REGIONAL AIRCRAFT 2020-2023

Rezultaty

REG IADP Dissemination, Communication and Exploitation Plans for 2020 (linked to D0.5-01)
Coordination Memo: Delivery of Engine Data Set Loop 3 (Linked to KO_1.1.2-06)

Coordination Memo Delivery of Engine Data Set Loop 3 Linked to KO11206

Coordination Memo releasing permit to fly documentation (STEP 1) for structural components (Aileron and Spoiler) (Linked to KO_3.5.1-01)
REG IADP Dissemination, Communication and Exploitation Plans for 2023 (Linked to D0.5-05)

REG IADP Dissemination Communication and Exploitation Plans for 2023 Linked to D0505

REG IADP risks management plan 2020 (linked to D0.3-01 )
REG IADP Dissemination, Communication and Exploitation Plans for 2021 (linked to D0.5-03)

REG IADP Dissemination Communication and Exploitation Plans for 2021 linked to D0503

Coordination Memo delivering REG LCI Second Update to ECO TA (FhG) (Linked to KO_4.2-02)
REG IADP risks management plan 2022 (linked to D0.3-03 )

REG IADP risks management plan 2022 linked to D0303

REG IADP Dissemination, Communication and Exploitation Plans for 2022 (Linked to D0.5-05)

REG IADP Dissemination Communication and Exploitation Plans for 2022 Linked to D0505

REG IADP risks management plan 2021 (linked to D0.3-02)

REG IADP risks management plan 2021 linked to D0302

Coordination Memo delivering Noise model adapted for innovative propellers in Regional Multimission a/c (linked to KO_1.2.1-1)

Publikacje

Hybrid Aircraft Design Tool and Applications to Regional Turboprop”,

Autorzy: F. Orefice, F. Nicolosi, D. Ciliberti
Opublikowane w: electric & hybrid aerospace Technology (Virtual Conference),, 2021
Wydawca: electric & hybrid aerospace Technology

Tolerance allocation: A reliability based optimisation approach

Autorzy: Konstatinos Bacharoudis, Atanas Popov, Svetan Ratchev
Opublikowane w: Procedia Manufacturing, Numer 51, 2020, Strona(/y) 1038-1045, ISSN 2351-9789
Wydawca: UNOTT
DOI: 10.1016/j.promfg.2020.10.146

Integrated design approaches for an innovative multifunctional flap architecture based on distributed electromechanical actuation

Autorzy: Rosario Pecora
Opublikowane w: AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum 2022, Numer Proceedings of the AIAA SciTech Forum 2022 held in San Diego (CA, SA) on January 3-7, 2022, 2022, Strona(/y) Paper ID: 270339
Wydawca: AIAA - American Institute of Aeronautics and Astronautics
DOI: 10.2514/6.2022-0719

Aerodynamic optimization of morphing flaps: numerical and experimental techniques

Autorzy: S. de Lucas AIRBUS DS
Opublikowane w: The role of Airbus DS in the leadership of the Regional Multimission demonstrator of Clean Sky 2, 2020
Wydawca: ONLINE

Clean Sky 2 - REG IADP Overview and links with AIR ITD

Autorzy: V. Ascione, V. Perrupato, R. Valiante – Leonardo.
Opublikowane w: 10th EASN Virtual International Conference, 2020
Wydawca: EASN

“Design and Preliminary Performance Assessment of a PHM System for Electro-Mechanical Flight Control Actuators”

Autorzy: prof. Andrea De Martin, prof. Giovanni Jacazio, prof. Massimo Sorli and Antonio Bertolino
Opublikowane w: 2022
Wydawca: EASN

An Overview of the AG2 Project: Latest Achievements

Autorzy: Ameduri S, Amoroso F, Carossa GM, Concilio A, Dimino I, Giuliani M, Mercurio U, Pecora R, Pellone L, Ricci S and Romano F.
Opublikowane w: 2022
Wydawca: AIAA SCITECH

Regional Multi Mission Aircraft in Clean Sky 2: Technologies and Demonstration

Autorzy: Luis Benítez Montañés
Opublikowane w: AIAA, Jan 14th – 15th 2021, Open Teleconference SCITECH 2021 Clean Sky Special Sessions. Clean Sky Special Session, 2021
Wydawca: CS2

