European Commission logo
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
Zawartość zarchiwizowana w dniu 2024-04-15

IMPROVED DESIGN FOR GLASS MELTING KILN

Cel

THE OBJECTIVES ARE :

A) TO DEVELOP A COMPUTER CODE FOR THE SIMULATION AND DESIGN OF INDUSTRIAL GLASS KILN AND TO APPLY IT FOR ENGINEERING DESIGN OF GLASS MELTING KILNS.

B) TO CONDUCT A PROGRAMME OF EXPERIMENTS TO DETERMINE THE FLOW AND HEAT-TRANSFER CHARACTERISTICS IN THE GLASS MELTING KILN.

TO ACHIEVE THIS OBJECTIVE, COORDINATE EXPERIMENTAL PROGRAMME WILL BE CARRIED OUT IN THREE COUNTRIES (PORTUGAL, GERMANY, UNITED KINGDOM) AND THE RESULTS WILL BE USED TO GUIDE A FINAL EXPERIMENTAL PROGRAMME IN ONE OF THE FURNACES OF THE PORTUGUESE COMPANY, METAL. THE BASIS FOR THE NUMERICAL DESIGN PROCEDURE WILL BE PERFORMED IN LISBON AND FURTHER DEVELOPED IN THE THREE COUNTRIES.

THE DEVELOPMENT OF THE CALCULATION METHOD IS INNOVATED IN THAT NOVEL NUMERICAL PROCEDURES WILL BE REQUIRED TO DEAL WITH THE OXYGEN-RICH ATMOSPHERE AND WITH THE SUBSTANTIAL RADIATION. THESE DEVELOPMENTS WILL BE GUIDED BY EXPERIMENTS PERFORMED IN THE THREE CONFIGURATIONS, NAMELY A LOW TEMPERATURE SIMULATION OF A GLASS FURNACE, A COMBUSTING AXISYMMETRICAL FURNACE AND IN A FULL SCALE GLASS FURNACE. THIS OVERALL APPROACH IS TOTALLY NEW TO THE GLASS-FURNACE INDUSTRY.

THE RD WORK IS DIVIDED IN TO THE FOLLOWING STEPS :

- COMPUTER CODE DEVELOPMENT
- COLD FLOW TESTING
- BURNER TESTING
- KILN TESTING
- COMPARISON OF CALCULATED AND MEASURED RESULTS
- PROVISIONS OF NEW DESIGNS AND DESIGN METHOD.

Temat(-y)

Data not available

Zaproszenie do składania wniosków

Data not available

System finansowania

CSC - Cost-sharing contracts

Koordynator

UNIVERSITY OF ERLANGEN-NUREMBERG
Wkład UE
Brak danych
Adres
Egerlandstrasse 1
91058 ERLANGEN
Niemcy

Zobacz na mapie

Koszt całkowity
Brak danych

Uczestnicy (4)