Laser-induced Nanostructures as Biomimetic Model of Fluid Transport in the Integument of Animals

Rezultaty

Large-area laser-fabricated biomimetic structures

This deliverable involves the identification of the optimum processing parameters for the fabrication of moderatesize 1 cm2 flat areas mimicking lizard and buglike surface structures The starting point will be the parameters identified in D44 Optimum parameters will be identified by means of a systematic study on different inorganic materials employing highrepetition rate pico and femtosecond lasers and beam scanning The parameter space explored will include substrate material laser wavelength pulse duration repetition rate polarization pulse energy spot size scan velocity line separation and number of scans Optimized structures will be fabricated and their functional performance in terms of fluid transport tested

Data Management Plan (DMP) - final report

The report will summarize the final state of the DMP

Publication of results on lizard skin

Delivery D2.1 publically reports on Task 2.1 (Characterization lizard skin) in the form of an article in a peer-reviewed scientific journal about the findings on the function of micro-structures on the lizard integument for water transport using the Open Access model after end of Task 2.1.

Data Management Plan (DMP) - interim report

In the framework of the Open Research Data pilot the consortium will prepare a DMP in month 6.

Publication of results on laser-induced surface structures on inorganic materials

Delivery D3.3 publically presents project results of Task 3.1 (Laser-based mimicking of lizard structures) at the traditional laser-matter interaction symposium at the spring meeting 2016 of the European Materials Research Society (May 2nd - 6th 2016 in Lille France), associated with an article submitted to the symposium proceedings (peer-reviewed). [The paper submission deadline for the symposium proceedings is expected to be in May/June 2016.] The current state of the results of Task 3.1 and the corresponding paper/draft will be presented during the first action check meeting in m12. Delivery D3.3 complements delivery D3.2.

Large-area laser-fabricated self-organized structures

This deliverable involves the identification of the optimum processing parameters for the fabrication of moderate-size (1 cm2), flat areas featuring nanostructured surfaces obtained by laser-induced self-organization processes. In particular, the main effort will be directed towards fabrication of surface structures consisting of parallel grooves and cone structures with controllable spacing and orientation. Optimum parameters will be identified by means of a systematic study on different inorganic materials, employing high-repetition rate pico- and femtosecond lasers and beam scanning. The parameter space explored will include substrate material, laser wavelength, pulse duration, repetition rate, polarization, pulse energy, spot size, scan velocity, line separation, and number of scans. The quality of the fabricated nanostructures in terms of arrangement, size, periodicity, lateral extension will be assessed by optical microscopy, scanning electron and atomic force microscopy.

Publication of results on bug cuticles

Delivery D24 publically reports on results of Task 22 characterisation bug cuticle and Task 23 Polymer replica of bug cuticle in form of an article in a peerreviewed scientific journal about the findings on the function of micro and nanostructures of the bark bug cuticle for water transport using the Open Access model Deliverable D24 is based on deliverable D23 and partially on D22

Publication of results on hydrodynamic modelling

Delivery D26 publically reports on results of Task 25 Theoretical modelling in form of an Article in a highranked peerreviewed scientific journal about the results of theoretical modelling of the fluid transport on the nanostructures in animal integuments by the methods of hydrodynamics using the Open Access model after end of Task 25 Deliverable D26 is linked to deliverable D24

Publication of results on laser-mimicking of bug-like surface structures and its fluid transport

Delivery D36 publically presents project results of Task 32 Laserbased mimicking of bug structures and Task 33 Characterization of fluid transport and frictionwear at the traditional lasermatter interaction symposium at the spring meeting 2017 of the European Materials Research Society associated with an article published in the symposium proceedings peerreviewed Date and location of the conference and associated deadlines are currently not specified Delivery D36 complements delivery D35

