Rezultaty
Specifications for the datasets, corrosion models, weather condition models, diagnosis, prognosis, decision support and fault tolerant control that are employed and/or developed in WP3 and WP4 will be defined. Six groups of specifications are considered: Features to be measured; Influent collateral inputs; Application related specifications; Integration/Deployment of algorithms; Fault tolerant control; Data management.
Corrosion models definition and validationD31 will report a public PU versin of the definition of corrosion and coating degradation models relevant for the environmental conditions and material under study Coating degradation and corrosion will be described as a function of time
Decision Support System as CBM tool for WT structuresD34 will report the main features and characteristics of the Decision Support System DSS Software as ConditionBased monitoring tool for WT structures and will also report the validation of this new DSS at simulation level
Corrosion testing in fieldSamples of structural steel with and without protective coating systems will be prepared and exposed at real environmental conditions producing corrosion that will be measured to specify corrosion phenomena. It will be the result of subtask 1.3.2.
Integration and test of the monitoring design, communications and mobile platformD25 will report the results of the integration of the components developed in tasks T21 T22 and T23 It will include The integration and test of the dronebased platform blocks the integration and test of the second solution of the monitoring system with the communications module the integration and test of the first solution of the monitoring system with the communications module the integration of the monitoring system including communications with the dronebased mobile platformThe frequency bandwidth of the ultrasound smart sensor will be in the range of 100 200 kHz and the sensor will have a frequency in the range of 5 10 MHzThe monitoring platform is expected to have a weight of maximum 500 gramsThe communication platform will achieve an effective range of around 80 meters and support a maximum data rate of 250 kbps
Fault Tolerant Wind Turbine ControlD35 will report a review on the developed algorithms and software components whose goal is to control individual wind turbines in a fault tolerant way In particular both faults at individual wind turbine components levels and the turbine structural health status based on corrosion measurements and predictions will be considered
Design specifications for stochastic WF control including optimal O&MThe output will be a set of design specifications for the WF controller, including: Definition of the baseline control and O&M architectures; Effectiveness of the controller in use cases and scenarios; Concept study of mitigating control strategies.
Results of the replicability and transferability analysis in the ocean sectorD56 will report the analysis of the replicability and transferability of WATEREYE knowledge technologies and results studying their appliance in several of the other sectors of offshore energy such as wave energy tidal energy ocean thermal energy and other potential ocean applications
Services for data acquisition, storage and accessD3.3 will report the definition of the infrastructure to store the data required by downstream application: wall thickness, historical data from other wind turbines, environmental conditions, wind turbine operation conditions. SWC will also develop and deploy a semantic layer on top of the database to facilitate access to data by prognosis and diagnosis tools and decision support system.
EEAB establishment, members, roles and planningReport showing final composition of EEAB members, roles and planning with meetings schedule and templates/lists for useful information exchange for the project.
Optimal WF control algorithms based on state of corrosion and maintenance constraintsD43 will report a review on optimal wind farm controlalgorithms based on state of corrosion and on maintenance constraints including WF modelling and simulation Optimal WF control including maintenance and load constraints and also including the results of a testcase simulation analysis
Smart corrosion sensors &communications specificationsDetailed specification of the smart corrosion sensors and communications platform. It will be the result of subtask 1.3.1.
Weather and Operation Forecast toolD3.6 will report a public (PU) versión of the main characteristics of the weather and operation forecast tool developed from the Weather Research and Forecast model coupled with the WT simulation package FAST to generate forecast data both starting from actual conditions, and also from relevant extreme conditions in order to analyse different what-if scenarios.
