Cel
The aim of the project is to build a heat accumulator in Oulu Finland by chancing the old rock caverns used as an oil storage into a heat storage. The accumulator is going to be an extra buffer between heat production and consumption. It smoothens the variations needed in the heat supply because of the changing DH demand. Larger heat demand during the day time helps to increase CHP electricity production and improves the economy of Oulu Energy Works. The expected energy saving is up to 4400 TOE/y when compared to separate heat and electricity production.
Test runs and the preheating made have proved that the technical performance of the storge is like planned. Diffusor pipes are working properly and there has not occured any mixing of temperature layers and warm water have spread all the way to the far most end of the storage. Temperature layers have stayed unmixed as well during tie-up periods.
The temperature of the water in the top level has varied between 63°C to 95°C and heat content has varied between 1.4 GWH to 7.1 GWH. The total energy transfer through the storage has been 18.0 GWH/A in the first year of operation. The temperature monitoring of the storage water started with the first preheating. The storage water has been analysed in July and it was compared to the earlier results. pH value has changed from 8.3 to 8 compared with the results gotten in March. Iron content of the water have risen from the state it was before the preheating session. Also the percentage of chloride has risen. These imply that there has been some dissolution of the minerals in the rock cavern.
The temperature of the ambient rock have been measured 23 January 1997 and 12 June 1997. The measurements were made from the small drill hole 5 meters from the cavern where it was 54.7°C (63.7°C). Then storage water temperature at that level was 85°C (86°C).
The influence of the storage to the ground level was measured 21st January 1997 and 5 September 1997. The highest increase of the ground level was 15 mm and 22 mm in respectively.
One of the most expected problems was the separation of petrol residues. The separation of petrol has continued with the charging (and discharging) cycles. Gaseous petrol has been burned in two torches at the cavern site; The flames at the torches have been decreasing and now they are faded down.
The idea of this project is to build a hot water based heat reservoir into an old oil storage cavern. The rock cavern forms a large storage volume of 200000 m³ that is functionning at a pressure level of 4-6 bars. The construction of the storage is cheap and relatively simple compared with a steel tank type accumulator.
The accumulator is equipped with special nozzles to guarantee a laminar and even distribution of the water druing the charging and discharging. This is to maximise the capacity of storage by keeping hot and cold layers of water separate and at the same time enabling a high charging/discharging power.
Connection to the DH network is made through heat exchangers, which prevents the dirt from the cavern to enter the DH network. There are notable seasonal and daily changes in the electricity and district heating loads of Oulu Energy works. The electricity load changes between day and night and the DH load varies naturally a lot from summer to winter but less between day and night. There is a lack of DH load in combined heat and power production during the warm season and daytime.
The existing CHP plants are a peat fired CHP unit, Toppila I, with a total production capacity of 67.9 MWe and 145 MWth and a second unit Topilla II : 127 MWe and 170 Mwth. The electricity is also generated by hydro power and the rest of the demand is covered by electricity from the state network. Heat storage raises production of electricity from the state network. Heat storage raises production of electricity by CHP by 20 GWh/Y and this reduces the total energy consumption by 50 GWH/Y. The storage also improves the reliability of heat supply.
During the first two years the temperatures of storage water and rock and movements of the rock walls are measured once an hour, once a day and once a month respectively. The information about the measurements will be collected by a local process computer system. The information is processed and analysed by Ekono Energy Ltd.
Dziedzina nauki (EuroSciVoc)
Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.
Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.
- inżynieria i technologia przemysł maszynowy inżynieria termodynamiczna ciepłownictwo
- inżynieria i technologia inżynieria elektryczna, inżynieria elektroniczna, inżynieria informatyczna przemysł elektrotechniczny energetyka produkcja energii elektrycznej kogeneracja
- nauki przyrodnicze nauki chemiczne chemia organiczna węglowodory
Aby użyć tej funkcji, musisz się zalogować lub zarejestrować
Program(-y)
Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.
Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.
Temat(-y)
Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.
Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.
Zaproszenie do składania wniosków
Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.
Brak dostępnych danych
Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.
System finansowania
Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.
Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.
Koordynator
90100 Oulu
Finlandia
Ogół kosztów poniesionych przez organizację w związku z uczestnictwem w projekcie. Obejmuje koszty bezpośrednie i pośrednie. Kwota stanowi część całkowitego budżetu projektu.