Laser-fabricated biomimetic structures up-scaled to manufacturing size and shape

This deliverable involves the identification of the optimum processing parameters for the fabrication of largesize 10 cm2 nonflat areas mimicking lizard and buglike surface structures on selected inorganic materials employing highrepetition rate pico and femtosecond lasers and beam scanning The parameter space explored will include the parameters listed in D42 and additionally include input beam diameter beam shape focal length of scanning lens and dynamic beam expander settings Optimized structures will be fabricated and their functional performance in terms of fluid transport tested

SEM images of nanostructures on web site

A comparison study will be performed by means of scanning electron microscopy (SEM) on micro- and nanostructures found on bug cuticles and similar features on polymer replicas of the bug cuticle. A summary of these findings will be published together with typical SEM images on the Website on the public section of the LiNaBioFluid web site. Delivery D2.2 presents first results from Task 2.2 (Characterization bug cuticle) and Task 2.3 (Polymer replica of bug cuticle).

Public summary of biological fluid transport mechanisms on web site

In milestone M2 (month 12), the status of understanding of the biological mechanism for the fluid transport out of the bug capillaries onto the plates of the cuticle will be reported. A summary of these findings will be published on the public section of the LiNaBioFluid web site. Deliverable D2.3 is partially based on deliverable D2.2.

Images of first results of lizard-like surface morphologies

Delivery D3.2 publically reports on Task 3.1, which involves systematic laser irradiation experiments on flat samples made of inorganic materials along with the identification of the optimum processing parameters for laser-based mimicking of lizard-like surface structures. As a result, in Delivery D3.2 a comparison of SEM images of micro- and nanostructures found on lizard skin and of similar laser-structures generated on hard inorganic materials will be published on the LiNaBioFluid Website. Delivery D3.2 complements delivery D3.3.

Scientific articles and conference contributions
“LiNaBioFluid” web site

To disseminate relevant up-to-date information regarding the project, a web site will be set up. This will be the main entry point to the project’s general information. The web site will be updated regulary. Part of it will be secure, so that all partners have access to relevant documents, contact data and other material developed through the project.

Public summary of laser processing of bug-like surface structures with fast fluid transport

In milestone M5 m24 the status of understanding of the laserbased mimicking of buglike structures on inorganic materials surfaces providing a fast fluid transport will be reported This includes an upscaling and largearea manufacturing of the different characteristic surface structures identified in Tasks 31 32 and performing fluid transport tests Task 33 for identifying the wettingspreading behavior of the laser processed surfaces Associated with that milestone M5 in delivery D35 a public summary of these findings will be published on the LiNaBioFluid Website Delivery D35 complements delivery D34

Images of first results of bug-like surface morphologies

Delivery D34 publically reports on Task 32 which involves systematic laser irradiation experiments on flat samples made of inorganic materials along with the identification of the optimum processing parameters for laserbased mimicking of buglike surface structures As a result in Delivery D34 a comparison of SEM images of micro and nanostructures found on bug cuticles and of similar laserinduced structures generated on hard inorganic materials will be published on the LiNaBioFluid Website

Demonstrator for a low-friction slide bearing

This deliverable involves the design fabrication and testing of a slide bearing or pump part with laserstructured surface on inorganic material with bark buglike design featuring fast transport of lubricating fluids which results in a friction coefficient reduced by more than 90 compared to that of a plain surface of the same material The design will be defined according to the best results of D44 D42 and fabrication will be performed with using the highrepetition rate ultrashort laser system on the most suited material identified in D44 and D42 The functional performance of the demonstrator in terms of fluid transport will be tested and compared to stateoftheart technology

Publikacje

Study of phase change LIPPS formation in Si by fs-resolved microscopy

Autorzy: Daniel Puerto, Mario Garcia-Lechuga, Javier Solis, Jan Siegel
Opublikowane w: Conference on Lasers and Electro-Optics, 2016, Strona(/y) STh1Q.1, ISBN 978-1-943580-11-8
Wydawca: OSA
DOI: 10.1364/CLEO_SI.2016.STh1Q.1