Design and optimization of a large turboprop aircraft

Autorzy: Nicolosi, F., Corcione, S., Trifari, V., De Marco, A.,
Opublikowane w: AEROSPACE (MDPI Journal) AerospaceOpen AccessVolume 8, Numer 5May 2021 Article number 132, Numer AEROSPACE (MDPI Journal) AerospaceOpen AccessVolume 8, Numer 5May 2021 Article number 132, 2021
Wydawca: AEROSPACE (MDPI Journal)
DOI: 10.3390/aerospace8050132

"Multibody dynamic model of a double nut preloaded ball screw mechanism with lubrication"" Paper accepted at the ASME 2020 International Mechanical Engineering Congress and Exposition IMECE2020; November 15-18, 2020, Portland, OR, USA - Conference will be held on-line"

Autorzy: A. Bertolino, S. Mauro, G. Jacazio, M. Sorli
Opublikowane w: ASME 2020 International Mechanical Engineering Congress and Exposition IMECE2020, 2020
Wydawca: ASME

Design and Testing of a Droop Nose Morphing for Advanced Regional Aircraft: Numerical and Experimental Validation

Autorzy: De Gaspari, A., Cavalieri, V. and Ricci, S.
Opublikowane w: 2022
Wydawca: AIAA SCITECH

PHM for electro-mechanical flight control systems in the context of Integrated Vehicle Health Management

Autorzy: Andrea De Martin, Giovanni Jacazio and Massimo Sorli
Opublikowane w: EASN, 2019
Wydawca: EDP

Comparison of Aircraft Loads Using URANS and Actuator Disk Modelling of Propellers

Autorzy: Christopher Wales, Dorian Jones, Ann Gaitonde, Peter Risley-Settle and Andrew Peace
Opublikowane w: 2022
Wydawca: AIAA
DOI: 10.2514/6.2022-3684

Multidisciplinary Design of a Low-Noise Propeller: Part II — Efficient Aero-Acoustic-Mechanical Design Methodology Exploiting Surrogate Models in an Adaptive Design Space

Autorzy: Lieven Baert, Chloé Dumont, Charlotte Beauthier, Caroline Sainvitu, Ingrid Lepot, Julien Blanchard
Opublikowane w: Volume 2D: Turbomachinery, 2020, ISBN 978-0-7918-8409-6
Wydawca: American Society of Mechanical Engineers
DOI: 10.1115/gt2020-15847

Wind tunnel tests of a three-lifting surface regional aircraft

Autorzy: V. Cusati, S. Corcione, F. Nicolosi, D. Ciliberti
Opublikowane w: Chinese Journal of Aeronautics, 2021
Wydawca: Chinese Journal of Aeronautics

Hybridization and Mission Analysis of ATR-42

Autorzy: F. Orefice, F. Nicolosi, S. Corcione, P. Della Vecchia, D. Ciliberti, M. Ruocco
Opublikowane w: AIAA AVIATION 2021 FORUM, August 2-6, 2021., 2021
Wydawca: AIAA

Multidisciplinary Design of a Low-Noise Propeller: Part I — Multi-Fidelity Design Methodology Leveraging on Acoustic Drivers

Autorzy: Chloé Dumont, Lieven Baert, Ingrid Lepot
Opublikowane w: Volume 2D: Turbomachinery, 2020, ISBN 978-0-7918-8409-6
Wydawca: American Society of Mechanical Engineers
DOI: 10.1115/gt2020-15846

Aerodynamics issues related to hybrid electric propulsion” , Online conference “Clean Sky 2 technology progress – contribution to the environmental performance of the next generation of aircraft

Autorzy: G. Mingione, G. Andreutti, D. Cinquegrana, D. de Rosa, N. Minervino, A. Pagano, D. Quagliarella, P. Vitagliano, A. Visingardi
Opublikowane w: 2021
Wydawca: Madrid University

"""Measurement of noise and indoor climate on board a turbprop airplane flight"""

