Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski pl
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
Zawartość zarchiwizowana w dniu 2022-12-27

MECHANICAL RECOVERY OF BIOMASS LINKED WITH BRUSHWOOD CLEARING OPERATIONS

Cel

To collect for energy purposes the biomass resulting from scrub clearance of Mediterranean forestry areas. The scrub clearance is carried out by use of a specially designed machine. The project involves total scrub clearance of 120 ha in the Departements du Gard and du Var. The goal is the scrub clearance of 1 ha/d which would yield +/- 20 T/d of fresh biomass collected.
The project has shown, on the basis of the two 120 ha works done in the Departements du Gard and du Var, that, with some minor improvements done during the project, the equipment is very efficient. However, the yield is very dependent on the working conditions.
The influence of different parameters such as weather conditions, vegetation characteristics, plot topography and soil nature have been highlighted.
The hilly and stony nature of the Mediterranean relief has only allowed the harvesting of the cut biomass for one third of the areas cleared. For these areas, the biomass recovery yield was very satisfactory and amounted to
56 m3/ha while 1.15 ha/day was cleared. Under these later circumstances and taking into account the income resulting from scrub clearance, the production cost per energy unit is well below the (November 1988) fuel oil price.
However, the wood chips produced must also find a final user which is located close enough to the production site. In the present project, it was only possible to sell 15 % of the biomass recovered.
Generally speaking, one may say that positive economic results for biomass recovery and use will only normally be achieved provided that the following conditions are fulfilled: soil not too stony and not too hilly, vegetation dense enough and transport distance to the final user not too high.
The machine used called "Scorpion" and developed from a prototype, carries out the functions of cutting, harvesting, grinding, storage and transport of the biomass.

It was specially designed to work in the difficult vegetation and relief conditions of the Mediterranean forestry.

The machine is 7m long, 3m high and 2,16m wide. It is able to cut trees with a maximum diameter of 25 cm soft wood. The storage capacity is about 7 m3 and the power is 240 hp.

The biomass collected is to be used for heating purposes. The harvesting of biomass allows also the reduction in the cost of scrub clearance which is in several cases necessary to reduce the fire risks.

Dziedzina nauki (EuroSciVoc)

Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.

Projekt nie został jeszcze sklasyfikowany według klasyfikacji EuroSciVoc.
Wskaż dziedziny nauki, które twoim zdaniem są najbardziej istotne z punktu widzenia tego projektu i pomóż nam usprawnić naszą usługę klasyfikacji.

Aby użyć tej funkcji, musisz się zalogować lub zarejestrować

Program(-y)

Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.

Temat(-y)

Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.

Zaproszenie do składania wniosków

Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.

Brak dostępnych danych

System finansowania

Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.

DEM - Demonstration contracts

Koordynator

C.I.M.A.F.
Wkład UE
Brak danych
Adres
BVD CARNOT PROLONGE 7 BP 17
51310 ESTERNAY
Francja

Zobacz na mapie

Koszt całkowity

Ogół kosztów poniesionych przez organizację w związku z uczestnictwem w projekcie. Obejmuje koszty bezpośrednie i pośrednie. Kwota stanowi część całkowitego budżetu projektu.

Brak danych
Moja broszura 0 0