Laser-induced Periodic Surface Structures (LIPSS) - A Scientific Evergreen

Autorzy: Joern Bonse, Sandra Höhm, Sabrina Kirner, Arkadi Rosenfeld, Jörg Krüger
Opublikowane w: Conference on Lasers and Electro-Optics, 2016, Strona(/y) STh1Q.3, ISBN 978-1-943580-11-8
Wydawca: OSA
DOI: 10.1364/CLEO_SI.2016.STh1Q.3

The Texas horned lizard as model for robust capillary structures for passive directional transport of cooling lubricants

Autorzy: Philipp Comanns, Kai Winands, Mario Pothen, Raya A. Bott, Hermann Wagner, Werner Baumgartner
Opublikowane w: Bioinspiration, Biomimetics, and Bioreplication 2016, Numer 9797, 2016, Strona(/y) 979711
Wydawca: SPIE
DOI: 10.1117/12.2218873

Three-dimensional photonic structures on transparent substrates fabricated by two-photon polymerization for use as cell substrates and for wetting experiments

Autorzy: Johannes Heitz, Cristina Plamadeala, Moritz Wiesbauer, Peter Freudenthaler, Richard Wollhofen, Jaroslaw Jacak, Sujitha Puthukodan, Thomas A. Klar, Agnes Weth, Werner Baumgartner, Birte Magnus, Rainer Marksteiner
Opublikowane w: 2016 18th International Conference on Transparent Optical Networks (ICTON), 2016, Strona(/y) 1-4, ISBN 978-1-5090-1467-5
Wydawca: IEEE
DOI: 10.1109/ICTON.2016.7550521

Applications of laser-induced periodic surface structures (LIPSS)

Autorzy: Jörn Bonse, Sabrina V. Kirner, Sandra Höhm, Nadja Epperlein, Dirk Spaltmann, Arkadi Rosenfeld, Jörg Krüger
Opublikowane w: Laser-based Micro- and Nanoprocessing XI, Numer 10092, 2017, Strona(/y) 100920N, ISBN 9781-510606258
Wydawca: SPIE
DOI: 10.1117/12.2250919

Bio-inspired Microfluidic Devices for Passive, Directional Liquid Transport: Model-based Adaption for Different Materials

Autorzy: Gerda Buchberger, Florian Hischen, Philipp Comanns, Richard Baumgartner, Alexander Kogler, Andreas Buchsbaum, Siegfried Bauer, Werner Baumgartner
Opublikowane w: Procedia Engineering, Numer 120, 2015, Strona(/y) 106-111, ISSN 1877-7058
Wydawca: Elsevier
DOI: 10.1016/j.proeng.2015.08.576

Ripple formation on nickel irradiated with radially polarized femtosecond beams

Autorzy: George D. Tsibidis, Evangelos Skoulas, Emmanuel Stratakis
Opublikowane w: Optics Letters, Numer 40/22, 2015, Strona(/y) 5172, ISSN 0146-9592
Wydawca: Optical Society of America
DOI: 10.1364/OL.40.005172

Femtosecond laser-controlled self-assembly of amorphous-crystalline nanogratings in silicon

Autorzy: Daniel Puerto, Mario Garcia-Lechuga, Javier Hernandez-Rueda, Adianez Garcia-Leis, Santiago Sanchez-Cortes, Javier Solis, Jan Siegel
Opublikowane w: Nanotechnology, Numer 27/26, 2016, Strona(/y) 265602, ISSN 0957-4484
Wydawca: Institute of Physics Publishing
DOI: 10.1088/0957-4484/27/26/265602

Bone-forming cells with pronounced spread into the third dimension in polymer scaffolds fabricated by two-photon polymerization

Autorzy: J. Heitz, C. Plamadeala, M. Wiesbauer, P. Freudenthaler, R. Wollhofen, J. Jacak, T. A. Klar, B. Magnus, D. Köstner, A. Weth, W. Baumgartner, R. Marksteiner
Opublikowane w: Journal of Biomedical Materials Research Part A, Numer 105/3, 2017, Strona(/y) 891-899, ISSN 1549-3296
Wydawca: John Wiley & Sons Inc.
DOI: 10.1002/jbm.a.35959

