Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski pl
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
Zawartość zarchiwizowana w dniu 2022-11-21

Study of treatment of oily steelworks sludge at demonstration plant level for recovery of the ferrous phase and lubricating oils

Cel

The aim of this research is to achieve the most comprehensive possible recovery of the constituents of oily sludges and their economic exploitation. In comparison to other processes proposed, this approach has the additional advantage of being able to sell the recycled oil at market prices.
Tests showed that the extraction yield is the highest (approx. 90-95%) with dry sludges and goes down to approx. 65-75% for sludge containing 65% of Total Suspended Solids (TSS), i.e. a pulp similar to the thickened sludge available at the ILP Tranto plant.
Extraction yield was 50% with sludge containing 20% TSS, i.e. the one arising from clarifiers.

Following these results it was decided to feed the pilot plant with a 65% TSS pulp that provides a fairly good extraction yield, is easy to handle and fouls equipment to an acceptable degree.

Filtering tests showed that sludge has a good filtering behaviour either in vacuum or under pressure. Filtering behaviour improves when a polyelectrolyte (1.5 mg/g TSS) is added to the sludge.

The oil extraction tests on the pilot plant have put in evidence an oil extraction efficiency variable between 58 and 62%.

While performing trials, the biggest difficulty was to handle sludge and cleaning equipment between one test and the following since sludge would stick to the bottle and pipe walls.

Concerning the economic profitability of oil recovery process, oil content decreased from 20% to 5-8% in the last year. Therefore it can only be used as a lubricant of rolling mills and not as a base for high-performance lubricants having a higher added value.
The ILVA group, aware of the potential advantages of reusing oily sludges to recover the considerable quantities of raw materials and other valuable substances they contain for use within the steelworks production cycle, have accordingly instituted a research and experimental programme at the Taranto works.

In its present form, the pilot plant has provided useful information about the economics of the process. This aspect is seriously compromised by the high cost of the emulsifying agent employed. This agent, specifically formulated for this application, nevertheless proved to be the only one of those assessed that was capable of meeting the requirements.

So that the oily phase can also be exploited, it is proposed that this be extracted using solvents, with the oil subsequently being recovered by evaporation. Such an operation would make it possible to sell the oily fraction at the market price as recycled oil and to eliminate expenditure on the emulsifying agent (the key cost in the process as tested), thus rendering the plant profitable.

The plant produces mineral iron, obtained from filter presses, and recycled oil separated out into the fractions saleable on the market.

Dziedzina nauki (EuroSciVoc)

Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.

Projekt nie został jeszcze sklasyfikowany według klasyfikacji EuroSciVoc.
Wskaż dziedziny nauki, które twoim zdaniem są najbardziej istotne z punktu widzenia tego projektu i pomóż nam usprawnić naszą usługę klasyfikacji.

Aby użyć tej funkcji, musisz się zalogować lub zarejestrować

Program(-y)

Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.

Temat(-y)

Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.

Zaproszenie do składania wniosków

Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.

Brak dostępnych danych

System finansowania

Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.

Brak dostępnych danych

Koordynator

CENTRO SVILUPPO MATERIALI SPA
Wkład UE
Brak danych
Adres
Via di Castel Romano 100/102
00100 ROMA
Włochy

Zobacz na mapie

Koszt całkowity

Ogół kosztów poniesionych przez organizację w związku z uczestnictwem w projekcie. Obejmuje koszty bezpośrednie i pośrednie. Kwota stanowi część całkowitego budżetu projektu.

Brak danych
Moja broszura 0 0