Rezultaty
This deliverable corresponds to the validation of the model with the experimental data generated in Task 53
Coupling soot model with all turbulent combustion modelsThis deliverable corresponds to the efficient implementation of the soot model coupled to the different combustion models into the ITD leader code PRECISEUNS
Validated sectional soot modelThis deliverable is associated to assessment and validation of the Sectional method for soot modelling using the low TRL test rigs
Validated advanced methods of moments soot modelThis deliverable is associated to assessment and validation of the method of Moments for soot modelling using the low TRL test rigs
Comparison on chemistry/turbulence interaction modelsThis deliverable is associated to the examination of the impact of different chemistryturbulence interaction models on the prediction of soot on turbulent flames in low TRL test rigs
Plan on Communication, Dissemination and Exploitation of project resultsPlan on Communication, Dissemination and Exploitation of project results.
Chemical reaction mechanisms optimized for CFD applicationsThis deliverable includes a reduction mechanism that has been optimized with a feedback loop to be used efficiently in CFD calculations
Computational performance analysisThis deliverable will provide an analysis of the computational performance of the ITD leader code on some benchmark cases using the developed models.
Dissemination and Exploitation ReportTaking into account the results of the project and the models implemented this Deliverable will be focused on the expected Exploitation activities and agreements with the ITD leader feasible IPs or model registration and the Dissemination activities to be developed web site scientific publications
Report on the signature of the Consortia AgreementsThis deliverable will include the status of the signature of the Consortium Agreement and the Implementation Agreement.
Detailed reaction mechanism including PAH’s, and sootThis deliverable describes the full reaction mechanism including precursors, PAHs and soot for kerosene-like fuel surrogates under the condition of interest for the project.
Measurement data from turbulent counter-flow diffusion flamesThis deliverable is associated to the datasets generated for the turbulent counterflow diffusion flames at the atmospheric test rig
Measurement data from laminar counter-flow diffusion flamesThis deliverable is associated to the datasets generated for the laminar counterflow diffusion flames at the highpressure test rig
Measurement data from swirling flamesThis deliverable is associated to the datasets generated for the swirlstabilized combustor at the atmospheric test rig
Assessment of soot models on low TRL test rigs and aero engine combustorsThis deliverable is associated to assessment and validation of the different approaches for soot modelling using low TRL test rigs and realistic configurations of the aero engine combustor provided by the ITD leader
BSC will produce a video to disseminate the results of the Project.
The DMP will describe the life cycle for all data sets that will be collected, processed or generated by the research project. It is a document outlining how research data will be handled during a research project, and even after the project is completed, describing what data will be collected, processed or generated and following what methodology and standards, whether and how this data will be shared and/or made open, and how it will be curated and preserved. T
Publikacje
Autorzy:
Ambrus Both, Daniel Mira and Oriol Lehmkuhl
Opublikowane w:
International Journal of Heat and Mass Transfer, 2022, ISSN 0017-9310
Wydawca:
Pergamon Press Ltd.
DOI:
10.1016/j.ijheatmasstransfer.2022.122521
Autorzy:
Astrid Ramirez Hernandez, Trupti Kathrotia, Torsten Methling, Marina Braun-Unkhoff, Uwe Riedel
Opublikowane w:
J. Eng. Gas Turbines Power, Numer 07424795, 2022, ISSN 0742-4795
Wydawca:
American Society of Mechanical Engineers
DOI:
10.1115/1.4052206
Autorzy:
Abhijit Kalbhor and Jeroen van Oijen
Opublikowane w:
Combustion and Flame, 2022, ISSN 0010-2180
Wydawca:
Elsevier BV
DOI:
10.1016/j.combustflame.2022.112108
Autorzy:
Louis Dressler, Hendrik Nicolai, Senda Agrebi, Florian Ries and Amsini Sadiki
Opublikowane w:
Entropy, 2022, ISSN 1099-4300
Wydawca:
Multidisciplinary Digital Publishing Institute (MDPI)
DOI:
10.3390/e24050615
Autorzy:
Federica Ferraro; Carmela Russo; Robert Schmitz; Christian Hasse; Mariano Sirignano
Opublikowane w:
Fuel, Numer 2, 2021, ISSN 0016-2361
Wydawca:
Elsevier BV
DOI:
10.1016/j.fuel.2020.119353
Autorzy:
Federica Ferraro; Sandro Gierth; Steffen Salenbauch; Wang Han; Christian Hasse
Opublikowane w:
Crossref, Numer 10706631, 2022, ISSN 1070-6631
Wydawca:
American Institute of Physics
DOI:
10.1063/5.0098382
Autorzy:
Abhijit Kalbhor and Jeroen van Oijen
Opublikowane w:
Combustion and Flame, 2021, ISSN 0010-2180
Wydawca:
Elsevier BV
DOI:
10.1016/j.combustflame.2021.02.027
Autorzy:
Abhijit Kalbhor; Jeroen A. van Oijen
Opublikowane w:
International Journal of Hydrogen Energy, Numer 5, 2020, ISSN 0360-3199
Wydawca:
Pergamon Press Ltd.
DOI:
10.1016/j.ijhydene.2020.06.183
Autorzy:
Eduardo J. Pérez-Sánchez, Daniel Mira, Oriol Lehmkuhl and Guillaume Houzeaux
Opublikowane w:
10th European Combustion Meeting 2021, 2021
Wydawca:
The Combustion Institute
Autorzy:
Jose Maria García-Oliver, Jose Manuel Pastor, Ivan Olmeda, Ambrus Both and Daniel Mira
Opublikowane w:
XII National and III International Conference on Engineering Thermodynamics, 2022
Wydawca:
XII National and III International Conference on Engineering Thermodynamics
Autorzy:
Fabian P. Hagen, Petros Vlavakis, Malte Seitz, Thomas Klövekorn, Henning Bockhorn, Rainer Suntz, Dimosthenis Trimis
Opublikowane w:
39th International Symposium on Combustion, 2022
Wydawca:
Elsevier
DOI:
10.1016/j.proci.2022.07.253
Autorzy:
F. Ferraro S. Gierth, S. Salenbauch, W. Han and C. Hasse
Opublikowane w:
10th European Combustion Meeting, 2021
Wydawca:
The Combustion Institute
Autorzy:
Abhijit Kalbhor and Jeroen van Oijen
Opublikowane w:
10th European Combustion Meeting, 2021
Wydawca:
The Combustion Institute
Autorzy:
Raul Payri, Francisco Javier Salvador, Marcos Carreres and Carlos Moreno-Montagud
Opublikowane w:
ICLASS 2021, 2021
Wydawca:
ICLASS 2021
Autorzy:
M. Pollack; Federica Ferraro; Johannes Janicka; Christian Hasse
Opublikowane w:
Proceedings of the Combustion Institute, Numer 4, 2021
Wydawca:
The Combustion Institute
DOI:
10.1016/j.proci.2020.06.127
Autorzy:
Ömer H. Cokuslu, Christian Hasse, Klaus P. Geigle and Federica Ferraro
Opublikowane w:
AIAA SciTech Forum and Exposition, 2021
Wydawca:
American Institute of Aeronautics and Astronautics
Wyszukiwanie danych OpenAIRE...
Podczas wyszukiwania danych OpenAIRE wystąpił błąd
Brak wyników