Autorzy: Benjamin Müller, Andreas Lindner, Victor Norrefeldt, Yu Song, Neil Mansfield, Peter Vink
Opublikowane w: 2022
Wydawca: ICAS

"FTB#1 Adaptive Wing Integrated Demonstrator"

Autorzy: Carossa GM
Opublikowane w: 2022
Wydawca: AIAA SCITECH

"""Coupling of a zonal air and temperature distribution model with an low pressure ECS ducting model"""

Autorzy: """ Victor Norrefeldt, Andreas Lindner, Katherine Urzua-Reichl, Patricia Korth, Christina Matheis, Manuel Munoz-Sanchez"
Opublikowane w: 2022
Wydawca: EASN

Wind tunnel tests of a three-lifting surface regional aircraft

Autorzy: V. Cusati, S. Corcione, F. Nicolosi, D. Ciliberti
Opublikowane w: Chinese Journal of Aeronautics., 2021
Wydawca: Chinese Journal of Aeronautics.

DEEP LEARNING ALGORITHMS FOR DELAMINATIONS DETECTION ON COMPOSITES PANELS BY WAVEPROPAGATION SIGNALS ANALYSIS

Autorzy: E. Monaco, M. Rautela, S. Gopalakrishnan, F. Ricci
Opublikowane w: Draf Conference 2022, 2022
Wydawca: Draf Conference

Development of a Low-Cost, High Accuracy, Flexible Panel Indexing Cell with Modular, Elastic Architecture

Autorzy: BROWNBILL, RoberT and ROBERTS, Adam
Opublikowane w: 2020
Wydawca: ELECTROIMPACT

"""Use of the flight test facility mock-ups in the european Clean Sky 2 program"""

Autorzy: Victor Norrefeldt, Florian Mayer, Arnav Pathak, Marie Pschirer, Max Kienberger, Andreas Lindner, Sabine Johann, Anna Nagele-Renzl, Michael Buschhaus, Gunnar Grün
Opublikowane w: 2022
Wydawca: EASN

Multiphysics Modeling of a Faulty Rod-End and Its Interaction With a Flight Control Actuator to Support PHM Activities

Autorzy: A.BACCI, A.C. BERTOLINO, A. DE MARTIN, M. SORLI
Opublikowane w: 2021
Wydawca: ASME/IMECE
DOI: 10.1115/imece2021-71095

Drag bookkeeping on an aircraft with riblets and NLF control

Autorzy: Benedetto Mele Lorenzo Russo Renato Tognaccini
Opublikowane w: Aerospace Science and Technology, 2020
Wydawca: elssevier
DOI: 10.1016/j.ast.2020.105714

RELIABILITY ASSESSMENT OF DAMAGE DETECTION TECHNIQUES BASED ON GUIDED ULTRASONIC WAVES

Autorzy: D - Pecora, R. (UNINA)
Opublikowane w: Mimic nature seeking for intelligent aerospace engineering system, 2020
Wydawca: Medyna

Hybrid Aircraft Design Tools and Applications to Regional Turboprop

Autorzy: F. Nicolosi, F. Orefice, S. Corcione
Opublikowane w: on line conference Electric & Hybrid Aerospaice Technology Virtual ‘Live’, April 20th 2021, 2021
Wydawca: Electric & Hybrid Aerospaice Technology Virtual

Experimental Validation of Propeller Effects on a Transport Aircraft Configuration

Autorzy: L.P. Ruiz Calavera, S. De Lucas Bodas, D.E. Funes Sebastian
Opublikowane w: ICAS 21, 2021
Wydawca: ICAS

Failure modes analyses and impact on aeroelastic stability of a regional aircraft equipped with morphing winglets

Autorzy: I. Dimino, M. C. Noviello, R. Pecora†, and A. Concilio
Opublikowane w: AEC2020, 2020
Wydawca: AEC2020

The DressMAN 3.2-System for evaluation of thermal comfort in the Passenger Cabin Ground Demonstrator

Autorzy: Michael Visser, Sumee Park, Sebastian Stratbücker, Victor Norrefeldt, Andreas Lindner
Opublikowane w: virtual / Salerno, 2021
Wydawca: virtual / Salerno

