CORDIS oferuje możliwość skorzystania z odnośników do publicznie dostępnych publikacji i rezultatów projektów realizowanych w ramach programów ramowych HORYZONT.
Odnośniki do rezultatów i publikacji związanych z poszczególnymi projektami 7PR, a także odnośniki do niektórych konkretnych kategorii wyników, takich jak zbiory danych i oprogramowanie, są dynamicznie pobierane z systemu OpenAIRE .
Rezultaty
Report on modelling methods used to predict FT results of mini-CT specimen before/after high fluence irradiation (odnośnik otworzy się w nowym oknie)
A report on modelling methods used to predict FT results of mini-CT specimen before/after high fluence irradiation
A report on master curve testing results of Charpy and half-thick Charpy specimens from LYRA-10 (odnośnik otworzy się w nowym oknie)Full characterization of the irradiated microstructure (odnośnik otworzy się w nowym oknie)
2nd Newsletter (odnośnik otworzy się w nowym oknie)
4th Newsletter (odnośnik otworzy się w nowym oknie)
Evaluation of consistency of test results from Lyra-10 irradiation with existing ETE for tested materials (VVER-1000 welds and PWR steels) and their possible extension beyond 60 years of operation (odnośnik otworzy się w nowym oknie)
1st Newsletter (odnośnik otworzy się w nowym oknie)
Correlation with mechanical properties and identification of synergetic effects of Ni, Mn and Si (odnośnik otworzy się w nowym oknie)
Report on results obtained from supplementary tests. (odnośnik otworzy się w nowym oknie)
Final report on small specimen results including best practices and lessons learned from small specimen technique (odnośnik otworzy się w nowym oknie)
Final report on WP6 activities (odnośnik otworzy się w nowym oknie)
A report on influence of high fluence irradiation on tensile properties of RPV steels and effectiveness of annealing in PWR and VVER 1000 steels (odnośnik otworzy się w nowym oknie)
Full characterization of the initial microstructure (odnośnik otworzy się w nowym oknie)
Report on determined lower boundary fracture toughness curve for high-fluence materials (odnośnik otworzy się w nowym oknie)
Report on the state-of-the-art on existing ETEs (odnośnik otworzy się w nowym oknie)
Report on factors affecting fracture toughness at high fluences and selection of suitable materials/methods for analysis of high-fluence materials (odnośnik otworzy się w nowym oknie)
Applicability of existing ETE to embrittlement results in LYRA-10 (odnośnik otworzy się w nowym oknie)
Report on the analysis showing the correlation between conventional TK shifts from Charpy testing and T0 values from sub-size specimens (odnośnik otworzy się w nowym oknie)
A report on the analysis showing the correlation between conventional TK shifts from Charpy testing and T0 values from sub-size specimens
Report on dissemination WSs (final one) (odnośnik otworzy się w nowym oknie)Report on the state-of-the-art of small specimen use (odnośnik otworzy się w nowym oknie)
Report on summer school holding (odnośnik otworzy się w nowym oknie)
Report on results obtained from SPT specimens (odnośnik otworzy się w nowym oknie)
3rd Newsletter (odnośnik otworzy się w nowym oknie)
Evaluation of MC suitability for high-fluence miniature specimens (odnośnik otworzy się w nowym oknie)
Publikacje
Autorzy:
Laot, M., Naziris, F., Bakker, T., D'Agata, E., Martin, O., Kolluri, M.
Opublikowane w:
Metals, Numer vol. 904, no. 6, 2022, Strona(/y) p.12, ISSN 1996-1944
Wydawca:
MDPI Open Access Publishing
DOI:
10.3390/met12060904
Autorzy:
Welschen, R., Naziris, F., Pierick, P. t., Kolluri, M.
Opublikowane w:
Materials Performance and Characterization, Numer vol. 11, no. 3, 2022., 2022, ISSN 2165-3992
Wydawca:
ASTM
DOI:
10.1520/mpc20210113
Autorzy:
Mathilde Laot, Viviam Marques Pereira, Theo Bakker, Elio d’Agata, Oliver Martin, Murthy Kolluri
Opublikowane w:
Metals, Numer 14, 2024, Strona(/y) 887, ISSN 2075-4701
Wydawca:
Metals
DOI:
10.3390/met14080887
Autorzy:
Vladimir Krsjak, Stanislav Sojak, Martin Petriska, Branislav Stribrnsky, Robert Hinca, Matus Huska, Vladimir Slugen, Murthy Kolluri, Oliver Martin, Jarmila Degmova
Opublikowane w:
Journal of Nuclear Materials, Numer Volume 584, 2023., 2023, ISSN 0022-3115
Wydawca:
Elsevier BV
DOI:
10.1016/j.jnucmat.2023.154563
Autorzy:
Shugailo, O., Kolluri, M., Gillemot, F., Ulbricht, U., & Brumovsky, M.
Opublikowane w:
Nuclear and Radiation Safety, Numer March № 1(97) (2023), 2023, ISSN 2073-6231
Wydawca:
Odessa National Polytechnic Institute, Nuclear physics and energy
DOI:
10.32918/nrs.2023.1(97).05
Autorzy:
Ulbricht A, Dykas J, Chekhonin P, Altstadt E and Bergner F
Opublikowane w:
Frontiers in Nuclear Engineering, Numer Volume 2 - 2023, 2023, ISSN 2813-3412
Wydawca:
Frontiers Media S.A.
DOI:
10.3389/fnuen.2023.1176288
Autorzy:
M. Kolluri, O. Martin, F. Naziris, E. D'Agata, F. Gillemot, M. Brumovsky, A. Ulbricht, J-M. Autio, O. Shugailo, A. Horvath
Opublikowane w:
Nuclear Engineering and Design, Numer Volume 406, 2023, 112236, 2023, ISSN 0029-5493
Wydawca:
Elsevier BV
DOI:
10.1016/j.nucengdes.2023.112236
Wyszukiwanie danych OpenAIRE...
Podczas wyszukiwania danych OpenAIRE wystąpił błąd
Brak wyników