European Commission logo
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS

Turning industrial waste gases (mixed CO/CO2 streams) into intermediates for polyurethane plastics for rigid foams/building insulation and coatings

Rezultaty

Publikacje

Additive-Free Formic Acid Dehydrogenation Catalyzed by a Cobalt Complex

Autorzy: Nicolas Lentz, Alicia Aloisi, Pierre Thuéry, Emmanuel Nicolas, Thibault Cantat
Opublikowane w: Organometallics, Numer 40/5, 2021, Strona(/y) 565-569, ISSN 0276-7333
Wydawca: American Chemical Society
DOI: 10.1021/acs.organomet.0c00777

Minimizing CO 2 emissions with renewable energy: a comparative study of emerging technologies in the steel industry

Autorzy: Marian Flores-Granobles, Mark Saeys
Opublikowane w: Energy & Environmental Science, Numer 13/7, 2020, Strona(/y) 1923-1932, ISSN 1754-5692
Wydawca: Royal Society of Chemistry
DOI: 10.1039/d0ee00787k

The Social Acceptance Factors for Insulation Boards Produced With CO2-Derived Foam

Autorzy: Lisanne Simons , Martina Ziefle , Katrin Arning
Opublikowane w: Frontiers in Energy Research, Numer 9, 2021, ISSN 2296-598X
Wydawca: Frontiers
DOI: 10.3389/fenrg.2021.717975

What drives public acceptance of sustainable CO2-derived building materials? A conjoint-analysis of eco-benefits vs. health concerns

Autorzy: K. Arning, J. Offermann-van Heek, M. Ziefle
Opublikowane w: Renewable and Sustainable Energy Reviews, Numer 144, 2021, Strona(/y) 110873, ISSN 1364-0321
Wydawca: Elsevier BV
DOI: 10.1016/j.rser.2021.110873

Deriving Economic Potential and GHG Emissions of Steel Mill Gas for Chemical Industry

Autorzy: Jason Collis, Till Strunge, Bernhard Steubing, Arno Zimmermann, Reinhard Schomäcker
Opublikowane w: Frontiers in Energy Research, Numer 9, 2021, ISSN 2296-598X
Wydawca: Frontiers
DOI: 10.3389/fenrg.2021.642162

Upscaling methods used in ex ante life cycle assessment of emerging technologies: a review

Autorzy: Natalya Tsoy, Bernhard Steubing, Coen van der Giesen, Jeroen Guinée
Opublikowane w: The International Journal of Life Cycle Assessment, Numer 25/9, 2020, Strona(/y) 1680-1692, ISSN 0948-3349
Wydawca: Springer Verlag
DOI: 10.1007/s11367-020-01796-8

Catalytic challenges and strategies for the carbonylation of σ-bonds

Autorzy: Tawfiq Nasr Allah, Louise Ponsard, Emmanuel Nicolas, Thibault Cantat
Opublikowane w: Green Chemistry, Numer 23/2, 2021, Strona(/y) 723-739, ISSN 1463-9262
Wydawca: Royal Society of Chemistry
DOI: 10.1039/d0gc02343d

Coupling Electrocatalytic CO 2 Reduction with Thermocatalysis Enables the Formation of a Lactone Monomer

Autorzy: Louise Ponsard, Emmanuel Nicolas, Ngoc Huan Tran, Sarah Lamaison, David Wakerley, Thibault Cantat, Marc Fontecave
Opublikowane w: ChemSusChem, 2021, ISSN 1864-5631
Wydawca: Wiley - V C H Verlag GmbbH & Co.
DOI: 10.1002/cssc.202100459

Carbon4PUR Mapping Tool

Autorzy: Oliver Hurtig, Arturo Castillo, Andrei Barascu
Opublikowane w: 2019
Wydawca: self-published
DOI: 10.5281/zenodo.3465805

Prawa własności intelektualnej

METHOD FOR THE CARBONYLATION OF EPOXIDES

Numer wniosku/publikacji: 19 179686
Data: 2019-06-12

METHOD FOR PRODUCING A POLYESTER-POLYETHERPOLYOL BLOCK COPOLYMER

Numer wniosku/publikacji: 18 215182
Data: 2018-12-21

METHOD FOR MANUFACTURING POLYETHER ESTER POLYOLS

Numer wniosku/publikacji: 17 208405
Data: 2017-12-19

METHOD FOR PRODUCING A POLYESTER

Numer wniosku/publikacji: 18 215186
Data: 2018-12-21

PROCESS FOR PRODUCING POLYETHER CARBONATE POLYOLS

Numer wniosku/publikacji: 20 155288
Data: 2020-02-04

METHOD FOR PRODUCING AN ETHER ESTOL

Numer wniosku/publikacji: 20 165733
Data: 2020-03-25

PROCESS FOR PREPARING POLYETHER CARBONATE POLYOLS

Numer wniosku/publikacji: 19 192406
Data: 2019-08-19

PROCESS FOR PREPARING POLYETHER CARBONATE POLYOLS

Numer wniosku/publikacji: 19 192407
Data: 2019-08-19

Wyszukiwanie danych OpenAIRE...

Podczas wyszukiwania danych OpenAIRE wystąpił błąd

Brak wyników