Hybrid Aircraft Design Tool and Applications to Regional Turboprop

Autorzy: F. Orefice, F. Nicolosi, D. Ciliberti
Opublikowane w: electric & hybrid aerospace Technology (Virtual Conference), 2021
Wydawca: electric & hybrid aerospace Technology

"""Replacement of Hexavalent Chromium an LCA Study"""

Autorzy: Ali Bahwan
Opublikowane w: 2022
Wydawca: EASN

Dressman 3.2 - A novel method to determine the equivalent temperature for comfort assessment in the aircraft

Autorzy: Michael Visser, Andreas Lindner, Sumee Park, Sebastian Stratbücker, Victor Norrefeldt
Opublikowane w: EASN Conference - September 2021, 2021
Wydawca: ICAS

Aerodynamics of hybrid electrical propulsion

Autorzy: G. Mingione, G. Andreutti. D.Cinuegrana, D de Rosa, M. Minervino, A. Pagano, D. Quagliarella, P. Vitagliano, A. Visingardi
Opublikowane w: on line conference Electric & Hybrid Aerospaice Technology Virtual ‘Live’, April 20th 2021, 2021
Wydawca: Electric & Hybrid Aerospaice Technology

Multibody Dynamic Adams Model of a Ball Screw Mechanism With Recirculation Channel

Autorzy: A.BACCI, A.C. BERTOLINO, A. DE MARTIN, M. SORLI
Opublikowane w: 2021
Wydawca: ASME/IMECE 2021
DOI: 10.1115/imece2021-71121

From Concept to Wind Tunnel Model: Efficient Design Methodology For Innovative Low-Noise Propellers

Autorzy: L. Baert, G. Grasso, C. Sainvitu, I. Lepot, M.J. van Enkhuizen, K. Lammers, N. Bown
Opublikowane w: 2022
Wydawca: Turbo Expo

Embedded Electronically Steerable SATCOM Aero Antenna development for Clean sky 2 project

Autorzy: Gal, G.Exposito, B. Marinov, D. Hristov, I. Ivanov, R. Stoyanov, V. Peshlov
Opublikowane w: EuCAP 2021: 15th European Conference on Antennas and Propagation. Dusseldorf, Germany, 2021
Wydawca: EuCap

Drag reduction in a turbulent boundary layer with sinusoidal riblets

Autorzy: G. Cafiero and G. Iuso
Opublikowane w: 2021
Wydawca: Experimental Thermal and Fluid Science

"""Disruptive Technologies Certification Process"""

Autorzy: tbd (CIRA), tbd (GE AVIO)
Opublikowane w: 2022
Wydawca: TSAS

DESIGN OF AN INNOVATIVE WING TIP FOR AEROELASTIC CONTROL: FROM SCRATCH TO FLIGHT TEST

Autorzy: Toffol F., Fonte F., Ricci, S.
Opublikowane w: 2022
Wydawca: ICAS

Hybridization and Mission Analysis of ATR-42

Autorzy: F. Orefice, F. Nicolosi, S. Corcione, P. Della Vecchia, D. Ciliberti, M. Ruocco
Opublikowane w: AIAA AVIATION 2021 FORUM, 2021
Wydawca: AIAA AVIATION 2021 FORUM

Optimization of compliant adaptive structures in the design of a morphing droop nose, accepted for publication on Smart Mater

Autorzy: V.Cavalieri, A.De Gaspari and S.Ricci
Opublikowane w: 2020
Wydawca: Struct. 0 (2020) , IOP Publishing
DOI: 10.1088/1361-665x/ab8902

Affordable Flight Control System: design and testing

Autorzy: L. Cosin & A.Jimenez, AIRBUS DS
Opublikowane w: The role of Airbus DS in the leadership of the Regional Multimission demonstrator of Clean Sky 2” (Universidad Carlos III de Madrid,, 2020
Wydawca: ONLINE

Performance Improvements of a Regional Aircraft by Riblets Natural Laminar Flow

Autorzy: P. Catalano, D. de Rosa, B. Mele, R. Tognaccini and F. Moens
Opublikowane w: 2020
Wydawca: American Institute of Aeronautics and Astronautics,
DOI: 10.2514/1.c035445

