Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
Zawartość zarchiwizowana w dniu 2024-06-18

Shape-engineered TiO2 nanoparticles for metrology of functional properties: setting design rules from material synthesis to nanostructured devices

Cel

According to European Commission [EC, COM (2012) 572, 3.10.2012] important challenges at European level are related to the establishment of validated method and instrumentation for detection, characterization and analysis of nanoparticles.
In the framework of the SETNanometro project, the use of various measurement techniques for the determination of the NPs properties will allow to move from the currently used “trial and error” approach toward the development of well defined and controlled protocols for the production of TiO2 NPs. A particular care will be devoted to the establishment of correct metrological traceability chain in order to ensure the reliability of the results.
The lack of international measurement standards for calibration is an aspect of particular relevance in nanotechnologies as it is difficult to select a universal calibration artefact to achieve repeatability at nanoscale. The materials produced according to such procedures, will be hence sufficiently characterised and homogeneous in their properties to become candidate Certified Reference Materials to be used in various applications where the lack of metrological traceability is encountered.

The project results are expected to lead to fundamental impacts on the following areas:
Environment: the increased knowledge of TiO2 NPs will improve the photocatalytic properties for the treatment of pollutants in air and water
Energy: the better knowledge of dimension and electronic structure of TiO2 will allow to improve the traceability of DSSC measurements.
Health: the engineering of topographic and surface composition of TiO2 nanostructured coatings of orthopaedic and dental prostheses will support the design of rules for the production of devices exhibiting otpimized interfacial properties for a better and quicker integration of the implants in the hosting bone tissues.

Dziedzina nauki (EuroSciVoc)

Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: https://op.europa.eu/pl/web/eu-vocabularies/euroscivoc.

Aby użyć tej funkcji, musisz się zalogować lub zarejestrować

Program(-y)

Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.

Temat(-y)

Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.

Zaproszenie do składania wniosków

Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.

FP7-NMP-2013-LARGE-7
Zobacz inne projekty w ramach tego zaproszenia

System finansowania

Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.

CP-IP - Large-scale integrating project

Koordynator

ISTITUTO NAZIONALE DI RICERCA METROLOGICA
Wkład UE
€ 537 633,00
Koszt całkowity

Ogół kosztów poniesionych przez organizację w związku z uczestnictwem w projekcie. Obejmuje koszty bezpośrednie i pośrednie. Kwota stanowi część całkowitego budżetu projektu.

Brak danych

Uczestnicy (15)

Moja broszura 0 0