Cutaneous water collection by a moisture-harvesting lizard, the thorny devil ( Moloch horridus )

Autorzy: Philipp Comanns, Philip C. Withers, Falk J. Esser, Werner Baumgartner
Opublikowane w: The Journal of Experimental Biology, Numer 219/21, 2016, Strona(/y) 3473-3479, ISSN 0022-0949
Wydawca: The Company of Biologists Ltd.
DOI: 10.1242/jeb.148791

Adaptive camouflage: what can be learned from the wetting behaviour of the tropical flat bugs Dysodius lunatus and D ysodius magnus

Autorzy: Florian Hischen, Vladislav Reiswich, Desirée Kupsch, Ninon De Mecquenem, Michael Riedel, Markus Himmelsbach, Agnes Weth, Ernst Heiss, Oskar Armbruster, Johannes Heitz, Werner Baumgartner
Opublikowane w: Biology Open, Numer 6/8, 2017, Strona(/y) 1209-1218, ISSN 2046-6390
Wydawca: Company of Biologists Ltd.
DOI: 10.1242/bio.026070

“Fluidic diode” for passive unidirectional liquid transport bioinspired by the spermathecae of fleas

Autorzy: Gerda Buchberger, Alexander Kogler, Agnes Weth, Richard Baumgartner, Philipp Comanns, Siegfried Bauer, Werner Baumgartner
Opublikowane w: Journal of Bionic Engineering, Numer 15/1, 2018, Strona(/y) 42-56, ISSN 1672-6529
Wydawca: Elsevier BV
DOI: 10.1007/s42235-017-0003-7

Mimicking bug-like surface structures and their fluid transport produced by ultrashort laser pulse irradiation of steel

Autorzy: S. V. Kirner, U. Hermens, A. Mimidis, E. Skoulas, C. Florian, F. Hischen, C. Plamadeala, W. Baumgartner, K. Winands, H. Mescheder, J. Krüger, J. Solis, J. Siegel, E. Stratakis, J. Bonse
Opublikowane w: Applied Physics A, Numer 123/12, 2017, Strona(/y) 754, ISSN 0947-8396
Wydawca: Springer Verlag
DOI: 10.1007/s00339-017-1317-3

The external scent efferent system of selected European true bugs (Heteroptera): a biomimetic inspiration for passive, unidirectional fluid transport

Autorzy: Florian Hischen, Gerda Buchberger, Cristina Plamadeala, Oskar Armbruster, Ernst Heiss, Kai Winands, Martin Schwarz, Bert Jüttler, Johannes Heitz, Werner Baumgartner
Opublikowane w: Journal of The Royal Society Interface, Numer 15/140, 2018, Strona(/y) 20170975, ISSN 1742-5689
Wydawca: The Royal Society
DOI: 10.1098/rsif.2017.0975

Femtosecond laser-induced microstructures on Ti substrates for reduced cell adhesion

Autorzy: J. Heitz, C. Plamadeala, M. Muck, O. Armbruster, W. Baumgartner, A. Weth, C. Steinwender, H. Blessberger, J. Kellermair, S. V. Kirner, J. Krüger, J. Bonse, A. S. Guntner, A. W. Hassel
Opublikowane w: Applied Physics A, Numer 123/12, 2017, Strona(/y) 734, ISSN 0947-8396
Wydawca: Springer Verlag
DOI: 10.1007/s00339-017-1352-0

Adsorption and movement of water by skin of the Australian thorny devil (Agamidae: Moloch horridus )

Autorzy: Philipp Comanns, Falk J. Esser, Peter H. Kappel, Werner Baumgartner, Jeremy Shaw, Philip C. Withers
Opublikowane w: Royal Society Open Science, Numer 4/9, 2017, Strona(/y) 170591, ISSN 2054-5703
Wydawca: The Royal Society
DOI: 10.1098/rsos.170591

