CORDIS - Forschungsergebnisse der EU
CORDIS

Research into enhanced track and switch and crossing system 2

Leistungen

Tunnel and Bridge I2T2 report

Final summary report compiling major results, needs for further research in planned project and plan for implementation. Report will be divided into two parts Tunnels and Bridges. Each task above will have a dedicated chapter and subtask leaders will be responsible for reporting of associated work, results and next actions. For this deliverable, the GAP analysis of IN2TRACK will be included.This deliverable will also include:oReview of the existing load models for design and classification of bridges, will be done to some extent as new approach is likely to be developedoA proposal for dynamic load models which cover existing rolling stock depending on speed, axle load and axle arrangement or speed and line category according to EN 15528 5.5.3

Dissemination and exploitation plan for IN2TRACK2

Report defining the project dissemination communication and exploitation strategies including the events and conferences to be targeted for dissemination opportunities This deliverable will include a first report of task84 activities

Next generation track

Report to describe the research carried out into track design, installation, maintenance and monitoring of next generation track solutions. Recommendations will also be made for continuation of work into AWP20. The report will include a gap analysis of IN2TRACK results.

Integration Final Report

Report defining the final outcomes of the integrated demonstrators and possible route to market This will include a consolidation of outputs from WPs This deliverable will include the planning and implementation of demo plans

Enhancements to Switch and Crossing System Demonstrated

Final summary report compiled from major results and further research efforts necessary to complete WP1. The report will be structured according to the tasks in the WP, while each task leader and subtask leader will be responsible for contributing to the report. The report will reflect the indivisible nature of all necessary tasks to develop, install, operate and access a demonstrator, although they are divided in the WP for the reason of manageability. The report will include a gap analysis of IN2TRACK results

Next Generation Switches & Crossings

Deliverable D2.2 will present the detailed next generation switch and crossing technology developments and prototypes (virtual and physical) at component, sub-system and system level. Plans for delivering the final TD3.2 system demonstrator will also be presented alongside recommendations for further work within AWP20 [up to TRL6]. The report will include a gap analysis of IN2TRACK results.

Creation of communications materials to support the JU’s communications strategy

Communications and Marketing plan implementation and creation of materials to raise the profile of IN2TRACK2 and the SHIFT2RAIL JU which may include newsletters, presentations, social media accounts and videos.

Mid-term Integration Plan

Report summarising the mid-term system integration achievements, activity, relationships, demonstrators and further foreseen development. Plan to be produced to map how the integrated demonstrator will be delivered including interface with relevant Open Calls.

Dissemination and Exploitation activities

Report summarising the results/impacts of all the dissemination, communication and exploitation activities. This report will contain a complete summary of task 8.4 activities and achievements.

Veröffentlichungen

Ultra-Sensitive Affordable Cementitious Composite with High Mechanical and Microstructural Performances by Hybrid CNT/GNP

Autoren: Mohammadmahdi Abedi, Raul Fangueiro, António Gomes Correia
Veröffentlicht in: Materials, Ausgabe 13/16, 2020, Seite(n) 3484, ISSN 1996-1944
Herausgeber: MDPI Open Access Publishing
DOI: 10.3390/ma13163484

Experimental evaluation of cement mortars with recycled brass fibres from the electrical discharge machining process

Autoren: R. Borinaga-Treviño, A. Orbe, J. Canales, J. Norambuena-Contreras
Veröffentlicht in: Construction and Building Materials, Ausgabe 246, 2020, Seite(n) 118522, ISSN 0950-0618
Herausgeber: Elsevier BV
DOI: 10.1016/j.conbuildmat.2020.118522

Evaluation of CNT/GNP’s synergic effects on the Mechanical, Microstructural, and durability properties of a cementitious composite by the novel dispersion method

Autoren: Mohammadmahdi Abedi, Raul Fangueiro, Aires Camões, Antonio Gomes Correia
Veröffentlicht in: Construction and Building Materials, Ausgabe 260, 2020, Seite(n) 120486, ISSN 0950-0618
Herausgeber: Elsevier BV
DOI: 10.1016/j.conbuildmat.2020.120486

Approximating the influence coefficients of non-planar elastic solids for conformal contact analysis

Autoren: Julio Blanco-Lorenzo, Edwin A.H. Vollebregt, Javier Santamaria, Ernesto G. Vadillo
Veröffentlicht in: Tribology International, Ausgabe 154, 2021, Seite(n) 106671, ISSN 0301-679X
Herausgeber: Pergamon Press Ltd.
DOI: 10.1016/j.triboint.2020.106671

Thermal and mechanical properties of mortars reinforced with recycled brass fibres.

