Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
Zawartość zarchiwizowana w dniu 2024-06-18

Energy recovery in new and retrofitted heat pumps using a dedicated expander concept

Cel

In vapour-compression cycles (VCC) and more specifically in heat pumps, mechanical work is supplied to the compressor for increasing the pressure of the evaporated refrigerant. Heat is rejected in the condenser (effective heating at heating mode), for the condensation of the refrigerant, which is then expanded in a throttle valve (no power produced), in order to decrease its pressure, resulting to a two-phase mixture. The heat supply to the evaporator (effective cooling at cooling mode) evaporates further the refrigerant.
The aim of the EXP-HEAT project is to develop a dedicated component and to integrate it in heat pump units. This component is actually a positive displacement liquid expander with capacity of around 1-2 kW and will replace the throttle valve used in vapour-compression units. Its purpose is to recover the energy of the high-pressure liquid refrigerant, by producing power and assisting in the compression process, reducing the compression work by up to 10-15%. At the same time the heat removed is increased by around 5%, since the expansion of the liquid refrigerant is not isenthalpic. The resulting increase of the Coefficient Of Performance (COP) is expected to reach even 20% at specific operating conditions and for both heating/cooling modes, significantly improving the performance of a heat pump, without major interventions and keeping the additional cost low, in order to ensure the cost-effectiveness of this concept.
In order to achieve these targets, the developed expander will be extensively tested under a wide range of operating conditions, in order afterwards to be delivered and integrated in a re-designed heat pump with a capacity of 10-20 kW, and also used for the proper retrofitting of an already installed unit of the same capacity.

Program(-y)

Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.

Temat(-y)

Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.

Zaproszenie do składania wniosków

Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.

FP7-SME-2013
Zobacz inne projekty w ramach tego zaproszenia

System finansowania

Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.

BSG-SME - Research for SMEs

Koordynator

ETHNICON METSOVION POLYTECHNION
Wkład UE
€ 58 080,00
Adres
HEROON POLYTECHNIOU 9 ZOGRAPHOU CAMPUS
157 72 ATHINA
Grecja

Zobacz na mapie

Region
Αττική Aττική Κεντρικός Τομέας Αθηνών
Rodzaj działalności
Higher or Secondary Education Establishments
Linki
Koszt całkowity

Ogół kosztów poniesionych przez organizację w związku z uczestnictwem w projekcie. Obejmuje koszty bezpośrednie i pośrednie. Kwota stanowi część całkowitego budżetu projektu.

Brak danych

Uczestnicy (6)

Moja broszura 0 0