Toolless Manufacturing of Complex Structures

Rezultaty

Prototypes of relevant geometries and data from systematic characterization trials

Provide prototypes of relevant geometries and data from systematic characterization trials. Prepare the results that they are suitable as a demonstrator for the public.

Provide demonstrator system with 120x75x100 mm³ build volume and 15 µm resolution

Provide report on public demonstrator system.

Provide first ceramic component for medical technology made from alumina

Provide first ceramic component for medical technology made from alumina - Ceramic item for medical technology, currently aiming at endoscopy instruments, first made from alumina (in the later stages of the project silicon nitride is planned)

Provide report on industrial interest group

Within WP8 an industrial interest group, mainly recruited from potential future clients of the involved SMEs will be established.

Provide characterization of sintered ceramic and cermet parts

Report on mechanical and microstructural properties.

Environmental screening of existing processes reports

Environmental screening of existing processes reports - Identification of each input and output of each current processes - identification of each elementary flows at each production step - ILCD format

LCA of ToMax process

Life cycle assessment of ToMax process - according to ISO 14040 - 44 - definition of scope and goals - life cycle inventory building - life cycle impact assessment - interpretation of the innovative processes

Stakeholder Community database

Database that documents and clusters the targeted stakeholders in the project to receive newsletters and exploitation oriented dissemination materials (month 12 and updated at each successive periodic report

Publikacje

Kalibrierung des Arbeitsfeldes für ein 3D-Drucksystem

Autorzy: B. Busetti; J. Stampfl
Opublikowane w: Photonikseminar 2017, 2017
Wydawca: Photonikseminar 2017

Nichtmetallische Hochleistungswerkstoffe für die lithographiebasierte additive Fertigung

Autorzy: J. Kollmer; P. Dorfinger; G. Mitteramskogler; J. Stampfl
Opublikowane w: FabCon 3D 2017, 2017, Strona(/y) 10, ISBN 978-3-446-45459-0
Wydawca: FabCon 3D 2017

Design strategies for functionally graded materials

Autorzy: Adrian de Blas; Andres Diaz Lantada
Opublikowane w: Materials Science and Engineering, 2016
Wydawca: Materials Science and Engineering

Laser versus DLP

Autorzy: B. Busetti; S. Baumgartner; W. Steiger; J. Stampfl
Opublikowane w: AM Ceramics, 2017
Wydawca: AM Ceramics

Thermoplasts as Toughening Agend for 3D-printable Photopolymers

Autorzy: B. Steyrer; R. Liska; J. Stampfl
Opublikowane w: 2nd Danube Vltava Sava Polymer Meeting, 2017, ISBN 978-3-9504017-6-9
Wydawca: 2nd Danube Vltava Sava Polymer Meeting
DOI: 10.13140/RG.2.2.20822.96322

Design for additive manufacturing: overview, trends and discussion

Autorzy: Adrian De Blas
Opublikowane w: AM Ceramics, 2017
Wydawca: AM Ceramics

Toughening of Photopolymers for lithography-based Additive Manufacturing

Autorzy: Bernhard Steyrer; Christian Gorsche; Peter Dorfinger; Robert Liska; Jürgen Stampfl
Opublikowane w: Materials Science and Engineering, 2016
Wydawca: Materials Science and Engineering
DOI: 10.13140/RG.2.2.12434.35527

Surface biofunctionalization of rapid prototyped microsystems for cell culture applications

Autorzy: Andres Diaz Lantada; Ely Dannier; Valbuena Niño; Ivan Fernández Martínez; Josefa Predestinación; García Ruíz
Opublikowane w: Materials Science and Engineering, 2016
Wydawca: Materials Science and Engineering

DLP + Laser: A throughput improved lithography based Additive Manufacturing Technologies (AMT) system with hybrid exposure concept

Autorzy: B. Busetti; J. Stampfl
Opublikowane w: 12th International Symposium on Emerging and Industrial Texas Instruments DLP® Technology Applications, 2017
Wydawca: 12th International Symposium on Emerging and Industrial Texas Instruments DLP® Technology Applications

Materials development for lithography-based 3D-printing

Autorzy: Jürgen Stampfl, Peter Dorfinger1, Robert Gmeiner, and Robert Liska
Opublikowane w: Macromolecular Colloquium Freiburg, 2016
Wydawca: Institute of Macromolecular Chemistry

Lithography based Additive Manufacturing – Materials and Processes

Autorzy: Jurgen Stampfl, Johannes Homa, Robert Liska
Opublikowane w: Chinanano, 2015
Wydawca: ChinaNational Center for Nanoscience and Technology

Modeling photopolymerization processes for enhanced part quality

Autorzy: De Blas Romero, A.; Díaz Lantada, A
Opublikowane w: Industriales Research Meeting, 2016
Wydawca: Unknown

Multi-scale design and manufacturing for interacting at a cellular level

Autorzy: Díaz Lantada, A
Opublikowane w: 5th KMM-VIN Industrial Workshop: Multi-Scale and Multi-Physics Materials Modeling for Advanced Industries, 2016
Wydawca: KMM-VIN

α-Sulfonoxy acrylate chain transfer agents for 3D printing of tough photopolymers