Autoren: Borinaga-Treviño, R., Orbe, A., Canales, J., Norambuena-Contreras, J.
Veröffentlicht in: Construction and Building Materials, Ausgabe 284, 2021, ISSN 0950-0618
Herausgeber: Elsevier BV
DOI: 10.1016/j.conbuildmat.2021.122832

Evaluation of mixed-mode crack growth direction criteria under rolling contact conditions

Autoren: Dimosthenis Floros, Anders Ekberg, Fredrik Larsson
Veröffentlicht in: Wear, Ausgabe 448-449, 2020, Seite(n) 203184, ISSN 0043-1648
Herausgeber: Elsevier BV
DOI: 10.1016/j.wear.2020.203184

Influence of track foundation on the performance of ballast and concrete slab tracks under cyclic loading: Physical modelling and numerical model calibration

Autoren: A. Ramos, A. Gomes Correia, R. Calçada, P. Alves Costa, A. Esen, P.K. Woodward, D.P. Connolly, O. Laghrouche
Veröffentlicht in: Construction and Building Materials, Ausgabe 277, 2021, Seite(n) 122245, ISSN 0950-0618
Herausgeber: Elsevier BV
DOI: 10.1016/j.conbuildmat.2021.122245

An Effective Method for Hybrid CNT/GNP Dispersion and Its Effects on the Mechanical, Microstructural, Thermal, and Electrical Properties of Multifunctional Cementitious Composites

Autoren: Mohammadmahdi Abedi, Raul Fangueiro, Antonio Gomes Correia
Veröffentlicht in: Journal of Nanomaterials, Ausgabe 2020, 2020, Seite(n) 1-20, ISSN 1687-4110
Herausgeber: Hindawi Publishing Corporation
DOI: 10.1155/2020/6749150

Lime mud waste from the paper industry as a partial replacement of cement in mortars used on radiant floor heating systems.

Autoren: Borinaga- Treviño, R., Cuadrado, J., Canales, J., Rojí, E.
Veröffentlicht in: Journal of Building Engineering, Ausgabe 41, 2021, ISSN 2352-7102
Herausgeber: Elsevier
DOI: 10.1016/j.jobe.2021.102408

Numerical and Experimental Evaluation of a CFRP Fatigue Strengthening for Stringer-Floor Beam Connections in a 19th Century Riveted Railway Bridge

Autoren: J. David Jimenez-Vicaria, M. Dolores Gomez-Pulido, Daniel Castro-Fresno
Veröffentlicht in: Metals, Ausgabe 11/4, 2021, Seite(n) 603, ISSN 2075-4701
Herausgeber: MDPI
DOI: 10.3390/met11040603

Simulation of wheel–rail impact load and sleeper–ballast contact pressure in railway crossings using a Green's function approach

Autoren: X. Li, J.C.O. Nielsen, P.T. Torstensson
Veröffentlicht in: Journal of Sound and Vibration, Ausgabe 463, 2019, Seite(n) 114949, ISSN 0022-460X
Herausgeber: Academic Press
DOI: 10.1016/j.jsv.2019.114949

Geotechnical and piezoresistivity properties of sustainable cementitious stabilized sand reinforced with recycled fibres.

