Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS

Innovative Al alloy For aircraft structural parts using Additive MAnufacturing technology

CORDIS oferuje możliwość skorzystania z odnośników do publicznie dostępnych publikacji i rezultatów projektów realizowanych w ramach programów ramowych HORYZONT.

Odnośniki do rezultatów i publikacji związanych z poszczególnymi projektami 7PR, a także odnośniki do niektórych konkretnych kategorii wyników, takich jak zbiory danych i oprogramowanie, są dynamicznie pobierane z systemu OpenAIRE .

Rezultaty

Plan for Dissemination and Exploitation of Results (PDER) (final version) (odnośnik otworzy się w nowym oknie)

Final version of the Plan for Dissemination and Exploitation of results. This final version, agreed within the consortium prior to the end of the project, will establish the rules for exploitation and dissemination, addressed to results and knowledge obtained at the end of the project, and therefore to results to be exploited and disseminated after the project.

AM process development for new Al Alloys (odnośnik otworzy się w nowym oknie)

This deliverable will explain the testing plan defined for the AM process development.

Final Public Report (odnośnik otworzy się w nowym oknie)

Publikacje

Development of high strength Al alloys processable by SLM for aeronautic application: analysis and comparative study (odnośnik otworzy się w nowym oknie)

Autorzy: Emma Gil, Mireia Vilanova, Aida Calvo, Maria San Sebastian
Opublikowane w: EURO PM2019 Proceedings, 2019
Wydawca: EPMA
DOI: 10.5281/zenodo.4836319

Design of aluminium alloys suitable for additivemanufacturing (odnośnik otworzy się w nowym oknie)

Autorzy: Carmen Cepeda-Jimenez, Arturo Martin1 Marcos Cejuela, Srdjan Milenkovic1, and Teresa Perez-Prado
Opublikowane w: THERMEC 2018, 2018
Wydawca: sciencesconf.org:thermec2018
DOI: 10.5281/zenodo.2679455

Laser Powder Bed Fusion of a Novel Cu-Modified AlSi10Mg Alloy: Processing, Microstructure, and Properties

Autorzy: Li, Guichuan ; Huang, Xiangqi ; Wei, Huiliang ; Liu, Tingting ; Vanmeensel, Kim
Opublikowane w: Euro PM2020, 2020, ISBN 978-1-899072-51-4
Wydawca: European Powder Metallurgy Association (EPMA)

Investigation of Solidification and Precipitation Behavior of Si-Modified 7075 Aluminum Alloy Fabricated by Laser-Based Powder Bed Fusion (odnośnik otworzy się w nowym oknie)

Autorzy: Guichuan Li, Suraj Dinkar Jadhav, Arturo Martín, Maria L. Montero-Sistiaga, Jeroen Soete, Maria San Sebastian, Carmen M. Cepeda-Jiménez, Kim Vanmeensel
Opublikowane w: Metallurgical and Materials Transactions A, Numer 52/1, 2021, Strona(/y) 194-210, ISSN 1073-5623
Wydawca: ASM International
DOI: 10.1007/s11661-020-06073-9

Dislocation-particle interactions in magnesium alloys (odnośnik otworzy się w nowym oknie)

Autorzy: C.Y. Wang, C.M. Cepeda-Jiménez, M.T. Pérez-Prado
Opublikowane w: Acta Materialia, Numer 194, 2020, Strona(/y) 190-206, ISSN 1359-6454
Wydawca: Elsevier BV
DOI: 10.1016/j.actamat.2020.04.055

Wyszukiwanie danych OpenAIRE...

Podczas wyszukiwania danych OpenAIRE wystąpił błąd

Brak wyników

Moja broszura 0 0