"""APPLICATION OF FAULT TOLERANT ARCHITECTURE ON ELECTRO-MECHANICAL LANDING GEAR ACTUATOR"""

Autorzy: BORGARELLI Nicola, D’ANDREA Moreno, PIZZONI Luciano, CIANCALEONI Lorenzo, ALFANO Luigi
Opublikowane w: 2022
Wydawca: TSAS

Aerodynamic benefits of a semi-morphing wing concept

Autorzy: S. De Lucas Bodas, J. Narbona Gonzalez, V. Ossorio Contreras, J.J. Guerra Crespo, D.E. Funes
Opublikowane w: ICAS 21, 2021
Wydawca: ICAS

The DressMAN 3.2-System for evaluation of thermal comfort in the Passenger Cabin Ground Demonstrator

Autorzy: Visser, Michael; Park, Sumee; Stratbücker, Sebastian; Norrefeldt, Victor; Lindner, Andreas
Opublikowane w: 2022
Wydawca: IOP Conference Series Materials Science and Engineering
DOI: 10.1088/1757-899x/1226/1/012114

DESIGN AND EXPERIMENTAL TESTING OF A DROOP NOSE MORPHING FOR ADVANCED REGIONAL AIRCRAFT

Autorzy: De Gaspari, A., Cavalieri, V., and Ricci, S
Opublikowane w: 2022
Wydawca: ICAS

Environmental Impact of Clean Sky 2 Technologies in the Regional Multi-Mission aircraft Configuration

Autorzy: L. Benítez
Opublikowane w: EASN Conf. 1-4 Sept 2021, 2021
Wydawca: EASN Conference

Analysis of riblets performance in pressure gradient flow by Large Eddy Simulation

Autorzy: Benedetto Mele, Renato Tognaccini, Pietro Catalano and Donato de Rosa
Opublikowane w: 2020
Wydawca: AIAA Scitech 2020 Forum
DOI: 10.2514/6.2020-0031

Electromagnetic brake design and testing for EMA aerospace

Autorzy: Moreno D'Andrea; Giovanni Di Domenico; Macera Davide; Francesco Fiume
Opublikowane w: SPEEDAM conference, 2020, ISSN 1987-3878
Wydawca: ieee
DOI: 10.1109/speedam48782.2020.9161834

Towards a methodology for new technologies assessment in aircraft operating cost

Autorzy: V. Vercella, M. Fioriti, N. Viola
Opublikowane w: Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2020
Wydawca: SAGE
DOI: 10.1177/0954410020964675

Design and production of a paint graphenebased sensor system for distributed aeronautical structural monitoring

Autorzy: F. Marra, A. Tamburrano, F.Cozzolino, N.Pesce, M. Fortunato, V.Memmolo, E. Monaco, M.S.Sarto
Opublikowane w: Proceedings of the 12th EASN Conference, 2022
Wydawca: IoP

Design and Experimental Validation of Gust Load Alleviation Systems based on Static Output Feedback

Autorzy: Toffol, F., Marchetti, L., De Gaspari, A., Chardí Espí, J.V., Riccobene, L., Fonte, F., Ricci, S., Mantegazza, P.
Opublikowane w: 2022
Wydawca: AIAA SCITECH
DOI: 10.2514/6.2022-0441

Effects of an innovative distributed propulsion system on a regional aircraft wing configuration,

Autorzy: G. Andreutti, M. Minervino, and G.Mingione
Opublikowane w: 10th EASN International Conference, 2020
Wydawca: EASN

Morphing Wing Technologies within the Airgreen 2 Project

Autorzy: Dimino I, Moens F, Pecora R, De Gaspari A, Ricci S, Ameduri S, Concilio A, Mercurio A and Carossa G.M.
Opublikowane w: 2022
Wydawca: AIAA SCITECH
DOI: 10.2514/6.2022-0718

Wake Preservation Using a Coupled Eulerian-Lagrangian Solver

Autorzy: Christopher Wales, Dorian Jones and Ann Gaitonde
Opublikowane w: 2022
Wydawca: AIAA
DOI: 10.2514/6.2022-4087