Bioinspired polymer microstructures for directional transport of oily liquids

Autorzy: C. Plamadeala, F. Hischen, R. Friesenecker, R. Wollhofen, J. Jacak, G. Buchberger, E. Heiss, T.A. Klar, W. Baumgartner, J. Heitz
Opublikowane w: Royal Society Open Science, Numer 4/3, 2017, Strona(/y) 160849, ISSN 2054-5703
Wydawca: The Royal Society
DOI: 10.1098/rsos.160849

Automated polarization control for the precise alignment of laser-induced self-organized nanostructures

Autorzy: Ulrike Hermens, Mario Pothen, Kai Winands, Kristian Arntz, Fritz Klocke
Opublikowane w: Optics and Lasers in Engineering, Numer 101, 2018, Strona(/y) 44-50, ISSN 0143-8166
Wydawca: Elsevier BV
DOI: 10.1016/j.optlaseng.2017.10.001

Compensation of scanner based inertia for laser structuring processes

Autorzy: Mario Pothen, Kai Winands, Fritz Klocke
Opublikowane w: Journal of Laser Applications, Numer 29/1, 2017, Strona(/y) 012017, ISSN 1042-346X
Wydawca: Laser Institute of America
DOI: 10.2351/1.4974906

Design and Function for Freeform Surfaces

Autorzy: Holger Mescheder, Ulrike Hermens
Opublikowane w: Laser Technik Journal, Numer 15/1, 2018, Strona(/y) 29-31, ISSN 1613-7728
Wydawca: Wiley-VCH Verlag GmbH & Co.
DOI: 10.1002/latj.201800005

Modelling periodic structure formation on 100Cr6 steel after irradiation with femtosecond-pulsed laser beams

Autorzy: George D. Tsibidis, Alexandros Mimidis, Evangelos Skoulas, Sabrina V. Kirner, Jörg Krüger, Jörn Bonse, Emmanuel Stratakis
Opublikowane w: Applied Physics A, Numer 124/1, 2018, Strona(/y) 27, ISSN 0947-8396
Wydawca: Springer Verlag
DOI: 10.1007/s00339-017-1443-y

Mimicking lizard-like surface structures upon ultrashort laser pulse irradiation of inorganic materials

Autorzy: U. Hermens, S.V. Kirner, C. Emonts, P. Comanns, E. Skoulas, A. Mimidis, H. Mescheder, K. Winands, J. Krüger, E. Stratakis, J. Bonse
Opublikowane w: Applied Surface Science, Numer 418, 2017, Strona(/y) 499-507, ISSN 0169-4332
Wydawca: Elsevier BV
DOI: 10.1016/j.apsusc.2016.12.112

Femtosecond Laser Texturing of Surfaces for Tribological Applications

Autorzy: Jörn Bonse, Sabrina Kirner, Michael Griepentrog, Dirk Spaltmann, Jörg Krüger
Opublikowane w: Materials, Numer 11/5, 2018, Strona(/y) 801, ISSN 1996-1944
Wydawca: MDPI Open Access Publishing
DOI: 10.3390/ma11050801

Tribological performance of titanium samples oxidized by fs-laser radiation, thermal heating, or electrochemical anodization

Autorzy: S. V. Kirner, N. Slachciak, A. M. Elert, M. Griepentrog, D. Fischer, A. Hertwig, M. Sahre, I. Dörfel, H. Sturm, S. Pentzien, R. Koter, D. Spaltmann, J. Krüger, J. Bonse
Opublikowane w: Applied Physics A, Numer 124/4, 2018, Strona(/y) 326, ISSN 0947-8396
Wydawca: Springer Verlag
DOI: 10.1007/s00339-018-1745-8

Femtosecond laser-induced periodic surface structures on titanium nitride coatings for tribological applications

Autorzy: J. Bonse, S.V. Kirner, R. Koter, S. Pentzien, D. Spaltmann, J. Krüger
Opublikowane w: Applied Surface Science, Numer 418, 2017, Strona(/y) 572-579, ISSN 0169-4332
Wydawca: Elsevier BV
DOI: 10.1016/j.apsusc.2016.10.132

