Projektbeschreibung
Installation für die effiziente Prüfung von Flugzeugtechnologie
Die Entwicklung und Erprobung neuer Flugzeugtechnologien und -ausrüstungen ist von entscheidender Bedeutung für die Sicherheit und den Komfort der Flugreisenden und der Besatzung. Das derzeitige Prüfverfahren ist jedoch oft kompliziert und kostspielig, da die spezifischen Bedingungen genau simuliert werden müssen. Das EU-finanzierte Projekt HYDRO_RIG 3G zielt darauf ab, Flugzeugtests zu revolutionieren. Dazu wird eine innovative hydraulische Anlage entwickelt, welche die Flugzeugsysteme genau widerspiegelt. Diese Anlage wird sowohl Standardflugzeugsysteme als auch fortschrittliche Simulationsmöglichkeiten umfassen, die eine realistische Prüfung von Druckverlust, Volumen und anderen kritischen Effekten erlauben. Durch die Bereitstellung einer effizienteren und strafferen Testlösung wird das Projekt die Bewertung von Flugzeugausrüstungen erheblich verbessern, woraus höhere Sicherheit, geringere Kosten und höhere Gesamteffizienz in der Luftfahrtindustrie entstehen werden.
Ziel
"Clean Sky 2 aims to deliver full-scale in-flight demonstration of novel architectures and configurations. This ambitious goal implies the development of a huge number of innovative technologies and systems which must be properly tested on ground and in flight.
Indeed, in the certification of any aircraft device, the qualification tests are essential and mandatory as part of the Validation & Verification process. This tests will enable demonstrate that the related equipment is compatible with all Environmental and Performance conditions put on top of the development phase and conceived during the requirements definition.
Current trends in aeronautics lead to an increase in electrical systems, which must be combined with hydraulic ones, especially in critical aircraft control surfaces, as ailerons. Ensuring properly operation of both type of systems, stand-alone or integrated mode, is an essential step so developing test benchs fully representative of the A/C network will be a key issue.
Under this framework, the project HYDRO_RIG 3G has been conceived to develop an A/C representative hydraulic installation that integrates all the A/C hydraulic system equipment, considering hydraulic generation and distribution and the corresponding sensors representative of flight test instrumentation (FTI) in order to reproduce complete A/C conditions that will be present in the Regional FTB#2 Demonstrator regarding to the actuation of hybrid surfaces as ailerons. The system will be designed fully representative of A/C environment like volume, pressure loss, etc. For this, it will be necessary to simulate all components that integrate the system. FTI sensors will be installed with a wireless system. Commercial components to be used in the hydraulic system shall be fully representative of A/C environment like volume, pressure loss, etc. For this, it will be necessary to simulate all components that integrate the system.
"
Wissenschaftliches Gebiet
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringcontrol systems
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraft
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensors
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaeronautical engineering
- engineering and technologyelectrical engineering, electronic engineering, information engineeringinformation engineeringtelecommunicationsradio technology
Programm/Programme
Thema/Themen
Aufforderung zur Vorschlagseinreichung
Andere Projekte für diesen Aufruf anzeigenFinanzierungsplan
CS2-IA - Innovation actionKoordinator
23200 LA CAROLINA JAEN
Spanien