FE Modeling And Analysis Validation of an Adaptive Winglet Structure

Autorzy: Pellone, L., Ameduri, S., Dimino, I., Mercurio, U., Concilio, A., Giuliani, M., Capuano, V.
Opublikowane w: 2022
Wydawca: ICMAE
DOI: 10.1109/icmae56000.2022.9852894

GUST AND MANEUVER LOADS ALLEVIATION TECHNOLOGIES: OVERVIEW, RESULTS AND LESSONS LEARNED IN THE FRAMEWORK OF CS2 AIRGREEN2

Autorzy: F. Toffol, L. Marchetti, S. Ricci, E. Capello, S. Malisani
Opublikowane w: 2022
Wydawca: IFASD

Regional Multimission Aircraft Configuration in Clean Sky2: Environmental Impact in Future Configurations and Actual Technology Evaluation from Flight Tests.

Autorzy: Manuel Nunez, Miguel Martinez
Opublikowane w: 2022
Wydawca: EASN

“TOD – Thermoplastics on Doors: Development of full scale innovative composites doors, surrounds and substructure for Regional Aircraft Fuselage barrel on-ground demonstrators” -

Autorzy: A. Miraglia, F. Felline, C. Rocco, A. Ceresa1, U. Raganato, M. Zavala-Arredondo, B. Flipo, G. Liaptsis, J. Riise, X. Cui, M. Wu, S. Sampethai - DEMA, CETMA, TWI, University of Surrey.
Opublikowane w: 10th EASN Virtual International Conference, 2020
Wydawca: EASN

Top-down development of real-time models for simulation of electromechanical actuators

Autorzy: S. AKITANI, A. C. BERTOLINO, J-C. MARE, G. JACAZIO
Opublikowane w: International Conference on Recent Advances in Aerospace Actuation Systems and Components,, 2020
Wydawca: Recent Advances in Aerospace Actuation Systems and Components

Real-time modelling and simulation of electromechanical actuators for virtual flight testing

Autorzy: J-C. MARE, G. JACAZIO, A. C. BERTOLINO, S. AKITANI
Opublikowane w: Journal of Aerospace, 2020
Wydawca: Journal of Aerospace

A three-dimensional contact model for sphere /grooves interactions in a ball-screw

Autorzy: A. Bertolino, G. Jacazio, M. Sorli, S. Mauro
Opublikowane w: 2020
Wydawca: R3ASC

SPARE project: Improvement of continuous compression moulding process for the production of thermoplastic composite beams” -

Autorzy: R. Angiuli - CETMA.
Opublikowane w: 10th EASN Virtual International Conference, 2020
Wydawca: EASN

Multiobjective Optimization for the Aero-Structural Design of Adaptive Compliant Wing Devices

Autorzy: Alessandro De Gaspari
Opublikowane w: Applied Sciences, Numer 10/18, 2020, Strona(/y) 6380, ISSN 2076-3417
Wydawca: Applied Sciences
DOI: 10.3390/app10186380

Development of a Flight Mechanics Simulation Computer based on a Flexible Aircraft Model for a Regional Aircraft

Autorzy: Simone Malisani, Elisa Capello, Giorgio Guglieri
Opublikowane w: IOP Conference Series: Materials Science and Engineering, Numer 1024/1, 2021, Strona(/y) 012066, ISSN 1757-8981
Wydawca: IOP Publishing Ltd
DOI: 10.1088/1757-899x/1024/1/012066

A preliminary top-down parametric design of EMA position control

Autorzy: Jean-Charles Maré
Opublikowane w: Aerospace scientific journal, Numer 22264310, 2022, ISSN 2226-4310
Wydawca: MDPI
DOI: 10.3390/aerospace9060314

Parametric Investigation of a Distributed Propulsion System on a Regional Aircraft

Autorzy: D. de Rosa, E. Morales Tirado, G. Mingione
Opublikowane w: MDPI Aerospace 2022, Numer 22264310, 2022, Strona(/y) 176, ISSN 2226-4310
Wydawca: MDPI
DOI: 10.3390/aerospace9040176

Design of a PHM system for electro-mechanical flight controls: a roadmap from preliminary analyses to iron-bird validation