WATEREYE Monitoring validation in relevant environmentD54 will show at report and demonstration level how the prototype of monitoring solution is installed and proved in relevant environment in the PLOCAN facilities It will include the implementation of a prototype including a matrix of fixed sensors and 1 mobile smart sensor as well as the prototype of the mobile platform and docking station D54 will show the physical prototypes and the report of the analysis of the monitoring of corrosion phenomenaA wall thickness degradation rate detection of as low 114 228 nmh is expected
WATEREYE Monitoring HW (WP2) & SW (WP3) integration & validation at lab scaleD52 will report the integration validation at lab scale of the monitoring HW and SW The report will include proves and analysis of interface between the integrated monitoring platform communications and mobile platform developed in T25 with the data management tool CEIT DD SWC study the effect of micromotion of the mobile platform on the measured wall thicknessdamage features FMAKE CEIT DD interface between the data management tool and the OM software tools developed in WP3 and to integrate them into a main server FMAKE SWC validation the proofofconcept of the monitoring systemA wall thickness degradation rate detection of as low 114 228 nmh is expected
Mobile platform SWAP, IPS, Preliminary design and ICDSize, Weight and Power (SWaP) budget and distribution will be defined for the whole mobile platform systems (Mobile platform; Power; Navigation sensors; Corrosion sensors and communication module; Corrosion sensor placement system; Mounting)
WF controller including maintenance scheduling based on corrosion predictionsD44 will report the result of the final Wind Farm controller solution including the definition of feasible operation and maintenance options and estimation of costs for maintenance activities and also including a model for Cooptimization of control and maintenance strategy
Real-time probabilistic analysis of WFsThis deliverable will show adhoc developed methods for realtime probabilistic analysis of wind power plant operation integrating structural health diagnosis and prognosis ie the state of corrosion
Use cases and scenarios definitionThis deliverable will describe the checklist for conditions affecting corrosion in real environment and will define main general (non-detailed) specifications of: smart sensors; communications; mobile-platform operating conditions; diagnostics and visualization tools; functionalities of the diagnostic, prognostics and decision support tools; WT and WF control algorithms main outputs and use cases for the WF controller.
Integration & Validation planDetailed integration and validation plan with deep emphasis on the timeschedule and missions needed to carry out the integration and validation tasks in the physical offshore facilities of PLOCAN of the expected outputs US smart corrosion sensors Communications Mobileplatform Corrosion models Services for sensor data acquisition storage and access Wall thickness lossdefect features visualization tool Decision Support System DSS as CBM tool for WT structures Fault Tolerant WT Control WF Probabilistic analysis tool WF control algorithms based on state of corrosion and maintenance constraints WF controller with OM scheduling based on corrosion predictions
Final compilation of articles newsletters flyers posters brochures videos etc for project diffusion
WATEREYE Initial dissemination workshop/eventInitial dissemination workshop/event: To show initial results, and organized by CEIT in M18.
WATEREYE Final dissemination workshop/eventFinal dissemination workshopevent To show final results and organized by PLOCAN in M36 It will be possible to show the results in the facilities where the project will be validated in relevant environment
2nd version of Dissemination materialSecond version of compilation of articles, newsletters, flyers, posters, brochures, videos, etc, for project diffusion.
Dissemination materialFirst definition of articles, newsletters, flyers, posters, brochures, videos, etc, for project diffusion. This deliverable will be delivered by M6 and updated in M18 and in M36.
Project web-site1 project website will be deployed and ready to be used as main dissemination tool.
DynamicLink Library DLL as probabilistic analysis tool of statespace at wind farm level The probabilistic analysis tool will be delivered in a modular and portable DLL Dynamiclink library format such that it can be easily linked with other codes
WATEREYE WF control tools integrationD5.3 will include SW solution of the Wind Farm control tools integration. It includes: Set-up of wind farm simulator and Integration/transferability analysis of WATEREYE WF management tools (The analysis will emphasize the retrofitting of existing wind turbines and wind farm management systems but also cover novel system developments).
Publikacje
Autorzy:
Upeksha Chathurani Thibbotuwa ,Ainhoa Cortés , Andoni Irizar
Opublikowane w:
Applied Sciences, Numer 20763417, 2022, ISSN 2076-3417
Wydawca:
Multidisciplinary Digital Publishing Institute (MDPI)
DOI:
10.3390/app12020808
Autorzy:
Joachim Verhelst, Inge Coudron, Agusmian P. Ompusunggu
Opublikowane w:
MDPI Applied Sciences, Numer 20763417, 2022, ISSN 2076-3417
Wydawca:
MDPI
DOI:
10.3390/app12031762
Autorzy:
Barber, Sarah and Lima, Luiz Andre Moyses and Sakagami, Yoshiaki and Quick, Julian and Latiffianti, Effi and Liu, Yichao and Ferrari, Riccardo and Letzgus, Simon and Zhang, Xujie and Hammer, Florian
Opublikowane w:
Energies, Numer 19961073, 2022, Strona(/y) 5638, ISSN 1996-1073
Wydawca:
Multidisciplinary Digital Publishing Institute (MDPI)
DOI:
10.3390/en15155638
Autorzy:
Upeksha Chathurani Thibbotuwa ,Ainhoa Cortés and Andoni Irizar
Opublikowane w:
Sensors, Numer 14248220, 2022, ISSN 1424-8220
Wydawca:
Multidisciplinary Digital Publishing Institute (MDPI)
DOI:
10.3390/s22218451
Autorzy:
R.Brijder, C. H M Hagen, A. Cortés, A. Irizar, U. Chathurani Thibbotuwa, S. Helsen, S. Vásquez, A. Partogi Ompusunggu
Opublikowane w:
Frontiers, Numer 22973362, 2022, ISSN 2297-3362
Wydawca:
Frontiers in Energy Research
DOI:
10.3389/fenrg.2022.991343
Autorzy:
Aitor Guisasola ,Ainhoa Cortés ,Javier Cejudo ,Astrid da Silva ,Markos Losada and Paul Bustamante
Opublikowane w:
Electronics, Numer 20799292, 2022, ISSN 2079-9292
Wydawca:
Multidisciplinary Digital Publishing Institute (MDPI)
DOI:
10.3390/electronics11040570
Autorzy:
Jean Gonzalez Silva, Riccardo Ferrari, Jan-Willem van Wingerden
Opublikowane w:
Renewable Energy, 2023, ISSN 0960-1481
Wydawca:
Pergamon Press Ltd.
