Cel
The industrial use of some materials (high strength steels, super alloys and ceramics) is at present limited due to their poor machinability.
Preliminary studies on LAM have shown that cutting force reductions of from 20 to 50% have been obtained on Inconel type alloys and high strength steels, resulting in some cases in tool wear reductions of 20%. This has allowed directions for research work to be defined and pursued to optimize LAM.
The objective of this project is to provide industry with technological data on materials having different properties so as to give information on machining cost reductions.
To reach the target, LAM tests have been carried out, with laser beam analysis (conditions of plasma forming), thermal gradients and vibrations measurements), and completed by optical, thermal and mechanical parametric modelling of LAM.
The economic evaluation of LAM processes has been performed through assessment of gains brought by laser assistance during machining, in terms of cutting forces, tool wear, catastrophic tool breakage and vibration reductions, and machined parts quality improvement.
Some demonstration parts have been laser assisted machined leading first to demonstrate that the process is applicable on complex shapes and second to estimate part costs.
It can be said that during this programme progress has been made in the better understanding of these materials and the machining of them, when assisted by laser. While it is clear that the LAM process is not applicable nor desirable in all machining operations, it is equally clear that under certain circumstances, with certain conditions, LAM is indeed, a process that will produce components quicker and at a lower price.
The industrial use of some materials (high strength steels, super alloys and ceramics) is at present limited due to their poor machinability.
Preliminary studies on LAM have shown that cutting force reductions of from 20 to 50% have been obtained on Inconel type alloys and high strength steels, resulting in some cases in tool wear reductions of 20%. This has allowed directions for research work to be defined and pursued to optimize LAM.
The objective of this project is to provide industry with technological data on materials having different properties so as to give information on machining cost reductions.
Dziedzina nauki (EuroSciVoc)
Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc
Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc
- inżynieria i technologiaprzemysł maszynowyinżynieria produkcjiobróbka skrawaniem
- inżynieria i technologiainżynieria materiałowaceramika
- nauki przyrodniczenauki fizyczneoptykafizyka laserów
Aby użyć tej funkcji, musisz się zalogować lub zarejestrować
Przepraszamy… podczas wykonywania operacji wystąpił nieoczekiwany błąd.
Wymagane uwierzytelnienie. Powodem może być wygaśnięcie sesji.
Dziękujemy za przesłanie opinii. Wkrótce otrzymasz wiadomość e-mail z potwierdzeniem zgłoszenia. W przypadku wybrania opcji otrzymywania powiadomień o statusie zgłoszenia, skontaktujemy się również gdy status ulegnie zmianie.
Temat(-y)
Brak dostępnych danychZaproszenie do składania wniosków
Brak dostępnych danychSystem finansowania
Brak dostępnych danychKoordynator
75724 Paris
Francja