WP1 performed during first 16 months of the project lifetime. DIPE led in collaboration with NOVA ID, BSU, LUT, Blueorizon and Solene-R. Elaborated materials and composites used to be subjected to the detailed characterization within the WP2 and WP3 implementation on Mechanism Elaboration, Device Assembling leading.
Reference onset materials was identified and used for work in the following WPs implementation. These results are in details described as First Periodic Reports and Deliverables D1.1 “Protocol on produced NMs”, and D1.2 “Protocol on NMs characterization”. From total of 30 PMs planned the 29.5 PMs are implemented.
WP2 performed during 20 months. ENSTIMA led in collaboration with all partners. Results elaborated in the WP1 implementation were used to the evaluation of the overall HUNTER System Operation Mechanism.
Mechanism of humidity to electricity conversion process has been elaborated. These results are described as D2.1 “Protocol on hetejojunction characterization and corrective actions”, D2.2 “Simulated physical parameters of device” and D2.3 “Protocol on operation mechanism of the "humidity-to- electricity" system and on potential HUNTER system performance”. From total 48 PMs planned the 45 PMs are implemented.
WP3 performed during 10 months. The UNINOVA led in collaboration with BSU, BLUEORIZON, and ENSTIMA. Elaborated test devices were subjected to the WP4 implementation on Device Testing.
Device Assembling has been attested and optimized. These results are in details described as D3.1 “NMs deposition and device structure optimization”. From total of 26 PMs planned for WP3 implementation the 24 PMs (92%) are implemented.
WP4 performed for 16 months. BSU led in collaboration UNINOVA, NOVA ID, LUT and DIPE. Results were subjected to the WP5 implementation on Corrective Actions.
All scientific data reflected in deliverable D4.1 “Technological recommendations on system components design.” and D4.2 “Protocol on information to correlate systems design with electronic properties and systems performance”. From total 34 PMs planned the 32.5 PMs (96%) are implemented.
WP5 performed during project lifetime. UNINOVA led in collaboration with all partners. The corrective actions were carried out according to the results obtained within the WP2 and WP4 implementation. Work within WP5 is divided by two tasks. Task 5.1: Corrective actions on the HUNTER system design and Task 5.2 Coordination of the progress monitoring and risk assessment.
All scientific data reflected in deliverables elaborated under WP6 implementation. From total of 32 PMs planned for WP5 implementation the 29 PMs (91%) are implemented.
WP6 performed for the last 12 months. NOVA ID led in collaboration with the UNINOVA, ENSTIMA, DIPE, SOLENE-R, BLUEORIZON BSU and NANOTECH. Work within WP6 was focused on Task 6.1 Prototype elaboration. Task 6.2 Patent preparatory work. All scientific data in details reflected in deliverables elaborated under WP6 implementation namely, D6.1 “Technical documentation, for HUNTER development and Production design work Protocol”, D6.2 “Technical documentation and technological requirements for device production” and D6.3 “Patent application”. From total of 24 PMs planned for WP6 implementation the 22 PMs (92%) are implemented.
It should be noted that for the final period of the project HUNTER device prototype has been created and tested additionally, patent has been submitted. Obtained results has been presented in over 30 international conferences, 25 peer-reviewed publications and 1 non-scientific publication, created project website, and researchgate page. Thus, until reporting period 1000 persons viewed project information.