Nanometer-resolved chemical analyses of femtosecond laser-induced periodic surface structures on titanium

Autorzy: Sabrina V. Kirner, Thomas Wirth, Heinz Sturm, Jörg Krüger, Jörn Bonse
Opublikowane w: Journal of Applied Physics, Numer 122/10, 2017, Strona(/y) 104901, ISSN 0021-8979
Wydawca: American Institute of Physics
DOI: 10.1063/1.4993128

Laser-Induced Periodic Surface Structures— A Scientific Evergreen

Autorzy: Jorn Bonse, Sandra Hohm, Sabrina V. Kirner, Arkadi Rosenfeld, Jorg Kruger
Opublikowane w: IEEE Journal of Selected Topics in Quantum Electronics, Numer 23/3, 2017, Strona(/y) 9000615, ISSN 1077-260X
Wydawca: Institute of Electrical and Electronics Engineers
DOI: 10.1109/jstqe.2016.2614183

Passive water collection with the integument: mechanisms and their biomimetic potential

Autorzy: Philipp Comanns
Opublikowane w: The Journal of Experimental Biology, Numer 221/10, 2018, Strona(/y) jeb153130, ISSN 0022-0949
Wydawca: The Company of Biologists Ltd.
DOI: 10.1242/jeb.153130

Coherent scatter-controlled phase-change grating structures in silicon using femtosecond laser pulses

Autorzy: Yasser Fuentes-Edfuf, Mario Garcia-Lechuga, Daniel Puerto, Camilo Florian, Adianez Garcia-Leis, Santiago Sanchez-Cortes, Javier Solis, Jan Siegel
Opublikowane w: Scientific Reports, Numer 7/1, 2017, ISSN 2045-2322
Wydawca: Nature Publishing Group
DOI: 10.1038/s41598-017-04891-3

Freiformflächen mit dem Laser gezielt strukturieren

Autorzy: Mescheder, Holger; Hermens, Ulrike
Opublikowane w: Maschinenmarkt. MM, das Industriemagazin, Numer 1, 2018, ISSN 0341-5775
Wydawca: Vogel Verlag und Druck GmbH & Co. KG

Author Correction: Coherent scatter-controlled phase-change grating structures in silicon using femtosecond laser pulses

Autorzy: Yasser Fuentes-Edfuf, Mario Garcia-Lechuga, Daniel Puerto, Camilo Florian, Adianez Garcia-Leis, Santiago Sanchez-Cortes, Javier Solis, Jan Siegel
Opublikowane w: Scientific Reports, Numer 8/1, 2018, ISSN 2045-2322
Wydawca: Nature Publishing Group
DOI: 10.1038/s41598-018-24091-x

Partial ablation of Ti/Al nano-layer thin film by single femtosecond laser pulse

Autorzy: B. Gaković, G. D. Tsibidis, E. Skoulas, S. M. Petrović, B. Vasić, E. Stratakis
Opublikowane w: Journal of Applied Physics, Numer 122/22, 2017, Strona(/y) 223106, ISSN 0021-8979
Wydawca: American Institute of Physics
DOI: 10.1063/1.5016548

Ripple formation on silver after irradiation with radially polarised ultrashort-pulsed lasers

Autorzy: George D. Tsibidis, Emmanuel Stratakis
Opublikowane w: Journal of Applied Physics, Numer 121/16, 2017, Strona(/y) 163106, ISSN 0021-8979
Wydawca: American Institute of Physics
DOI: 10.1063/1.4982071

Convection roll-driven generation of supra-wavelength periodic surface structures on dielectrics upon irradiation with femtosecond pulsed lasers

Autorzy: George D. Tsibidis, Evangelos Skoulas, Antonis Papadopoulos, Emmanuel Stratakis
Opublikowane w: Physical Review B, Numer 94/8, 2016, ISSN 2469-9950
Wydawca: American Physical Society
DOI: 10.1103/PhysRevB.94.081305