DOI:
10.1016/j.renene.2022.11.113
Autorzy:
Sandra Vásquez, Joachim Verhelst, Robert Brijder and Agusmian Partogi Ompusunggu
Opublikowane w:
MDPI Wind, Numer 2674032X, 2022, ISSN 2674-032X
Wydawca:
MDPI
DOI:
10.3390/wind2040039
Autorzy:
Gonzales-Silva, Jean and Ferrari, Riccardo M.G. and van Wingerden, Jan-Willem
Opublikowane w:
Conference on Decision and Control, 2022
Wydawca:
IEEE
DOI:
10.48550/arxiv.2209.11087
Autorzy:
Gonzales-Silva, Jean and van der Hoek, Daan and Mulders, Sebastiaan P. and Ferrari, Riccardo M.G. and van Wingerden, Jan-Willem
Opublikowane w:
American Control Conference, 2022
Wydawca:
IEEE
DOI:
10.48550/arxiv.2204.05413
Autorzy:
Gonzales-Silva, Jean and Doekemeijer, Bart Matthijs and Ferrari, Riccardo M.G. and van Wingerden, Jan-Willem
Opublikowane w:
Science of Making Torque from Wind Conference, 2022
Wydawca:
IOP Publishing
DOI:
10.1088/1742-6596/2265/2/022056
Autorzy:
Håkon Toftaker, Espen Flo Bødal, Iver Bakken Sperstad
Opublikowane w:
Journal of Physics: Conference Series, Numer 17426596, 2022, ISSN 1742-6596
Wydawca:
IOP Publishing
DOI:
10.1088/1742-6596/2362/1/012041
Autorzy:
Feng, Zhixin and Gallo, Alexander J. and Liu, Yichao and Pamososuryo, Atindriyo Kusumo and Ferrari, Riccardo M.G. and van Wingerden, Jan-Willem
Opublikowane w:
Conference on Decision and Control, 2022
Wydawca:
IEEE
DOI:
10.48550/arxiv.2209.14848
Autorzy:
Feng, Zhixin and Ferrari, Riccardo M.G. and van Wingerden, Jan-Willem and Liu, Yichao
Opublikowane w:
Trends in Renewable Energies Offshore: Proceedings of the 5th International Conference on Renewable Energies Offshore (RENEW 2022, Lisbon, Portugal, 8--10 November 2022), 2022
Wydawca:
CRC Press
DOI:
10.48550/arxiv.2211.00689
Autorzy:
Jean Gonzalez Silva; Bart Doekemeijer; Riccardo Ferrari; Jan-Willem van Wingerden
Opublikowane w:
European Control Conference (ECC), 2021
Wydawca:
IEEE
DOI:
10.23919/ecc54610.2021.9655154
Autorzy:
Robert Brijder, Stijn Helsen, Agusmian Partogi Ompusunggu
Opublikowane w:
Proceedings of the Thirteenth International Workshop on Structural Health Monitoring Stanford University, 2022, ISBN 978-1-60595-687-9
Wydawca:
Structural Health Monitoring (IWSHM)
DOI:
10.12783/shm2021/36288
Autorzy:
Agusmian Partogi Ompusunggu, Inge Coudron, Jia Wan
Opublikowane w:
Proceedings of the WESC2021 Conference Book, 2021, Strona(/y) 36-37
Wydawca:
WESC2021
Wyszukiwanie danych OpenAIRE...
Podczas wyszukiwania danych OpenAIRE wystąpił błąd
Brak wyników