outputs and results from WPF are;

A new recyclable product in the form of storage cube furniture made of waste paper will be available at IKEA stores throughout Europe. Estimated production will be 5 Million square meters annually and the market at the end of project is estimated to 40 Million Euro.
Another product in the storage furniture segment (yet to be decided) will be introduced to the market at the end of the project.
Annual energy consumption will be reduced with approximately 50% (600 000 kWh) compared to producing the same number of units in the current process for storage furniture.
The annual CO2-impact will decrease with 68% or close to 25 000 tons annually.
Using waste paper as raw material instead of particle board will reduce material consumption with 78% or a little more than 46 000 tons annually.

Program(-y)

Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.

Temat(-y)

Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.

Brak dostępnych danych

Zaproszenie do składania wniosków

Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.

CIP-EIP-Eco-Innovation-2011
Zobacz inne projekty w ramach tego zaproszenia

System finansowania

Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.

CIP-EIP-EI-PMRP - CIP-Eco-Innovation - Pilot and market replication projects

Koordynator

SWT PAPER AB
Wkład UE
Brak danych
Koszt całkowity

Ogół kosztów poniesionych przez organizację w związku z uczestnictwem w projekcie. Obejmuje koszty bezpośrednie i pośrednie. Kwota stanowi część całkowitego budżetu projektu.

Brak danych

Uczestnicy (1)

Moja broszura 0 0