Autorzy: G. Harakaly, K. Seidler, M. Griesser, C. Gorsche, J. Stampfl, R. Liska
Opublikowane w: RadTech Europe 2015 Conference, 2015, Strona(/y) 85
Wydawca: Radtech Europe

3D-printing of ceramics: Translation to industrial processes

Autorzy: J. Stampfl
Opublikowane w: Advances in Material & Processing Technologies, 2015, Strona(/y) 202
Wydawca: AMPT

High performance materials for lithography based additive manufacturing

Autorzy: J. Stampfl
Opublikowane w: AddIT Linz, 2015
Wydawca: Kepler University Linz

Modeling the mechanical behavior of photo-polymerized epoxy resin during additive manufacture by laser stereolithography: Influence on part quality

Autorzy: De Blas Romero, A.; Díaz Lantada, A
Opublikowane w: 5th KMM-VIN Industrial Workshop: Multi-Scale and Multi-Physics Materials Modeling for Advanced Industries, 2016
Wydawca: KMM-VIN

Multi-scale design and manufacturing strategies towards biomimetic cell culture platforms and tissue engineering scaffolds

Autorzy: Díaz Lantada, A.; De Blas Romero, A.; Schwentenwein, M.; Jelinek, C.; Homa, J
Opublikowane w: Biobone Symposium, 2015
Wydawca: BioboneITN

Monolithic 3D labs- and organs-on-chips obtained by lithography-based ceramic manufacture

Autorzy: Andrés Díaz Lantada, Adrián de Blas Romero, Martin Schwentenwein, Christopher Jellinek, Johannes Homa, Josefa Predestinación García-Ruíz
Opublikowane w: The International Journal of Advanced Manufacturing Technology, Numer 93/9-12, 2017, Strona(/y) 3371-3381, ISSN 0268-3768
Wydawca: Springer Verlag
DOI: 10.1007/s00170-017-0443-6

Visible Light Photoinitiator for 3D-Printing of Tough Methacrylate Resins

Autorzy: Bernhard Steyrer, Philipp Neubauer, Robert Liska, Jürgen Stampfl
Opublikowane w: Materials, Numer 10/12, 2017, Strona(/y) 1445, ISSN 1996-1944
Wydawca: MDPI Open Access Publishing
DOI: 10.3390/ma10121445

Design and performance assessment of innovative eco-efficient support structures for additive manufacturing by photopolymerization

Autorzy: Díaz Lantada, A.; De Blas Romero, A.; Sánchez Isasi, A., Garrido Bellido, D
Opublikowane w: Journal of Industrial Ecology, 2016, ISSN 1530-9290
Wydawca: Wiley

Lithography-based additive manufacture of ceramic biodevices with design-controlled surface topographies

Autorzy: De Blas Romero, A.; Pfaffinger, M.; Mitteramskogler, G.; Schwentenwein, M.; Jellinek, C.; Homa, J.; Díaz Lantada, A.; Stampfl, J.
Opublikowane w: International Journal of Advanced Manufacturing Technologies, 2016, Strona(/y) 1-9, ISSN 0268-3768
Wydawca: Springer Verlag
DOI: 10.1007/s00170-016-8856-1

Micro-vascular shape-memory polymer actuators with complex geometries obtained by laser stereolithography

Autorzy: Andrés Díaz Lantada, Adrián de Blas Romero, Enrique Chacón Tanarro
Opublikowane w: Smart Materials and Structures, Numer 25/6, 2016, Strona(/y) 065018, ISSN 0964-1726
Wydawca: Institute of Physics Publishing
DOI: 10.1088/0964-1726/25/6/065018

Lithography-based ceramic manufacture (LCM) of auxetic structures: present capabilities and challenges

Autorzy: Andrés Díaz Lantada, Adrián de Blas Romero, Martin Schwentenwein, Christopher Jellinek, Johannes Homa
Opublikowane w: Smart Materials and Structures, Numer 25/5, 2016, Strona(/y) 054015, ISSN 0964-1726
Wydawca: Institute of Physics Publishing
DOI: 10.1088/0964-1726/25/5/054015

Tissue engineering scaffolds for bone repair: General aspects

Autorzy: Díaz Lantada, A.; De Blas Romero, A.; Valido Moreno, S.; Curras, D.; Téllez, M.; Schwentenwein, M.; Jelinek, C.; Homa, J.
Opublikowane w: Handbook on Microsystems for Enhanced Control of Cell Behavior, 2016, ISBN 978-3-319-29328-8
Wydawca: Springer

Prawa własności intelektualnej

Lichthärtbare Zusammensetzung

Numer wniosku/publikacji: AT EP17168663
Data: 2017-04-28
Wnioskodawca/wnioskodawcy: TECHNISCHE UNIVERSITAET WIEN

DEVICE FOR PROCESSING PHOTOPOLYMERIZABLE MATERIAL IN ORDER TO CONSTRUCT A SHAPED BODY LAYER BY LAYER

Numer wniosku/publikacji: WO 2015074088
Data: 2015-05-28

Verfahren zum Verfestigen eines photopolymerisierbaren, diffus reflektierenden Materials

Numer wniosku/publikacji: PCT AT2017/000059
Data: 2017-08-30
Wnioskodawca/wnioskodawcy: LITHOZ GMBH

Rezultaty

Publikacje

Prawa własności intelektualnej

Udostępnij tę stronę

Pobierz