Ultrafast Moving-Spot Microscopy: Birth and Growth of Laser-Induced Periodic Surface Structures

Autorzy: Mario Garcia-Lechuga, Daniel Puerto, Yasser Fuentes-Edfuf, Javier Solis, Jan Siegel
Opublikowane w: ACS Photonics, Numer 3/10, 2016, Strona(/y) 1961-1967, ISSN 2330-4022
Wydawca: American Chemical Society
DOI: 10.1021/acsphotonics.6b00514

Biomimetic surface structuring using cylindrical vector femtosecond laser beams

Autorzy: Evangelos Skoulas, Alexandra Manousaki, Costas Fotakis, Emmanuel Stratakis
Opublikowane w: Scientific Reports, Numer 7/1, 2017, ISSN 2045-2322
Wydawca: Nature Publishing Group
DOI: 10.1038/srep45114

Fabrication of amorphous micro-ring arrays in crystalline silicon using ultrashort laser pulses

Autorzy: Yasser Fuentes-Edfuf, Mario Garcia-Lechuga, Daniel Puerto, Camilo Florian, Adianez Garcia-Leis, Santiago Sanchez-Cortes, Javier Solis, Jan Siegel
Opublikowane w: Applied Physics Letters, Numer 110/21, 2017, Strona(/y) 211602, ISSN 0003-6951
Wydawca: American Institute of Physics
DOI: 10.1063/1.4984110

Three-Dimensional Self-Organization in Nanocomposite Layered Systems by Ultrafast Laser Pulses

Autorzy: Zeming Liu, Jan Siegel, Mario Garcia-Lechuga, Thierry Epicier, Yaya Lefkir, Stéphanie Reynaud, Matthieu Bugnet, Francis Vocanson, Javier Solis, Guy Vitrant, Nathalie Destouches
Opublikowane w: ACS Nano, Numer 11/5, 2017, Strona(/y) 5031-5040, ISSN 1936-0851
Wydawca: American Chemical Society
DOI: 10.1021/acsnano.7b01748

The influence of dynamical change of optical properties on the thermomechanical response and damage threshold of noble metals under femtosecond laser irradiation

Autorzy: George D. Tsibidis
Opublikowane w: Journal of Applied Physics, Numer 123/8, 2018, Strona(/y) 085903, ISSN 0021-8979
Wydawca: American Institute of Physics
DOI: 10.1063/1.5011738

Optical spectroscopy study of nano- and microstructures fabricated by femtosecond laser pulses on ZnO based systems

Autorzy: Esther de Prado, Camilo Florian, Belén Sotillo, Jan Siegel, Javier Solis, Paloma Fernández
Opublikowane w: CrystEngComm, Numer 20/21, 2018, Strona(/y) 2952-2960, ISSN 1466-8033
Wydawca: Royal Society of Chemistry
DOI: 10.1039/C8CE00436F

Ultrafast dynamics of non-equilibrium electrons and strain generation under femtosecond laser irradiation of Nickel

Autorzy: George D. Tsibidis
Opublikowane w: Applied Physics A, Numer 124/4, 2018, ISSN 0947-8396
Wydawca: Springer Verlag
DOI: 10.1007/s00339-018-1704-4

Formation of periodic surface structures on dielectrics after irradiation with laser beams of spatially variant polarisation: a comparative study

Autorzy: Antonis Papadopoulos, Evangelos Skoulas, George D. Tsibidis, Emmanuel Stratakis
Opublikowane w: Applied Physics A, Numer 124/2, 2018, ISSN 0947-8396
Wydawca: Springer Verlag
DOI: 10.1007/s00339-018-1573-x

Water Acquisition and Water Transport on the Integument of Moisture Harvesting Lizards: Biophysical Fundamentals and Technical Applicability

Autorzy: Philipp Comanns
Opublikowane w: 2016
Wydawca: RWTH Aachen University

Investigation of surface-liquid-interaction on flat bugs (Aradidae), selected European true bugs (Heteroptera), and transfer of principles onto technical surfaces

