Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski pl
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
Zawartość zarchiwizowana w dniu 2024-04-19

Low emission combustor technology phase II

Cel

During the 3 year interim phase of the programme three selected concepts

will be investigated in detail,
their potential of NOx reduction will be measured and
an evaluation of these methods concerning air worthiness will be performed.
Theme I: Rich Burn, Quick Quench, Lean Burn Combustion (RQL)
The design and development of a rich burn combustor (RQL) were supported by tubular combustor tests, by flow visualization in perspex models and by extensive measurements in a rectangular sector combustor. The specific problems resulting from extreme temperatures in the rich burning zone and the need for rapid quench in the zone to follow were addressed by a specific cooling task.

Theme II: The Lean, Premixed and Prevaporized Combustion (LPP)
For the development of a lean premixed, prevaporized combustor (LPP), fundamental investigations were concentrated on prevaporizer ducts and the premix systems. Because of the particular problems caused by reverse flow layout and the requirements for small size and low cost inherent with small engines, the combustor investigations were split into two tasks: ducts for large engines and ducts for small engines.

Theme III: The Double Annular Combustor (DAC)
The investigations of the double annuar combustor (DAC) such as lean stability, altitude relight, low power efficiency and NOx control, fuel staging and combustor exit temperature distribution were of more basic nature. While these fundamental tests were carried out in low pressure and intermediate pressure rigs, the final configuration experiments were conducted under engine relevant conditions.

Theme IV: Validation of CFD-Combustion Models (CFD)
The results of selected measurements were added to a common database which could be used to evaluate the tests, compare the different combustor standards and to numerically predict and optimize the behaviour of the different combustors with advanced CFD methods.

The results from the Low NOx II programme confirm that assuming the requisite research work is continued in future and the development of appropriate combustors is initiated and progress demonstrated, a reduction of 60 % to 80 % in nitrogen oxides from current levels appears to be feasible by the end of the century.
Further objectives of the low emission combustor programme in the interim phase comprise

the strengthening of the scientific and technological basis for the development of ultra low NOx combustion methods and
the provision of new or improved tools and techniques for analysis, prediction and control of aero engine exhaust emissions.

However, the major long term objective for the Low Emission Combustor team is the translation of the best suited concepts into a practical combustor and to test it at engine operating conditions, which requires both a reliable continuation of the research work and sufficient financial support of the partners involved.

Dziedzina nauki (EuroSciVoc)

Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.

Aby użyć tej funkcji, musisz się zalogować lub zarejestrować

Program(-y)

Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.

Temat(-y)

Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.

Brak dostępnych danych

Zaproszenie do składania wniosków

Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.

Brak dostępnych danych

System finansowania

Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.

CSC - Cost-sharing contracts

Koordynator

Motoren- und Turbinen-Union München GmbH (MTU)
Wkład UE
Brak danych
Adres
Dachauer Straße 665
80995 München
Niemcy

Zobacz na mapie

Koszt całkowity

Ogół kosztów poniesionych przez organizację w związku z uczestnictwem w projekcie. Obejmuje koszty bezpośrednie i pośrednie. Kwota stanowi część całkowitego budżetu projektu.

Brak danych

Uczestnicy (18)

Moja broszura 0 0