Autoren: Abedi, M., Gomes Correia, A., Fangueiro, R.
Veröffentlicht in: Transportation Engineering, Ausgabe 6, 2021, ISSN 2666-691X
Herausgeber: Elsevier
DOI: 10.1016/j.treng.2021.100096

Anisotropic yield surfaces after large shear deformations in pearlitic steel

Autoren: Knut Andreas Meyer, Magnus Ekh, Johan Ahlström
Veröffentlicht in: European Journal of Mechanics - A/Solids, Ausgabe 82, 2020, Seite(n) 103977, ISSN 0997-7538
Herausgeber: Elsevier BV
DOI: 10.1016/j.euromechsol.2020.103977

Modeling and experimental characterization of large biaxial strains and induced anisotropy in pearlitic rail steel

Autoren: Meyer, Knut Andreas
Veröffentlicht in: Modeling and experimental characterization of large biaxial strains and induced anisotropy in pearlitic rail steel, Ausgabe 3, 2019
Herausgeber: Chalmers University of Technology

Análise probabilística da segurança de circulação de comboios de alta velocidade em pontes ferroviárias de pequeno vão

Autoren: José Miguel Coelho Gonçalves
Veröffentlicht in: Análise probabilística da segurança de circulação de comboios de alta velocidade em pontes ferroviárias de pequeno vão, Ausgabe 1, 2020
Herausgeber: FACULDADE DE ENGENHARIA DA UNIVERSIDADE DO PORTO

Avaliação do comportamento à fadiga de uma ponte ferroviária metálica

Autoren: Pedro Miguel Pereira Martins
Veröffentlicht in: Avaliação do comportamento à fadiga de uma ponte ferroviária metálica, Ausgabe 1, 2020
Herausgeber: MESTRADO INTEGRADO EM ENGENHARIA CIVIL

Wheel–Rail Impact Loads and Track Settlement in Railway Crossings

Autoren: Li, Xin
Veröffentlicht in: Wheel–Rail Impact Loads and Track Settlement in Railway Crossings, Ausgabe 1, 2019
Herausgeber: Chalmers University of Technology

Modelling the acoustic performance of slab tracks

Autoren: Theyssen, Jannik
Veröffentlicht in: Modelling the acoustic performance of slab tracks, Ausgabe 1, 2020
Herausgeber: Chalmers University of Technology

Application of microwave and induction heating on fibre-reinforced cementitious materials for the demolition of structures

Autoren: Roque Borinaga Treviño, Aimar Orbe, Javier Canales, Jesus Cuadrado, Jose Norambuena-Contreras
Veröffentlicht in: Proceedings 17th International Conference on Microwave and High Frequency Heating, 2019, ISBN 9788490487198
Herausgeber: Universitat Politècnica de València
DOI: 10.4995/ampere2019.2019.9776

THE EFFECTS OF MODEL ASSUMPTIONS ON THE DYNAMIC IMPEDANCE FUNCTIONS OF A SHALLOW FOUNDATION

Autoren: Johan Lind Östlund1,2, Andreas Andersson1,3, Mahir Ülker-Kaustell1,2, and Jean-Marc Battini1
Veröffentlicht in: THE EFFECTS OF MODEL ASSUMPTIONS ON THE DYNAMIC IMPEDANCE FUNCTIONS OF A SHALLOW FOUNDATION, 2020
Herausgeber: EASD
DOI: 10.47964/1120.9235.19373

DYNAMIC EFFECT OF TRAINS WITH ARTICULATED COACHESAND JACOBS BOGIES WITH INTEGER WHEELBASE RATIOS

Autoren: Pedro Museros1, Andreas Andersson2, and Raid Karoumi2
Veröffentlicht in: 2020
Herausgeber: EASD
DOI: 10.47964/1120.9217.20270

DYNAMIC RESPONSE OF CORRUGATED STEEL CULVERTS FOR RAILWAY LINES

Autoren: A. Andersson1 and R. Karoumi
Veröffentlicht in: DYNAMIC RESPONSE OF CORRUGATED STEEL CULVERTS FOR RAILWAY LINES, 2020
Herausgeber: EASD
DOI: 10.47964/1120.9130.18747

Suche nach OpenAIRE-Daten ...

Bei der Suche nach OpenAIRE-Daten ist ein Fehler aufgetreten

Es liegen keine Ergebnisse vor