Cel The present proposal is phase II of a currently running Pilot and Demonstration project. It is focused on the application of ultra fast cooling to thin strip. The work programme of the project includes the design, building and testing in the normal operating conditions of the hot strip mill, of a novel short cooling equipment, placed immediately behind the last rolling stand. It allows to cool the strip in a very fast and controllable way. One of the main objectives is to first design, build and test a pinch roll, placed at the exit of a cooling equipment in order to avoid the flying of the thinner strips under the influence of the cooling water pressure. This will allow to apply the cooling from the head end of the strip on and hereby to improve the temperature control in the strip and to ensure a constant cooling temperature and consequently consistent mechanical properties over the whole length of the hot strips. Program(-y) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Temat(-y) T3 - Rolling and product treatment Zaproszenie do składania wniosków Data not available System finansowania CSC - Cost-sharing contracts Koordynator COCKERILL SAMBRE Wkład UE Brak danych Adres Quai du Halage, 10 4400 FLEMALLE Belgia Zobacz na mapie Koszt całkowity Brak danych Uczestnicy (3) Sortuj alfabetycznie Sortuj według wkładu UE Rozwiń wszystko Zwiń wszystko CENTRE DE RECHERCHES METALLURGIQUES Belgia Wkład UE Brak danych Adres Rue Ernest Solvay, 11 4000 LIEGE Zobacz na mapie Koszt całkowity Brak danych HOOGOVENS UGB Belgia Wkład UE Brak danych Adres 2, Rue des Rivaux 7100 LA LOUVIERE Zobacz na mapie Koszt całkowity Brak danych SMS SCHLOEMANN-SIEMAG Niemcy Wkład UE Brak danych Adres Schweisfurth 8 57271 HILCHENBACH Zobacz na mapie Koszt całkowity Brak danych