Autorzy: Florian Hischen
Opublikowane w: 2017
Wydawca: RWTH Aachen University

Moisture-Harvesting Reptiles: A Review

Autorzy: Anna-Christin Joel, Gerda Buchberger, Philipp Comanns
Opublikowane w: Functional Surfaces in Biology III, Biologically-Inspired Systems, Numer 10, 2017, Strona(/y) 93-106
Wydawca: Springer International Publishing
DOI: 10.1007/978-3-319-74144-4_4

Deliverable 4.3 Laser‐fabricated biomimetic structures up‐scaled to manufacturing size and shape

Autorzy: Siegel,Jan
Opublikowane w: Numer 1, 2018
Wydawca: CERN
DOI: 10.5281/zenodo.1292985

Deliverable 2.2: SEM images of nanostructures

Autorzy: Heitz,Johannes
Opublikowane w: Numer 1, 2018
Wydawca: CERN
DOI: 10.5281/zenodo.1292959

Deliverable D2.3: Public summary of biological fluid transport mechanism on website

Autorzy: Comanns, Philipp; Heitz,Johannes
Opublikowane w: Numer 1, 2018
Wydawca: CERN
DOI: 10.5281/zenodo.1292961

Publications of the LiNaBioFluid project at BAM

Autorzy: Bonse,Jörn
Opublikowane w: Numer 1, 2018
Wydawca: CERN
DOI: 10.5281/zenodo.1292994

Dissemination activities at BAM

Autorzy: Bonse,Jörn
Opublikowane w: Numer 1, 2018
Wydawca: CERN
DOI: 10.5281/zenodo.1292990

Deliverable D3.5: Public summary of laser processing of bug-like surface structures with fast fluid transport

Autorzy: Stratakis, Emmanuel
Opublikowane w: Numer 1, 2018
Wydawca: CERN
DOI: 10.5281/zenodo.1292979

Deliverable D2.6: Publication of results on hydrodynamic modelling

Autorzy: Hischen, Florian
Opublikowane w: Numer 1, 2018
Wydawca: CERN
DOI: 10.5281/zenodo.1292965

Deliverable D3.6: Publication of results on laser-mimicking of bug-like surface structures and its fluid transport

Autorzy: Bonse, Jörn
Opublikowane w: Numer 1, 2018
Wydawca: CERN
DOI: 10.5281/zenodo.1292982

Deliverable 4.2: Large‐area laser‐fabricated biomimetic structures

Autorzy: Siegel,Jan
Opublikowane w: Numer 1, 2018
Wydawca: CERN
DOI: 10.5281/zenodo.1292984

Deliverable 3.4: Images of first results of bug-like surface morphologies

Autorzy: Hermens, Ulrike
Opublikowane w: Numer 1, 2018
Wydawca: CERN
DOI: 10.5281/zenodo.1292977

Deliverable D2.1: Publication of results on lizard skin

Autorzy: Comanns,Philipp
Opublikowane w: Numer 1, 2018
Wydawca: CERN
DOI: 10.5281/zenodo.1292957

Deliverable D3.3: Publication of results on laser-induced surface structures on inorganic materials

Autorzy: Bonse,Jörn
Opublikowane w: Numer 1, 2018
Wydawca: CERN
DOI: 10.5281/zenodo.1292971

Deliverable D2.4: Publication of results on bug cuticles

Autorzy: Heitz, Johannes
Opublikowane w: Numer 1, 2018
Wydawca: CERN
DOI: 10.5281/zenodo.1292963

Neue mikrofluidische Systeme - von der Echse zum gezielten Fluidtransport

Autorzy: Hermens, Ulrike
Opublikowane w: LABO, Numer 1, 2017, ISSN 0344-5208
Wydawca: WEKA BUSINESS MEDIEN GmbH

Wyszukiwanie danych OpenAIRE...

Rezultaty

Publikacje

Udostępnij tę stronę

Pobierz