European Commission logo
italiano italiano
CORDIS - Risultati della ricerca dell’UE
CORDIS

High precision positioning for cooperative ITS applications

Obiettivo

Cooperative intelligent transport system (C-ITS) applications rely on knowledge of the geographical positions of vehicles. Unfortunately, satellite-based positioning systems (e.g. GPS and Galileo) are unable to provide sufficiently accurate position information for many important applications and in certain challenging but common environments (e.g. urban canyons and tunnels). This project addresses this problem by combining traditional satellite systems with an innovative use of on-board sensing and infrastructure-based wireless communication technologies (e.g. Wi-Fi, ITS-G5, UWB tracking, Zigbee, Bluetooth, LTE...) to produce advanced, highly-accurate positioning technologies for C-ITS. The results will be integrated into the facilities layer of ETSI C-ITS architecture and will thereby become available for all C-ITS applications, including those targeting the challenging use cases Traffic Safety of Vulnerable Users and Autonomous Driving/platooning. The project will therefore go beyond ego- and infra-structure-based positioning by incorporating them as building blocks to develop an enhanced European-wide positioning service platform based on enhanced Local Dynamic Maps and built on open European standards. Proof-of-concept systems developed in the project will combine infrastructure devices, reference vehicles, communication between road users and offline processing, and will be evaluated under real conditions at TASS' test site in Helmond, with the objective of assessing its capabilities to provide high precision positioning to C-ITS applications. When possible, codes and prototypes will be fully open-source and made available to the larger research community as well as to the automotive industry at the end of the project. All achievements will be published in top-tier events further guaranteeing an open-access to all technical publications produced. The project also aims at a strong commitment to bringing the developed solutions to standardization bodies

Invito a presentare proposte

H2020-MG-2014-2015

Vedi altri progetti per questo bando

Bando secondario

H2020-MG-2014_TwoStages

Meccanismo di finanziamento

RIA - Research and Innovation action

Coordinatore

CONSTRUCTOR UNIVERSITY BREMEN GGMBH
Contribution nette de l'UE
€ 917 500,00
Indirizzo
CAMPUS RING 1
28725 Bremen
Germania

Mostra sulla mappa

Regione
Bremen Bremen Bremen, Kreisfreie Stadt
Tipo di attività
Higher or Secondary Education Establishments
Collegamenti
Costo totale
€ 917 500,00

Partecipanti (13)