Autorzy: Andrea De Martin, Giovanni Jacazio, Massimo Sorli
Opublikowane w: MATEC Web of Conferences, Numer 304, 2019, Strona(/y) 04018, ISSN 2261-236X
Wydawca: MATEC
DOI: 10.1051/matecconf/201930404018

Investigation on low velocity impact damage identification with ultrasonic techniques under different sensor network conditions

Autorzy: A Beligni, F Cadini, C Sbarufatti, M Giglio, N Cimminiello, P Salvato, E Monaco, F Romano
Opublikowane w: IOP Conference Series: Materials Science and Engineering, Numer 1024, 2021, Strona(/y) 012027, ISSN 1757-899X
Wydawca: polimi
DOI: 10.1088/1757-899x/1024/1/012027

ENIGMA—A Centralised Supervisory Controller for Enhanced Onboard Electrical Energy Management with Model in the Loop Demonstration

Autorzy: Sharmila Sumsurooah, Yun He, Marcello Torchio, Konstantinos Kouramas, Beniamino Guida, Fabrizio Cuomo, Jason Atkin, Serhiy Bozhko, Alfredo Renzetti, Antonio Russo, Stefano Riverso, Alberto Cavallo
Opublikowane w: Energies, Numer 14/17, 2021, Strona(/y) 5518, ISSN 1996-1073
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/en14175518

Advanced Design of a Full-Scale Active Morphing Droop Nose

Autorzy: Alessandro De Gaspari, Vittorio Cavalieri, Sergio Ricci
Opublikowane w: International Journal of Aerospace Engineering, Numer 2020, 2020, Strona(/y) 1-19, ISSN 1687-5966
Wydawca: Hindawi Publishing Corporation
DOI: 10.1155/2020/1086518

Practical Considerations in the Modelling and Simulation of Electromechanical Actuators

Autorzy: Jean-Charles Maré
Opublikowane w: Actuators, Numer 9/4, 2020, Strona(/y) 94, ISSN 2076-0825
Wydawca: MDPI
DOI: 10.3390/act9040094

Design, Analysis, and Testing of a Scaled Propeller for an Innovative Regional Turboprop Aircraft

Autorzy: Ciliberti Danilo, Nicolosi Fabrizio
Opublikowane w: Aerospace, Numer Vol 9 Numer 5, 2022, Strona(/y) 18, ISSN 2226-4310
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/aerospace9050264

Morphing wing flaps for large civil aircraft: Evolution of a smart technology across the Clean Sky program

Autorzy: Rosario Pecora
Opublikowane w: Chinese Journal of Aeronautics, 2020, ISSN 1000-9361
Wydawca: Press of Acta Aeronautica et Astronautica Sinica
DOI: 10.1016/j.cja.2020.08.004

Design Evolution and Wind Tunnel Tests of a Three-Lifting Surface Regional Transport Aircraft

Autorzy: Vincenzo Cusati, Salvatore Corcione, Danilo Ciliberti, Fabrizio Nicolosi
Opublikowane w: Aerospace 2022, Numer Vol 9 Numer 3, 2022, Strona(/y) 23, ISSN 2226-4310
Wydawca: Multidisciplinary Digital Publishing Institute (MDPI)
DOI: 10.3390/aerospace9030133

Capabilities of the Regional Cabin Demonstrator as digital twin for a future test mock-up

Autorzy: A J M Lindner, V Norrefeldt
Opublikowane w: IOP Conference Series: Materials Science and Engineering, Numer 1024/1, 2021, Strona(/y) 012104, ISSN 1757-8981
Wydawca: IOP Publishing Ltd
DOI: 10.1088/1757-899x/1024/1/012104

Design and Optimization of a Large Turboprop Aircraft

Autorzy: Fabrizio Nicolosi, Salvatore Corcione, Vittorio Trifari, Agostino De Marco
Opublikowane w: Aerospace, Numer 8/5, 2021, Strona(/y) 132, ISSN 2226-4310
Wydawca: AerospaceOpen AccessVolume 8, Issue 5May 2021 Article number 132,
DOI: 10.3390/aerospace8050132

Wyszukiwanie danych OpenAIRE...

Rezultaty

Publikacje

Udostępnij tę stronę

Pobierz